Results 31 to 40 of about 968 (215)
Current limiting and negative differential resistance in indium oxide based ceramics
Indium oxide based ceramics with bismuth oxide addition were sintered in air in the temperature range 800-1300 ºC. Current-voltage characteristics of In2O3-Bi2O3 ceramics sintered at different temperatures are weakly nonlinear.
Bondarchuk, AN +19 more
core +1 more source
Electronic properties of SnO2-based ceramics with double function of varistor and humidity sensor
This is the post-print version of the article. The official published version can be obtained from the link below - Copyright @ 2010 AD-Tech.Tin dioxide based varistor ceramics SnO2-Co3O4-Nb2O5-Cr2O3-xCuO (x=0; 0.05; 0.1 and 0.5) were made and their ...
Bulpett, R +9 more
core +1 more source
Microstructural Characterization of ZnO Varistors.
Two kinds of commercial ZnO system varistors were investigated with relevance to their microstructures. Particularly, face-to-face fracture surfaces were characterized in terms of secondary electron image and backscatterd electron image to clarify the existence of precipitates at the grain-to-grain interface.
Takeda, Shunji +2 more
openaire +2 more sources
Abstract Electromagnetic sounding coupled with experimental measurements of electrical conductivity (EC) can provide valuable constraints on the thermochemical state of Earth's lower mantle. Here, we report a new set of experimentally determined EC values of pyrolite, a candidate composition of the lower mantle, between 25 and 80 GPa at room ...
Charlotte Trubowitz +10 more
wiley +1 more source
This work presents the most relevant aspects of the SNO2 based varistors technology and a comparative study of its non linear behavior in relation to ZnO (modified Matsuoka system) varistors.
Longo, E. [UNESP] +4 more
core +1 more source
ZnO varistors are widely used in the field of lightning protection. After being struck by lightning, ZnO varistors absorb heat, which can lead to temperature rise and even damage, posing a serious safety threat to electrical safety.
Li Chunying, Zhang Chunlong, Lv Qing
doaj +1 more source
Ultra‐Rapid Blacklight Sintering for ZnO‐Based Varistors With Optimized Functional Properties
ABSTRACT The increasing demand for energy‐efficient optoelectronic systems has intensified interest in high‐performance ceramic varistors, which are critical components in surge protection applications. In this study, ZnO‐based varistors were fabricated using a novel blacklight sintering (BLS) technique, which employs high‐powered blue light, and were ...
Ahmad Sayyadi‐Shahraki +4 more
wiley +1 more source
Grain Boundary Space Charge Engineering of Solid Oxide Electrolytes: Model Thin Film Study
This study demonstrates unprecedented control of grain boundary electrical properties in solid electrolytes. Selective diffusion of cations through grain boundaries in thin films enables 12 orders of magnitude variation in ionic resistance, proving that systematic chemical modification of grain boundary electrical properties is feasible.
Thomas Defferriere +5 more
wiley +1 more source
The effects of Cu dopant on the microstructure and non-ohmic electrical properties of ZnO varistors
The doping effects of Cu on the microstructure and non-ohmic electrical properties of ZnO varistors were studied. Addition of Cu2O can enhance the ZnO grain growth during sintering. The SEM and EDS results revealed that the added Cu mainly distributed in
Fan, Jiwei +15 more
core +1 more source
This paper investigated the effects of sintering temperature on the microstructure and electrical properties of ZrO2-doped zinc oxide (ZnO) varistor ceramics. The results show that, the additive ZrO2 exists as independent second phase between ZnO grains,
Pengkang Xie, Jianping Hu
doaj +1 more source

