Mn+1AXn (MAX) phase materials present an attractive potential for friction reduction and wear resistance applications due to the ternary layered structure.
Yan Shen +4 more
doaj +1 more source
Oil quality in diesel engines with on line oil cleaning using a heated lubricating oil recycler [PDF]
A method of cleaning the oil on line was investigatedusing a bypass fine particulate filter followed by an infra red heater to remove water and light diesel fractions in the oil.
Andrews, Gordon +6 more
core +1 more source
Abstract In this study, the decomposition of a multialkylated cyclopentane (MAC) and a perfluoro‐poly‐ether (PFPE) lubricant was investigated in a ball‐on‐disc sliding test under vacuum and in a rolling contact fatigue (RCF) test on full bearings. In situ mass spectrometry was conducted to study the tribochemical formation of hydrogen in a steel‐on ...
Dominik Kürten +2 more
wiley +1 more source
POSSIBILITY OF APPLICATION FOR ETHERS OF ACONITE ACID AS AW/EP ADDITIVE [PDF]
The possibility of using substances containing only carbon, hydrogen and oxygen as antiwear additives for lubricating oils has been investigated. Studies have been conducted on the example of ethers of aconite acid and hexadecyl alcohol.
I. MUKHORTOV +3 more
doaj +1 more source
Tribology of polypropylene and Li-complex greases with ZDDP and MoDTC additives [PDF]
The influence of thickener and additive interactions on grease lubricating performance is examined. Polypropylene and lithium complex thickened (Li-complex) greases were tested both as neat greases and with a 2 wt% addition of ZDDP and/or MoDTC.
Glavatskih, Sergei +5 more
core +2 more sources
Investigation of the Effect of a Diamine-Based Friction Modifier on Micropitting and the Properties of Tribofilms in Rolling-Sliding Contacts [PDF]
The effect of N-Tallow-1,3-DiaminoPropane (TDP) on friction, rolling wear and micropitting has been investigated with the ultimate objective of developing lubricants with no or minimal environmental impact.
Anne Neville +8 more
core +1 more source
The influence of anti-wear additive ZDDP on doped and undoped diamond-like carbon coatings [PDF]
Diamond-like carbon (DLC) coatings are recognised as a promising way to reduce friction and improve wear performance of automotive engine components. DLC coatings provide new possibilities in the improvement of the tribological performance of automotive ...
Bull +37 more
core +1 more source
An in-situ synchrotron XAS methodology for surface analysis under high temperature, pressure and shear [PDF]
The complex tribochemical nature of lubricated tribological contacts is inaccessible in real time without altering their initial state. To overcome this issue, a new design of a pin-on-disc tribological apparatus was developed and combined with ...
A. Dorgham +7 more
core +2 more sources
Effect of lubricant ageing on lubricants' physical and chemical properties and tribological performance; Part I: effect of lubricant chemistry [PDF]
Purpose Ageing has been known to affect the performance of lubricants. However, there is a lot of debate as to whether ageing is beneficial or detrimental to the wear performance of lubricants. Design/methodology/approach The purpose of this
Cen, H, Morina, A, Neville, A
core +2 more sources
以环氧脂肪酸甲酯为原料,在磷酸催化下与短链脂肪醇开环反应制备一系列的双酯衍生物,作为矿物基基础油的替代品。研究了醇碳链长度对双酯衍生物黏度、酸值、低温流动性、热氧化稳定性等理化性能和极压性能、减摩性能、抗磨性能等摩擦学性能的影响,并探究了双酯衍生物作为基础油对传统润滑添加剂二烷基二硫代磷酸锌(ZDDP)的感受性。结果表明:采用短链脂肪醇对环氧脂肪酸甲酯进行开环改性,可以改善其低温流动性、极压性能和减摩、抗磨性能,而不能改善其热氧化稳定性;制备的双酯衍生物对传统润滑添加剂ZDDP具有良好的感受性。With
卢鹏1,许世海1,王昊康1,向硕1,毕涛2,徐军雄2 LU Peng1,XU Shihai1,WANG Haokang1,XIANG Shuo1,BI Tao2,XU Junxiong2
doaj +1 more source

