Results 51 to 60 of about 922 (165)

The performance of 3d printed dowel with three different surface designs in furniture joints

Turkish Journal of Forestry
The shear strengths of the joints produced by using Poly Lactic Acid (PLA), PLA+ Thermoplastic Polyurethane (TPU), and resin (Acrylic Photopolymer) with three different surface design of the dowels including, grooved, straight, and cross were ...
Nazmiye Tuğçe Kuvel, Kutay Çava, Mustafa Aslan, Samet Demirel   +3 more
doaj   +1 more source

DEVELOPMENT AND IMPROVEMENT OF BEAM STRUCTURES ON THE BASIS OF COMPOSITE LOGS’ GIRDERS

Вестник СибАДИ, 2018
Introduction. Experience in the design and construction of beam structures of wooden bridges with composite girders indicates the possibility of increasing the bearing capacity and the length of the overlapped spans.Materials and methods.
V. A. Utkin, P. N. Kobzev, E. G. Shatunova   +2 more
doaj   +1 more source

Testing biodegradable interventions to disrupt plant–animal feedbacks and promote seagrass establishment

Restoration Ecology, Volume 34, Issue 1, January 2026.
Biogeochemical and physical feedbacks are well known to prevent ecosystem recovery even after initial disturbance factors are mitigated. However, multi‐trophic interactions that may maintain disturbed areas have received less attention, despite their potential importance in mediating restoration success. In this study, we surveyed stingray feeding pits
Beatriz Marin‐Diaz, Christine Angelini, Charli Pezoldt, Katie Konchar, Andrew H. Altieri   +4 more
wiley   +1 more source

The end distance effect of knock-down furniture fasteners on bending moment resistance of corner joints

Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 2008
The goal of this paper is to investigate the effect of the end distance of cam lock fasteners on the bending moment resistance of knock-down corner joints.
Milan Šimek, Eva Haviarová, Carl Eckelman   +2 more
doaj   +1 more source

Mechanical Evaluation and XRD/TG Investigation on the Properties of Wooden Dowel Welding

BioResources, 2017
Mechanical properties related to wooden dowel welding were studied using five different moisture content (MC) values. Birch wooden dowels and Chinese larch substrates were used in this study. A 2% MC for the wooden dowels and a 12% MC for the substrates resulted in the highest pullout resistance.
Xudong Zhu, Songlin Yi, Ying Gao, Yuting Zhao, Yaqin Qiu   +4 more
openaire   +2 more sources

Methane Transport Pathways and Oxidation in a Minnesota Bog

Journal of Geophysical Research: Biogeosciences, Volume 130, Issue 12, December 2025.
Abstract Despite the widely recognized importance of wetland CH4 emissions as a climate change feedback, simultaneous measurements of CH4 transport pathways and oxidation in a wetland are rare. Thus, these critical components of many CH4 models are poorly parameterized because of the lack of appropriate data.
Scott D. Bridgham, Jeffrey R. White, Rachel M. Wilson, Jason K. Keller, Jeffrey P. Chanton   +4 more
wiley   +1 more source

Assessing the in Planta Efficacy of Oxathiapiprolin as a Potential Treatment for Kauri Dieback Disease

MicrobiologyOpen, Volume 14, Issue 5, October 2025.
We tested the oomycide oxathiapiprolin as a protective and curative agent against kauri dieback disease (caused by Phytophthora agathidicida) in Agathis australis seedlings. Protective application of oxathiapiprolin (10 or 50 mg per seedling) effectively prevented disease, but it did not cure existing infections.
Hannah F. Robinson, Jade T. T. Palmer, Monica L. Gerth   +2 more
wiley   +1 more source

Investigating the Stress Carrying Capacity of Corner Joints In The Furniture Frame Fabricated With Dowel [PDF]

Iranian Journal of Wood and Paper Industries, 2014
The goal of this study was to determine stress carrying capacity of doweled corner joints in framed furniture structures. Joint members were out of European silver Fir (Abies alba) and dowels were made from Beech and Hornbeam woods as variables in this ...
Mosayeb Dalvand, Sadegh Maleki, Ghanbar Ebrahimi, Akbar Rostampour   +3 more
doaj  

RESULTS OF NUMERICAL MODELING OF THE STRESSED-DEFORMED STATE OF THE JOINT CONNECTION OF WOOD CONSTRUCTIONS WITH CFRP DOWEL PINS

International Journal for Computational Civil and Structural Engineering, 2018
A comparative analysis based on a series of numerical simulation experiments in the ANSYS software for determining the bearing capacity and the optimal arrangement of CFRP dowel pins in the joints of wooden structures.
Mikhail A. Vodiannikov
doaj   +1 more source

Modifying Large Molecule Release From Hydrogels Using Microcapillary Channels Patterned With Microfibrous Templates

Polymers for Advanced Technologies, Volume 36, Issue 10, October 2025.
ABSTRACT Tuning the bulk properties of hydrogels is essential to applying them as tools for regenerative medicine. Patterning microscale pores into hydrogels provides an avenue for modifying the mechanical and transport properties of the whole gel while preserving the properties of its polymeric network.
John A. Rector IV, Wesley Thayer, Leon M. Bellan   +2 more
wiley   +1 more source