Results 81 to 90 of about 97,792 (355)

Investigation of Thermo‐Chemical Processes in Commercial MgO‐C Refractory Bricks With and Without MgO‐C Recyclate at Elevated Temperatures

Advanced Engineering Materials, EarlyView.
This study investigates thermo‐chemical processes during high‐temperature testing of two commercial MgO‐C brick grades, one containing 47.5 wt.% MgO‐C recyclate. Using ETV, DTA/TG‐MS, XRD, and SEM/EDS/EBSD, mechanisms such as carbothermal reduction of magnesia, impurity incorporation into the secondary MgO surface layer, and calcium‐rich phase ...
Alexander Schramm, Jana Hubálková, Christian Schimpf, Thomas Schemmel, Christos G. Aneziris, Anja Weidner, Horst Biermann   +6 more
wiley   +1 more source

Long Term Strength and Durability of Clayey Soil Stabilized With Lime [PDF]

Engineering and Technology Journal, 2011
This study deals with durability characteristics and unconfined compressive strength of clayey soil stabilized with lime. The tests comprises of unconfined compressive strength for samples stabilized with the optimum lime percent (4%), and subjected to ...
Abdulrahman H. Al-Zubaydi, Moafaq A. Al-Atalla, Ibrahaim M. Al-Kiki   +2 more
doaj   +1 more source

Mitigation of GHGs Emission From Soils by a Catalyzed In-Situ Photo-Oxidative Polymerization of Soil Organic Matter [PDF]

, 2010
Agricultural lands under food and bio-energy crops, managed grass and permanent crops including agro-forestry, occupy about 40-50% of the Earth's land surface^1^. In 2005, agriculture accounted for an estimated emission of 5.1 to 6.1 GtCO2-eq/yr (10-
Alessandro Piccolo, Riccardo Spaccini
core   +1 more source

On-sample water content measurement for a complete local monitoring in triaxial testing of unsaturated soils [PDF]

, 2012
To provide a complete local monitoring of the state of an unsaturated soil sample during triaxial testing, a local water content measurement device was adapted to a triaxial device comprising the measurement of local displacements (Hall effect ...
Cui, Yu-Jun, Delage, Pierre, Munoz-Castelblanco, José, Pereira, Jean-Michel   +3 more
core   +6 more sources

Removing Oxide Layers and Retaining Oxide‐Free Steel Surfaces by Polishing in Oxygen‐Free Atmosphere

Advanced Engineering Materials, EarlyView.
In this study, the efficacy of wet mechanical polishing under an oxygen‐free atmosphere for deoxidation and the retention of an oxide‐free steel surface are elucidated using X‐ray photoelectron spectroscopy. The methodology proved successful; however, the results were highly dependent on the preparation of the solvents used to clean the samples after ...
Friedrich Bürger, Lienhard Wegewitz, Wolfgang Maus‐Friedrichs   +2 more
wiley   +1 more source

Powder Optimization Strategies for Binder Jetting Printing of BaTiO3 and Ba0,6Sr0,4TiO3 Ceramics

Advanced Engineering Materials, EarlyView.
Powder optimization is investigated to enable binder jetting of BaTiO3 and Ba0.6Sr0.4TiO3 ferroelectric ceramics. The antagonistic relationship between flowability and binder compatibility is addressed through binder impregnation of granulated powders and fumed silica addition to fine powders.
Fanny Pruvost, Lionel Presmanes, Soléna Colin, Marie Vidal, Sophie Guillemet‐Fritsch   +4 more
wiley   +1 more source

Failure mechanism of canal slopes of expansive soils considering action of wetting-drying cycles

Yantu gongcheng xuebao, 2019
The canal of expansive soils is in the state of wetting-drying cycle because of seasonal water level fluctuations, and its slope instability is easily induced.
CAI Zheng-yin 1, CHEN Hao 1,2, HUANG Ying-hao 1, ZHANG Chen 1
doaj   +1 more source

Numerical Simulations of Gravity-Driven Fingering in Unsaturated Porous Media Using a Non-Equilibrium Model [PDF]

, 2010
This is a computational study of gravity-driven fingering instabilities in unsaturated porous media. The governing equations and corresponding numerical scheme are based on the work of Nieber et al. [Ch. 23 in Soil Water Repellency, eds. C. J.
Barenblatt, Bauters, Belfort, Beliaev, Cardwell, Celia, Chuoke, Cuesta, Cuesta, Cuesta, Cueto-Felgueroso, Cueto-Felgueroso, Cueto-Felgueroso, Das, Dautov, de Rooij, DiCarlo, DiCarlo, DiCarlo, DiCarlo, Diment, Egorov, Eliassi, Eliassi, Eliassi, Glass, Glass, Glass, Gutjahr, Hassanizadeh, Hassanizadeh, Haverkamp, Helmig, Hill, Hornung, John M. Stockie, Juanes, King, Lu, Manthey, Michael Chapwanya, Miller, Mitkov, Nieber, Nieber, Nieber, Nieber, Parlange, Peszyńska, Philip, Pinales, Pop, Pop, Raats, Saffman, Sander, Schroth, Scott, Selker, Selker, Starke, van Dam, van Duijn, van Duijn, van Genuchten, Wang, Wang, Wang, Warren, Warrick, Yao, Zaidel   +71 more
core   +2 more sources

Population of Nonmetallic Inclusions in Liquid High‐Silicon Electrical Steel in Contact With MgO–C Refractories Based on Recyclates and Environmentally Friendly Binders

Advanced Engineering Materials, EarlyView.
The formation of nonmetallic inclusions (NMIs) was investigated in this study, carrying out immersion tests for 30 min at a temperature of 1600°C with liquid high‐silicon electrical steel (Si ≈ 3 mass‐%) and different MgO–C refractories. Conventional MgO–C refractories were considered, as well as MgO–C refractories containing MgO–C recyclate and ...
Lukas Neubert, Matheus Roberto Bellé, Florian Kerber, Dinesh Kumar Gunasekar, Hans‐Jörn Weddige, Christos G. Aneziris, Olena Volkova   +6 more
wiley   +1 more source

Interaction of MgO Recyclate‐Based Cermet Anode With KF‐AlF3‐Al2O3 at 800°C During Laboratory Scale Aluminum Molten Salt Electrolysis

Advanced Engineering Materials, EarlyView.
A carbon‐free, as‐sintered MgO–steel cermet anode, fabricated via cold isostatic pressing using MgO–C refractory recyclate, was evaluated under laboratory‐scale K‐cryolite electrolysis at 800°C. Operation at this reduced temperature, combined with the electrolyte's limited electrical conductivity, led to an increase in cell voltage.
Farhan Hossain, Alexander Adamczyk, Felipe Alejandro Garcia Paz, Serhii Yaroshevskyi, Felix Drechsler, Daniel Vogt, Christos G. Aneziris, Alexandros Charitos   +7 more
wiley   +1 more source