Results 1 to 10 of about 473 (275)
Twin-roll strip casting of magnesium alloys in China
Transactions of Nonferrous Metals Society of China, 2008 Abstract The development status of twin-roll strip casting for magnesium alloys in China was summarized as well as the new progress when several kinds of twin-roll strip casting technologies were developed and used. Horizontal twin-roll casting (HTRC) of magnesium alloys has attracted much attention and has been industrialized in China. Vertical twin
Fu-Sheng Pan, Bin Jiang
exaly +3 more sources
Mg-Based Materials with Quasiamorphous Phase Produced by Vertical Twin-Roll Casting Process
Metals, 2020 Metallic materials with micron grains, submicron grains, or amorphous structures have attracted great interest in recent decades owing to their excellent mechanical properties and corrosion resistance.
Hai Liu +3 more
doaj +2 more sources
Metals, 2022 In this investigation, strips of an experimental Al-Mn-Cu-Be alloy were manufactured by high-speed single-roll and twin-roll casting to stimulate the formation of a quasicrystalline phase during solidification.
Franc Zupanič +3 more
doaj +1 more source
High Speed Roll Caster for Aluminum Alloy
Metals, 2021 Two types of high-speed twin-roll casters and a single-roll caster equipped with a scraper were proposed. One of the twin-roll casters is a vertical-type high-speed twin-roll caster, and the other twin-roll caster is an unequal-diameter twin-roll caster.
Toshio Haga
doaj +1 more source
Metals, 2022 Tool steel for hot working is usually used for the rolls of conventional twin-roll casters for aluminum alloys. In a vertical high-speed twin-roll caster, copper rolls are used to rapidly solidify the aluminum alloys and to increase the casting speed ...
Toshio Haga, Yukihiro Kurahashi
doaj +1 more source
Journal of Hebei University of Science and Technology, 2023 In order to solve the problems of strip break and strip bulging in the commissioning process of thin strip continuous casting industrial production line and improve the solidification structure and surface quality of thin strip continuous casting, an ...
Suling LU +6 more
doaj +1 more source
Progress in twin roll casting of magnesium alloys: A review
Journal of Magnesium and Alloys, 2021 Twin roll casting was commercialized for a strip production from ferrous and non-ferrous alloys in the 1950s; however, its application to magnesium has proven difficult and still creates major challenges. This report describes global efforts in expanding
Amjad Javaid, Frank Czerwinski
doaj +1 more source
Casting of clad strip using a twin roll caster
The Proceedings of the Materials and processing conference, 2000 A twin roll caster to cast clad strip was designed and assembled. This twin roll caster could cast clad strips of aluminum alloys at the speed of 20 m/min. Thickness of the clad strip was about 2.0 mm. The clad strip had a clear interface between the two strips. The clad strip was connected strongly at the interface.
Toshio Haga, Shinsuke Suzuki
openaire +2 more sources
Effect of Nano-Sized TiC-TiB2 on Microstructure and Properties of Twin-Roll Cast Al-Cu-Mn-Zr Alloy
Metals, 2022 Al-5Cu-0.8Mn-0.1Zr strips produced during a twin-roll-casting process are investigated in this paper. Central segregation does occur in the alloy strip, and the segregation is a mixture of Al2Cu and Al20Cu2Mn3 eutectic phases.
Jiaming Cao +4 more
doaj +1 more source
Numerical Analysis of Twin-Roll Casting of Strips With Profiled Cross-Section [PDF]
Materials Research, 2018 The relatively high production costs of innovative materials with tailored properties such as Tailor Welded Blanks, Patchwork Blanks, Tailor Heat Treated Blanks and Tailor Rolled Blanks are responsible for a growing interest in new cost-effective ...
Serhii Bondarenko +3 more
doaj +1 more source