Results 231 to 240 of about 2,215,344 (291)
Some of the next articles are maybe not open access.
VERTICAL LOADING OF TEMPERATURE CABLES
Transactions of the ASAE, 1991The vertical loads imposed by wheat on five different temperature cables in a full-scale bin were measured. Tests were conducted to determine the influence of radial positioning of the cable, grain discharge rate, starting H/D ratio, and detention time on the vertical loads.
Schwab, Charles +3 more
openaire +2 more sources
Rate of Loading Parameters for Vertically Loaded Piles in Clay
Offshore Technology Conference, 1984ABSTRACT The analysis of 152 laboratory tests and 32 pile load tests confirms that for clays, the faster the rate of loading, the higher the undrained shear strength and the higher the pile capacity. The data shows that the gain in undrained shear strength due to increasing rate of loading increases with increasing ...
J.L. Briaud, E. Garland, G.Y. Felio
openaire +1 more source
Failure Loads of Vertical Anchor Plates in Sand
Journal of the Soil Mechanics and Foundations Division, 1973There are many situations in civil engineering where vertical earth anchors must be used to withstand horizontal loading. A series of tests is described on model anchor plates in sand. The results are presented in the form of dimensionless force coefficients and shape factors relating failure loads to the geometry of the anchor and its depth of ...
W.J. Neely, J.G. Stuart, J. Graham
openaire +1 more source
Journal of the Structural Division, 1966
For a rigid foundation supported by a group of vertical piles of variable stiffness and general layout, simple formulas were derived by matrix algebra which (a) produce the pile forces caused by vertical loads or moments only, without prior computation of a pile gravity center and principal axes with corresponding load transformation (only one ...
openaire +1 more source
For a rigid foundation supported by a group of vertical piles of variable stiffness and general layout, simple formulas were derived by matrix algebra which (a) produce the pile forces caused by vertical loads or moments only, without prior computation of a pile gravity center and principal axes with corresponding load transformation (only one ...
openaire +1 more source
Impact of vertical loading on the implant‐bone interface
Clinical Oral Implants Research, 2012AbstractObjectivesThe main aim of this study was to evaluate the impact of vertical loading occurring during removal of cemented restorations on the implant‐bone interface.MethodsThirty‐six titanium implants (Camlog 4.3 × 9 mm) were placed 1 mm supraosseous in the frontal skull of four minipigs.
Christian, Mehl +7 more
openaire +2 more sources
2019 4th International Conference on Intelligent Transportation Engineering (ICITE), 2019
Vertical alignments of grades and lengths are critical aspects of expressway geometric profile design which evidently influence segment safety performance. On vertical grades, rear end collision of cars to trucks is a frequent form of accidents. To alleviate this highly spotted safety issue and to reveal the relationship between loads, vertical grades,
Zongxin Tang, Jianchuan Cheng
openaire +1 more source
Vertical alignments of grades and lengths are critical aspects of expressway geometric profile design which evidently influence segment safety performance. On vertical grades, rear end collision of cars to trucks is a frequent form of accidents. To alleviate this highly spotted safety issue and to reveal the relationship between loads, vertical grades,
Zongxin Tang, Jianchuan Cheng
openaire +1 more source
Estimation of spinal loading in vertical vibrations by numerical simulation
Clinical Biomechanics, 2003This paper describes the prediction of spinal forces in car occupants during vertical vibrations using a numerical multi-body occupant model.An increasing part of the population is exposed to whole body vibrations in vehicles. In literature, vertical vibrations and low back pain are often related to each other.
Verver, M.M. +4 more
openaire +3 more sources
Vertical Loads on Multistory Buildings
2013The previous chapter dealt with issues related to the lateral loadings on building systems. In that chapter, we described how one can represent the global lateral loading as loads acting on the individual frames contained in the building system. We focus in this chapter on how one treats vertical loads such as gravity loads.
Jerome J. Connor, Susan Faraji
openaire +1 more source
Distribution Simulation of Vertical Load on Runway
2010 Third International Conference on Information and Computing, 2010The vertical load of aircraft is changing due to the lift along runway. Affected by traffic model of highway, load with fixed value is used as a design basis in present design theory of pavement and the effect of lift is generally expressed by lift coefficient.
Cai Liangcai, Wu Aihong, Gu Qiangkang
openaire +1 more source
Vertical Stress Formulas for Triangular Loading
Journal of Geotechnical Engineering, 1984Exact formulas for the calculation of vertical stresses in soil are presented without the use of charts and tables. Formulas are derived using the basic Boussinesq's equation for a point load to calculate the vertical stresses due to a triangular loading on a rectangular area.
Ramon Jarquio, Victor Jarquio
openaire +1 more source