Results 131 to 140 of about 922,036 (272)

Mechanochemical Synthesis and Characterization of Nanostructured ErB4 and NdB4 Rare‐Earth Tetraborides

Advanced Engineering Materials, Volume 27, Issue 6, March 2025.
ErB4 and NdB4 nanostructured powders are produced by mechanochemical synthesis. 5 h mechanical alloying and 4 M HCl acid leaching are used in the production. ErB4 and NdB4 powders exhibit maximum magnetization of 0.4726 emu g−1 accompanied with an antiferromagnetic‐to‐paramagnetic phase transition at about TN = 18 K and 0.132 emu g−1 with a maximum at ...
Burçak Boztemur, Faruk Kaya, Bora Derin, Mustafa Lütfi Öveçoğlu, Ju Li, Duygu Ağaoğulları   +5 more
wiley   +1 more source

Enhancing Corrosion Resistance and Mechanical Strength of 3D‐Printed Iron Polylactic Acid for Marine Applications via Laser Surface Texturing

Advanced Engineering Materials, EarlyView.
Laser surface texturing significantly improves the corrosion resistance and mechanical strength of 3D‐printed iron polylactic acid (Ir‐PLA) for marine applications. Optimal laser parameters reduce corrosion by 80% and enhance tensile strength by 25% and ductility by 15%.
Mohammad Rezayat, Mojtaba Karamimoghadam, Mohammadreza Lalegani Dezaki, Ali Zolfagharian, Giuseppe Casalino, Antonio Mateo, Mahdi Bodaghi   +6 more
wiley   +1 more source

Geometric Optimization and Mechanical Performance Enhancement of Auxetic Structures for High‐Impact Applications Through Fused Deposition Modeling

Advanced Engineering Materials, EarlyView.
This study explores the mechanical performance of three auxetic structures, identifying a re‐entrant‐star hybrid as the most effective for impact absorption. Finite element simulations and experiments demonstrate significant gains in energy absorption and flexural strength after geometric optimization. This study investigates the mechanical performance
Malik Hassan, Manjusri Misra, Alexander Bardelcik, Stefano Gregori, Amar K. Mohanty   +4 more
wiley   +1 more source

Characterization of Defect Distribution in an Additively Manufactured AlSi10Mg as a Function of Processing Parameters and Correlations with Extreme Value Statistics

Advanced Engineering Materials, EarlyView.
Predicting extreme defects in additive manufacturing remains a key challenge limiting its structural reliability. This study proposes a statistical framework that integrates Extreme Value Theory with advanced process indicators to explore defect–process relationships and improve the estimation of critical defect sizes. The approach provides a basis for
Muhammad Muteeb Butt, Varma Kvvssn, Hossein Laieghi, Zia Uddin, Peyman Ansari, E. Kıvanç Sadak, Can Barış Toprak, Hüseyin Kızıl, Enrico Salvati   +8 more
wiley   +1 more source

Laser Metal Deposited Ti4822 Hollow Pipe: Experimental and Computational Modelling Study

Advanced Engineering Materials, EarlyView.
Laser metal deposition (LMD) of a crack‐free built Ti4822 alloys is challenging. This article reports outstanding characteristics of a hollow pipe that is built with LMD technology when a predicted, nontransformation substrate temperature of 800 °C is used.
Sadiq A. Raji, Monnamme Tlotleng, Samuel Skhosane, Lehlogonolo R. Kanyane, Abimbola P. I. Popoola, Sisa L. Pityana   +5 more
wiley   +1 more source

Understanding the Effect of Resistance Temperature Detector Temperature Controllers on Microstructural Alignment in Magnetic Freeze Casting

Advanced Engineering Materials, EarlyView.
The effect of temperature controllers that are commonly used in freeze‐casting is investigated in this work. Temperature controllers are observed to generate a voltage in the slurry. Microstructural alignment and ultimate compressive strength data show this voltage to interfere with the ability to align the microstructure using magnetic fields ...
Maddie A. Schmitz, Steven E. Naleway
wiley   +1 more source

Fabrication‐Directed Entanglement for Designing Chiral and Anisotropic Metamaterial Foams

Advanced Engineering Materials, EarlyView.
This work introduces fabrication‐directed entanglement (FDE), combining viscous thread printing and topology optimization to program entangled foams with spatially patterned stiffness. By tuning coil density, FDE enables anisotropy, programmable Poisson's ratio, and chirality in foams.
Daniel Revier, Brett Emery, Jacob Miske, Jeffrey Lipton   +3 more
wiley   +1 more source

Adjustment of Coatings Morphology and Particle Distribution of Layered Silicates by Freeze‐Drying for Improved Gas Barriers

Advanced Engineering Materials, EarlyView.
Freeze‐drying of layered silicate is the key to get coatings with superior gas barrier. Freeze‐drying of layered silicates modified with dodecylamine (DDA) is a highly effective technique for the preparation of barrier pigments that significantly mitigate the permeation of oxygen, water vapor, and hydrogen through polymer films containing these ...
Joshua Lommes, Moritz Bätcher, Andrea Deißenberger, Volkmar Stenzel, Andreas Hartwig   +4 more
wiley   +1 more source

Exploring Microstructure–Physical Property–Corrosion Response Relationship in Intermetallic Compounds of Al‐Cu Bimetallic Interfaces

Advanced Engineering Materials, EarlyView.
Al‐Cu intermetallic compounds (IMCs) have a significant influence on the properties of Al‐Cu bimetallic interfaces formed in compound casting. This article provides a deeper understanding of microstructure, crystallography, thermal properties, hardness, and corrosion response of Al‐Cu IMCs with the goal of facilitating the optimization of the ...
Alireza Nazarahari, Tatiana Blank, Christian Hinte, Huseyin Can Ozdemir, Khemais Barienti, Christian Klose, Dermican Canadinc, Hans Jürgen Maier   +7 more
wiley   +1 more source

Additive Manufacturing of Gradient Stiffness Honeycombs Using Thermoplastic Polyurethane Composite Material Variations

Advanced Engineering Materials, EarlyView.
By combining porous, solid, and carbon fiber‐reinforced thermoplastic polyurethane within a single 3D printed honeycomb structure, this current work achieved precise control over spatial stiffness while ensuring strong interlayer adhesion. The findings demonstrate enhanced energy absorption and densification strain, outperforming traditional uniform ...
Savvas Koltsakidis, Konstantinos Tsongas, Dimitrios Tzetzis   +2 more
wiley   +1 more source