Modelling the Boronizing Kinetics in AISI 316 Stainless Steel
Acta Physica Polonica A, 2012 This work deals with the simulation of the growth kinetics of the (FeB/Fe2B) bilayer and the di usion zone on a substrate of AISI 316 stainless steel exposed to the powder-pack boriding process, in the temperature range of 1123 1273 K and a time duration ranging from 2 to 10 h. The developed di usion model employs a set of mass balance equations at the
Z. Nait Abdellah, M. Keddam, A. Elias
openaire +1 more source
Breakdown and evolution of the protective oxide scales of AISI 304 and AISI 316 stainless steels under high-temperature oxidation [PDF]
, 2011 The failure of the protective oxide scales of AISI 304 and AISI 316 stainless steels has been studied and compared at 1,000°C in synthetic air. First, the isothermal thermogravimetric curves of both stainless steels were plotted to determine the time ...
Saura Barreda, Juan J. +9 more
core +1 more source
Corrosion Resistance Enhancement in Acidic solution for Austenitic Stainless Steel by Gas-Phase Hybrid Deposition Process [PDF]
Engineering and Technology Journal, 2017 In acidic environments the corrosion rate of stainless steels is considered high, this is due to pitting occurrence in concentrated chloride environments.
A.D. Thamir +3 more
doaj +1 more source
Electrochemical Fabrication of a GO-NiO/AISI 316L Electrode and Its Evaluation for Glucose Detection
International Journal of Electrochemical Science, 2021 This paper describes the fabrication of a GO-NiO/AISI 316L electrode and its subsequent evaluation for enhanced glucose detection. The GO-NiO/AISI 316 L electrode was fabricated in situ by the electrodeposition of a GO-NiO nanocomposite generated by ...
Elsa Nadia Aguilera González +4 more
doaj +1 more source
Effect of Geobacter sulfurreducens on the microbial corrosion of mild steel, ferritic and austenitic stainless steels [PDF]
, 2009 The influence of Geobacter sulfurreducens was tested on the anaerobic corrosion of four different steels: mild steel 1145, ferritic steel 403 and austenitic steels 304L and 316L.
Basséguy, Régine +3 more
core +1 more source
Chemical Engineering Transactions, 2017 In this research, the influences of temperature and exposure time on the corrosion rate by sulfidation of an AISI-316 stainless steel were evaluated.
J. Sanabria Cala +3 more
doaj +1 more source
Zaštita Materijala, 2020 Characterization and corrosion behaviours of austenitic stainless steel (AISI 316) types at various concentrations of hydrochloric acid solutions were investigated in relation to its pitting corrosion resistance.
Sani Adams Mohammed +1 more
doaj +1 more source
Microbial-Induced Corrosion of 3D-Printed Stainless Steels: A Surface Science Investigation
Materials Proceedings, 2021 Stainless steel is a material manufactured for its high corrosive resistance and is the first choice of material in a range of applications. Microbial-induced corrosion can cause significant damage to metals and is responsible for approximately 20% of ...
Brianna L. Young +2 more
doaj +1 more source
Numerical and experimental analysis of anisotropic damage growth and martensitic phase change due to plastic strain at ambient temperature [PDF]
مهندسی مکانیک شریفThis study investigates the anisotropic damage growth and martensitic phase transformation in AISI-316 austenitic stainless steel at room temperature. Initially, tensile and torsion tests were performed on samples at various displacements.
R. Barkhordari +2 more
doaj +1 more source
Characterization of the expanded austenite developed on AISI 316 LM steel by plasma nitriding [PDF]
Journal of Mining and Metallurgy. Section B: Metallurgy, 2017 AISI 316 LM samples were plasma nitrided at a temperature of 380°C for different times between 0.5 and 8 h in a 85%N2- 15%H2 gas mixture. Different experimental techniques such as: optical microscopy (OM), X- ray diffraction (XRD ) and glow ...
Keddam M. +3 more
doaj +1 more source