Results 111 to 120 of about 195 (142)
Some of the next articles are maybe not open access.
Rheological Properties of Wet-Mix Shotcrete Mixtures Made with Crushed Aggregate
Journal of Materials in Civil Engineering, 2017AbstractThe recent depletion of high-quality and well-graded natural-aggregate sources is one of the factors compromising the production of good-quality shotcrete.
Pangil Choi +2 more
exaly +2 more sources
Steel‐Fiber‐Reinforced Wet‐Mix Shotcrete: Comparisons with Cast Concrete
Journal of Materials in Civil Engineering, 1994As part of a larger investigation in steel‐fiber‐reinforced wet‐mix shotcrete, companion specimens were cast using the shotcrete mixes for a direct comparison with shotcrete after hardening. Deformed steel fibers with five different geometries were investigated. Mixes were first shot on wooden forms and then cast using external vibration.
Nemkumar Banthia
exaly +2 more sources
Effects of admixtures on the rheological properties of high-performance wet-mix shotcrete mixtures
Construction and Building Materials, 2015Abstract This study investigates the effects of various admixtures on the rheological properties of high-performance wet-mix shotcrete (HPWMS) in an attempt to resolve practical issues faced in conventional wet-mix shotcrete processing. The admixtures used in this study were silica fume, air-entraining agent (AEA), superplasticizer, synthetic fiber ...
Jung Heum Yeon, Kyong Ku Yun
exaly +2 more sources
Mass distribution characteristics of wet-mix shotcrete during spraying process and adhesion process
Construction and Building MaterialsFeng Wei Ning, Wei Sui, Yin Bai, Bo Chen
exaly +2 more sources
Fiber Reinforced Wet-Mix Shotcrete under Impact
Journal of Materials in Civil Engineering, 2000As a result of excavation blasting, traffic, sudden ground movements, rock bursts, and seismic activity, shotcrete is often subjected to impact and other dynamic loads. Limited data exist, however, with regard to the resistance of shotcrete to such dynamic loads.
P. Gupta, N. Banthia, C. Yan
openaire +1 more source
Structures, 2021
Abstract The main focus of this study is to investigate the effects of macro steel (ST), forta-ferro (FF) and polyamide (PA) synthetic fibers on the slump, compressive, splitting tensile, flexural strength, flexural toughness and rebound rate of wet-mix shotcrete.
Akbulut, Zehra Funda +2 more
openaire +2 more sources
Abstract The main focus of this study is to investigate the effects of macro steel (ST), forta-ferro (FF) and polyamide (PA) synthetic fibers on the slump, compressive, splitting tensile, flexural strength, flexural toughness and rebound rate of wet-mix shotcrete.
Akbulut, Zehra Funda +2 more
openaire +2 more sources
Retrofitting of Vulnerable Reinforced Concrete Frames with Wet-Mixed Shotcrete Panels
Advances in Structural Engineering, 2012In this paper, wet-mixed shotcrete panels are proposed instead of reinforced concrete (RC) shear walls for the retrofitting of vulnerable RC frames. The general behavior of the retrofitted frames responding in-plane lateral loading is investigated in detail. The experimental work is composed of retrofitting of undamaged and damaged RC frames.
P. Teymur, S. Pala, E. Yuksel
openaire +1 more source
Impact behaviour of fiber reinforced wet-mix shotcrete
2009The use of shotcrete for ground support in mines and tunnels has increased dramatically within the past ten years. It has long been used in the construction of dams, canals, and reservoirs, in the repair and rehabilitation of marine, highway and railway structures, and in rock stabilization work.
openaire +1 more source
Durability Assessment for Crushed Sand Wet-mix Shotcrete Mixed with Mineral Admixtures
Journal of the Korea Concrete Institute, 2014The purpose of this dissertation was to investigate the effect of mineral admixtures, such as fly ash, blast furnace slag powder, meta kaolin and silica fume, on the basic properties and durability of crushed sand shotcrete, selecting a series of shotcrete mixtures with a variable admixture.
Kyeo-Re Lee +3 more
openaire +1 more source

