Results 1 to 10 of about 186 (119)
Power Distribution and Possible Influence on Fuel Failure in WWER-1000 [PDF]
Science and Technology of Nuclear Installations, 2008 The work is focused on the influence of investigation of some core heterogeneities and construction materials on the space power (fission rate) distribution in WWER-1000-type cores, especially from viewpoint of the values and gradient occurrence that ...
Ján Mikuš
doaj +3 more sources
Effective fuel temperature of wwer-1000 [PDF]
MATEC Web of Conferences, 2017 The main temperature characteristics of a pressurized water reactor are distinguished, supporting its safety and reliable operation. The special role of the uranium fuel effective temperature is emphasized and the accuracy of the analytical determination
Kudrov Alexander +2 more
doaj +6 more sources
Determination of irradiation conditions of WWER-1000 reactor internals [PDF]
Ядерна фізика та енергетика, 2006 The calculational procedure for determination of irradiation conditions of WWER-1000 reactor internals is presented. Using developed procedure, irradiation conditions of WWER-1000 reactor internals, first of all, baffle and barrel, are determined for a
S. M. Pugach +3 more
doaj +2 more sources
Analysis of axial offset units with WWER-1000 in the mode of maneuvering [PDF]
Trudy Odesskogo Politehničeskogo Universiteta, 2014 The article examines the impact of xenon transient processes in power programs for regulating WWER-1000 reactor on its stability and reliability. Xenon transient processes in the power maneuvering mode of NPP affect the reactivity change in the active ...
Т.В. Фощ
doaj +6 more sources
WWER-1000 accelerated unit unloading activation transient features [PDF]
Ядерна фізика та енергетика, 2009 For WWER-1000 operation at power level more than 75 % of nominal one (Nnом) in case of failure of safety important equipment, the direct activation of accelerated unit unloading (AUU) signal is initiated.
V. I. Borysenko +2 more
doaj +2 more sources
Evaluation of WWER-1000 vessel materials fracture toughness [PDF]
Ядерна фізика та енергетика, 2007 The lifetime of WWER-1000-type reactor vessels is finally conditioned by the fracture toughness (crack growth resistance) of RPV materials. Up to now in line with the regulations the fracture toughness is characterized by the critical temperature of ...
E. U. Grynik +3 more
doaj +2 more sources
An automated boron management system for WWER-1000 nuclear reactors [PDF]
Trudy Odesskogo Politehničeskogo Universiteta, 2015 The article is devoted to the problem of creating a system of automated control with boron regulation for reactor WWER-1000 series. Using the boron regulation to control WWER-1000 allows to extend its maximum output operation period, ensuring the ...
Taisiya O. Tsiselskaya, Andriy V. Kovtun
doaj +2 more sources
Control rod drive WWER 1000 – tuning of input parameters [PDF]
Applied and Computational Mechanics, 2007 The article picks up on the contributions presented at the conferences Computational Mechanics 2005 and 2006, in which a calculational model of an upgraded control rod linear stepping drive for the reactors WWER 1000 (LKP-M/3) was described and results ...
Markov P., Valtr O.
doaj +1 more source
Electromagnetism Mechanism for Enhancing the Refueling Cycle Length of a WWER-1000
Nuclear Engineering and Technology, 2017 Increasing the operation cycle length can be an important goal in the fuel reload design of a nuclear reactor core. In this research paper, a new optimization approach, electromagnetism mechanism (EM), is applied to the fuel arrangement design of the ...
Navid Poursalehi +2 more
doaj +2 more sources
Modal Analysis of Spent Fuel Cask for WWER-1000 Reactors [PDF]
مجله علوم و فنون هستهای, 2011 The Spent Fuel Assemblies (SFAs) of WWER-1000 reactors are planned to be transported by special containers which are supposed to be designed in a manner to stand against vibrations and impacts in order to protect the spent fuel from any possible damage ...
S.A Azimfar, A. Kazemi
doaj +1 more source