Results 11 to 20 of about 12,750 (288)
Effect of Nano-Sized TiC-TiB2 on Microstructure and Properties of Twin-Roll Cast Al-Cu-Mn-Zr Alloy
Metals, 2022 Al-5Cu-0.8Mn-0.1Zr strips produced during a twin-roll-casting process are investigated in this paper. Central segregation does occur in the alloy strip, and the segregation is a mixture of Al2Cu and Al20Cu2Mn3 eutectic phases.
Jiaming Cao +4 more
doaj +1 more source
Mg-Based Materials with Quasiamorphous Phase Produced by Vertical Twin-Roll Casting Process
Metals, 2020 Metallic materials with micron grains, submicron grains, or amorphous structures have attracted great interest in recent decades owing to their excellent mechanical properties and corrosion resistance.
Hai Liu +3 more
doaj +1 more source
Numerical Analysis of Twin-Roll Casting of Strips With Profiled Cross-Section [PDF]
Materials Research, 2018 The relatively high production costs of innovative materials with tailored properties such as Tailor Welded Blanks, Patchwork Blanks, Tailor Heat Treated Blanks and Tailor Rolled Blanks are responsible for a growing interest in new cost-effective ...
Serhii Bondarenko +3 more
doaj +1 more source
Twin Roll Caster for Clad Strip
Metals, 2021 Production of aluminum alloy clad strips requires many processes, and a reduction in the number of processes has long been demanded. A method to cast clad strips directly from molten metal using a twin roll caster with copper rolls is proposed in this ...
Toshio Haga
doaj +1 more source
Casting Process at Roll Bite in Strip Cast Using Vertical-Type High-Speed Twin-Roll Caster
Metals, 2022 The solidification process in strip casting using a vertical-type high-speed twin-roll caster was clarified by inserting a 0.1 mm diameter K-type thermocouple into a strip during casting.
Toshio Haga, Yukihiro Kurahashi
doaj +1 more source
High-Speed and Low-Load Twin-Roll Casting of Al–5%Mg Strip
Metals, 2022 A conventional twin-roll caster usually casts strips at a speed slower than 2 m/min and a roll load greater than 2 kN/mm. A vertical-type high-speed twin-roll caster can cast aluminum alloy strips at a speed higher than 10 m/min and a roll load smaller ...
Kazuki Yamazaki, Toshio Haga
doaj +1 more source
Chinese Journal of Mechanical Engineering, 2018 During the oscillating twin-roll strip casting process, the quality of final products is directly influenced by the flow field distribution of molten metal in the pool.
Zhi-Qiang Xu +4 more
doaj +1 more source
Analysis of the influence parameters on steel strip defects in continuous roll casting-rolling
Mechanics and Advanced Technologies, 2023 Problem. The casting-rolling process is currently one of the most effective and promising processes used for the production of steel sheets. The advantages of this process include the small dimensions of the unit and a significant reduction in energy ...
Alexey Nogovitsyn +4 more
doaj +1 more source
Modelling of twin‐roll strip casting processes
Communications in Numerical Methods in Engineering, 2003 AbstractIn this work, a twin‐roll strip casting industrial process is analysed using a fixed‐mesh finite element formulation able to deal with unsteady incompressible thermally coupled flows including phase‐change and non‐Newtonian effects assumed to account for the flow behaviour during the whole cooling conditions.
Cruchaga, MA, Celentano, DJ, Lewis, RW
openaire +4 more sources
Microstructure control during twin roll casting of an AZ31 magnesium alloy [PDF]
, 2012 The existing twin roll casting technique for magnesium alloys suffers heterogeneity in both microstructure and chemistry and downstream processing is required to improve the strip quality, resulting in cost rise.
Ferry M, I Bayandorian, Y Huang, Z Fan
core +1 more source