Results 1 to 10 of about 3,242 (217)
Fiber laser-MAG hybrid welding of DP/AISI 316 and TWIP/AISI 316 dissimilar weld [PDF]
Procedia CIRP, 2019 Abstract In this paper, TWinning-Induced Plasticity (TWIP), Dual Phase (DP) and austenitic stainless (AISI 316) steels were joined together by hybrid laser/arc welding with an austenitic steel filler. Microstructural and mechanical characterization of welded joints was carried out by optical microscopy, microhardness, tensile and bend tests. The heat
Giuseppe Casalino +2 more
exaly +5 more sources
Assessment of Mechanical Properties of AISI 4140 and AISI 316 Dissimilar Weldments [PDF]
Procedia Engineering, 2014 AbstractBimetallic joints of low alloy steel and stainless steel are widely used in high temperature corrosive environments. In the present investigation, an attempt has been made to investigate the weldability of AISI 4140 and AISI 316 by Gas Tungsten Arc Welding (GTAW) process with and without filler metal. The filler metal employed for joining these
K Devendranath Ramkumar, N Arivazhagan
exaly +3 more sources
Thermo-Mechanical Simulation of Hybrid Welding of DP/AISI 316 and TWIP/AISI 316 Dissimilar Weld [PDF]
Materials, 2020 In this paper, hybrid laser-MAG (metal active gas) welding of twinning-induced plasticity (TWIP) and dual-phase (DP) steels with austenitic stainless steel (AISI316) was simulated by means of the finite element method. A thermo-mechanical model, which uses a 3D heat sources, was developed using the software Simufact Welding.
Patrizia Perulli +2 more
openaire +3 more sources
Characterization and corrosion behaviours of AISI 316 in hydrochloric environment at various concentrations [PDF]
Zaštita Materijala, 2020 Characterization and corrosion behaviours of austenitic stainless steel (AISI 316) types at various concentrations of hydrochloric acid solutions were investigated in relation to its pitting corrosion resistance.
Sani Adams Mohammed +1 more
doaj +3 more sources
Engineering Science and Technology, an International Journal, 2021 Sliding tribocorrosion behaviours of AISI 316 stainless steel were investigated against alumina ball in natural seawater environment (SWE) under 5 N loads.
Sabri Alkan, Mustafa Sabri Gok
exaly +3 more sources
Boración del acero inoxidable AISI 316 [PDF]
Minería y Geología, 2012 En este trabajo se presentan los resultados obtenidos en lacaracterización de capas boradas en el acero inoxidable AISI 316. Paraello se realizó un borado superficial mediante el método de boraciónpor polvos sólidos.
David Coureaux-Mustelier +3 more
doaj +1 more source
An overwiew on corrosion behavior of steels in factory
Eurasian Journal of Physics and Functional Materials, 2021 In this study, corrosion behaviors of diffuser unit solutionbywhich raw sugar is produced from minced sugar beets in sugar factories on St-37 low alloy steel and AISI 304, 304L, 316 austenitic stainless steel types were examined.
H. .. Demiroren
doaj +1 more source
Elektrik Ark Kaynağı ile Birleştirilmiş Farklı Çeliklerin Mekanik Özellikleri Üzerine Bir Çalışma
Süleyman Demirel Üniversitesi Fen-Edebiyat Fakültesi Fen Dergisi, 2020 İstenen özelliğe sahip malzemeler üretebilmek için farklı malzemeler bir arada kullanılabilir. Bu araştırmanın temel amacı elektrik ark tekniği ile birleştirilen AISI 316 ve AISI 4140 kaynaklarının kaynaklanabilirliğini ve mekanik özelliklerini ...
Cüneyt AYTEKİN +2 more
doaj +1 more source
Effect of Forge Application on Microstructural and Mechanical Properties of AISI 316 Using Direct Drive Friction Welding Process [PDF]
Archives of Metallurgy and Materials, 2022 Present study introduces effect of forge application and elimination on microstructural and mechanical properties of AISI 316 during friction welding. Temperature measurements, microstructure, micro-hardness, tensile test, scanning electron microscopy ...
A. Jabbar Hassan +2 more
doaj +1 more source
Journal of Manufacturing and Materials Processing, 2023 This research investigates the multi-response of both material removal rate (MRR) and surface roughness (Ra) for the wire electrical discharge machining (WEDM) of two stainless steel alloys: AISI 304 and AISI 316.
Mona A. Aboueleaz +4 more
doaj +1 more source