Results 91 to 100 of about 5,177,798 (117)
Final report : baseline survey for waste-to-energy pilot in Malang Regency
, 2017 ESCAP and its partners undertake solid waste management assessments (baseline surveys) in all cities prior to establishing waste-to-resource initiatives.
UN.ESCAP +3 more
core
Some properties of thin medium density fiberboard panels treated with sunflower waste oil vapor
Materials & Design, 2010 The objective of this study was to investigate the effect of hot waste oil vapor on some of the physical and bending properties of commercially manufactured thin medium density fiberboard (tMDF) panels. The samples were treated with waste oil vapor at a temperature of 220 °C for 10 and 20 min time durations.
Murat Ertaş +2 more
exaly +3 more sources
Some of the next articles are maybe not open access.
Related searches:
Related searches:
Analytical pyrolysis properties of waste medium-density fiberboard and particle board
Journal of Industrial and Engineering Chemistry, 2015Abstract Medium-density fiberboard (MDF) and particle board (PB) showed similar pyrolysis characteristics. Thermogravimetric analysis displayed the main weight loss between 200 and 400 °C, continued up to 600 °C. The activation energy (Ea) values at each conversion were in the range of 166–372 kJ/mol for MDF and 161–325 kJ/mol for PB and indicated ...
Young-Kwon Park +2 more
exaly +2 more sources
Industrial Crops and Products, 2013
Abstract Nitrogen-enriched activated carbons were prepared from waste medium density fiberboard base using K2CO3 as an activating agent for electrochemical capacitors. The effect of different temperatures of carbonization (300, 400, 500, and 600 °C) and the influence of the sequence of activation process (a mass K2CO3/coke ratio of 3, temperature of ...
Xiao-Juan Jin +4 more
exaly +2 more sources
Abstract Nitrogen-enriched activated carbons were prepared from waste medium density fiberboard base using K2CO3 as an activating agent for electrochemical capacitors. The effect of different temperatures of carbonization (300, 400, 500, and 600 °C) and the influence of the sequence of activation process (a mass K2CO3/coke ratio of 3, temperature of ...
Xiao-Juan Jin +4 more
exaly +2 more sources
Pyrolysis of Medium Density Fiberboard (MDF) wastes in a screw reactor
Energy Conversion and Management, 2015Abstract Medium Density Fiberboard (MDF) wastes were undergoes via a thermal treatment through of a pyrolysis process. Pyrolysis was carried out in a pilot scale reactor with screw conveyor at two reaction temperatures (450 and 600 °C) and, for each one, three solid residence times (9, 15 and 34 min) were evaluated.
Daniele Perondi +2 more
exaly +2 more sources
Wood Science and Technology, 2014
Nitrogen-enriched activated carbons were prepared from waste medium density fiberboard waste by using NaOH, K2CO3 and KOH. The content of nitrogen in the activated carbon was 0.92, 0.74 and 1.33 % by analysis. The influence of contact time, pH, Cr(VI) initial concentration and the amount of activated carbon on the Cr(VI) adsorption capacity were ...
Xiao-Juan Jin, Jian-Min Gao
exaly +2 more sources
Nitrogen-enriched activated carbons were prepared from waste medium density fiberboard waste by using NaOH, K2CO3 and KOH. The content of nitrogen in the activated carbon was 0.92, 0.74 and 1.33 % by analysis. The influence of contact time, pH, Cr(VI) initial concentration and the amount of activated carbon on the Cr(VI) adsorption capacity were ...
Xiao-Juan Jin, Jian-Min Gao
exaly +2 more sources
Utilisation possibilities of waste medium-density fiberboard: A material recycling process
Materials Today: Proceedings, 2022P Madhu +2 more
exaly +2 more sources
Waste and Biomass Valorization, 2021
The remaining waste residues of crops such as straws are considered a sustainable material that can be used in the manufacture of medium-density fiberboards (MDF). The hybrid Pennisetum straw has a high cellulose content, which gives it the potential to be used as a sustainable material in the manufacturing of MDF.
Xian Yue +3 more
openaire +1 more source
The remaining waste residues of crops such as straws are considered a sustainable material that can be used in the manufacture of medium-density fiberboards (MDF). The hybrid Pennisetum straw has a high cellulose content, which gives it the potential to be used as a sustainable material in the manufacturing of MDF.
Xian Yue +3 more
openaire +1 more source
Circular development of recycled natural fibers from medium density fiberboard wastes
Journal of Cleaner Production, 2018Abstract This paper addresses a circular economy strategy for the medium density fiberboard (MDF) industry by effectively recycling fibers from MDF residues as raw materials, additionally reducing waste discharge, preserving the ecological environment, saving the wooden resources, and relieving the shortage of raw materials.
Qinzhi Zeng +5 more
openaire +1 more source
Canola straw as a bio-waste resource for medium density fiberboard (MDF) manufacture
Waste Management, 2009Canola straw as an agricultural residue has been investigated for MDF production. The variables were steaming time (2, 5 and 8 min), the resin content (9% and 11%), and press time (4 and 6 min). Common physical and mechanical properties of experimental boards including modulus of rupture (MOR), modulus of elasticity (MOE), internal bond strength (IB ...
openaire +2 more sources