Results 31 to 40 of about 1,134,620 (95)
Study on Friction Loss of Carcass in Un-bonded Flexible Riser
With the continuous development of offshore oil and gas resources, the application of un-bonded flexible risers has become more widespread. When the vessel hoisting flexible riser on the surface of the water experience irregular movement, the flexible ...
Li Wenbo +3 more
doaj
Modeling Biocemented Sands: Hypoplastic Model for MICP‐Based Ground Improvement
ABSTRACT Bio‐cementation offers a sustainable and low‐carbon alternative to conventional ground improvement methods, aligning with the growing demand for green geotechnical solutions. To enable reliable numerical simulation of bio‐cemented soil behavior in engineering applications, advanced constitutive models are required to account for the effects of
Merita Tafili +3 more
wiley +1 more source
A thermal transfer printing strategy is presented for fabricating mechanically robust, wash‐durable electronic textiles. A dual‐crosslinked PEDOT:PSS composite combines molecular stabilization with TPU‐mediated interfacial compatibility, while molten hot‐melt adhesive penetrates textile pores to create mechanical interlocking.
Mingtian Geng +13 more
wiley +1 more source
Advances on Failure of Carcass Layer in Un-bonded Flexible Riser
The non-bonded flexible riser is an important part of the subsea production system. The carcass layer is used as the innermost transportation channel of the non-bonded flexible riser, which would damage the entire riser structure when fails, and result ...
Xu Xiaoxuan +4 more
doaj
Large‐scale tests of 50‐year‐old prestressed concrete bridge girders
Abstract An experimental investigation has been carried out as part of the BRIDGE|50 research project, focusing on large‐scale loading tests performed on five 50‐year‐old prestressed concrete (PC) girders. The study aimed at evaluating the structural response of five girders retrieved from a viaduct in the urban area of Turin, Italy, subjected to 4 ...
Francesco Tondolo +7 more
wiley +1 more source
Mechanics‐based model for cold joints in reinforced concrete members
Abstract This study introduces a mechanics‐based numerical model to characterize the behavior of cold joints in reinforced concrete members subjected to monotonic loading. The model incorporates mechanisms such as interface slip and opening, aggregate interlock, clamping force, and dowel action of the reinforcing bars crossing the interface.
Brandon Li +3 more
wiley +1 more source
Halide perovskite solar cells are fabricated with self‐encapsulation by lamination between two glass substrates using rapid Joule heating, yielding a 99% reduction in lamination time compared to previous studies. An 18% efficient cell is laminated in 5 s, demonstrating the potential for scalable manufacturing. ABSTRACT Perovskite solar cells (PSCs) are
Oluka Okia +9 more
wiley +1 more source
A laser‐assisted method enables adhesive‐free and mask‐free patterning of gold and silver leaf on flexible polymer substrates achieving ≈100 µm resolution without lithography. The method is suitable for electrochemical sensors for chemical and biochemical sensing.
Mehraneh Tavakkoli Gilavan +2 more
wiley +1 more source
Vortex-induced vibration of catenary riser: reduced-order modeling and lock-in analysis using wake oscillator [PDF]
A new reduced-order model capable of analyzing the vortex-induced vibration of catenary riser in the ocean current has been developed. This semi analytical-numerical approach is versatile and allows for a significant reduction in computational effort for
O'Brien, P. +4 more
core +3 more sources
Evaluation of the impact of acidic dopants (HCl vs. H2SO4) on bio‐derived luffa/polyaniline composites for methylene blue adsorption. Sustainable and low‐cost Luffa cylindrica/polyaniline (LC/PAN) composite adsorbents were developed for the removal of methylene blue (MB) from aqueous solutions. The effect of acid dopants (hydrochloric acid and sulfuric
Rayane Mehennaoui +5 more
wiley +1 more source

