Results 41 to 50 of about 203,029 (268)
The Structural, Electric and Dielectric Properties of Ni0.7Cd0.3NdxFe2-xO4 (0≤x≤0.03) Ferrite Prepared via Oxalate Co-Precipitation Route [PDF]
Iranian Journal of Materials Science and Engineering, 2022 In present work Ni0.7Cd0.3NdxFe2-xO4 ferrite samples (0≤x≤0.03) were prepared by using oxalate co-precipitation technique. The different characterization techniques were achieved using X-ray diffraction (XRD), FT-infrared (FTIR) spectroscopy, scanning ...
Surekha S. Jadhav +3 more
doaj
Advanced Engineering Materials, EarlyView.Powder metal processing provides scalable advantages in nanoporous (np) metal development. Mechanical alloying is used to produce unique precursors for hybrid nanopore formation by oxide reduction and dealloying. As demonstrated in np Ag, this approach improves process efficiency while promoting smaller ligaments and larger pores, both of which are ...
Mark A. Atwater, Oliver A. Fowler
wiley +1 more source
Advanced Engineering Materials, EarlyView.This study explores the lightweight potential of laser additive‐manufactured NiTi triply periodic minimal surface sheet lattices. It systematically investigates the effects of relative density and unit cell size on surface quality, deformation recovery, compression behavior, and energy absorption.
Haoming Mo +3 more
wiley +1 more source
Advanced Engineering Materials, EarlyView.The corrosion performance of AlSi7Mg and AlSi10Mg alloys produced through selective laser melting (SLM) was examined under compressive stress in a chloride environment. Electrochemical analyses, including open‐circuit potential (OCP), potentiodynamic polarization (CPP), and electrochemical impedance spectroscopy (EIS), were complemented by scanning ...
Femi John Akinfolarin +2 more
wiley +1 more source
Advances in Civil and Architectural EngineeringGeopolymers offer a sustainable alternative by reducing environmental impacts while fulfilling construction needs. Their eco-friendly properties and performance contribute to lower CO2 emissions and minimise landfill waste through recycling.
Sajan Sharma, Shailja Bawa
doaj +1 more source
Biocalcarenites as construction materials in Santa Marina de Aguas Santas Church at Cordoba, Spain
Materiales de Construccion, 2009 This study consisted in characterizing the materials used to build Santa Marina de Aguas Santas Church at Cordoba and locating the original quarries.
J. Barrios Neira +4 more
doaj +1 more source
Gazi Üniversitesi Fen Bilimleri Dergisi, 2020 Sample preparation is one of the main steps in metallographic examinations and the sample preparation processes give rise to changes in the determination of volume fraction of any phases can cause failure at the interpretation of a study.
Burak NALÇACI +2 more
doaj +1 more source
Advanced Engineering Materials, EarlyView.This study explored how effective nickel aluminide coatings are obtained in providing oxidation resistance applied to the Inconel 738 alloy, modeling with diffusion models. In the present study, kinetics and thermal behavior of the Inconel 738 alloy were studied by the low‐temperature thermoreactive aluminizing process, which was carried out at 625°C ...
Gozde Celebi Efe +4 more
wiley +1 more source
Evolution of the hydration in cements with additions
Materiales de Construccion, 2002 In this paper, the hydration mechanism of portland cement pastes with limestone, quartz and natural pozzolan (80/20 weight) was analized. The techniques used were nonevaporable water content, pozzolanic activity and X-ray diffraction.
V. L. Bonavetti +2 more
doaj +1 more source
Journal of Natural Fibers, 2022 Appropriate surface modifications are required to enhance the compatibility of natural fibers with polymer matrix to develop eco-friendly composites. One of such novel plant fibers is Bauhinia vahlii (BV) stem fiber.
Umakanta Patel +4 more
doaj +1 more source