Results 161 to 170 of about 30,108 (299)
steel research international, EarlyView.The effect of chemical inhomogeneity on the microstructure and properties of nanobainitic steel is investigated. A two‐stage isothermal heat treatment that produced a more uniform microstructure is designed. The first‐stage temperature is higher than the MS of depleted bands; conversely, the second‐stage temperature is lower than the first‐stage ...
Bogdan Garbarz +5 more
wiley +1 more source
steel research international, EarlyView.A double intercritical annealing strategy is proposed to tailor the multiphase microstructure and mechanical response of a medium‐Mn steel. The treatment produces an ultrafine mixture of ferrite, martensite and multiple austenite populations with graded thermal and mechanical stability, formed through austenite reversion and controlled retransformation.
Mattia Franceschi +3 more
wiley +1 more source
Modeling of the Passive State of Construction Materials in Small Modular Reactor Primary Chemistry-Effect of Dissolved Zn. [PDF]
Materials (Basel)Bojinov M, Betova I, Karastoyanov V.
europepmc +1 more source
steel research international, EarlyView.Hydrochar‐mill‐scale briquettes with varying C/O molar ratios (0.07–0.90) have been tested at 1650 °C to evaluate their slag foaming performance for electric arc furnace application. All seven briquette recipes developed succeed in promoting slag foaming.
Yu‐Chiao Lu +3 more
wiley +1 more source
Effect of Cold Rolling on the Mechanical Properties and Corrosion Resistance in Hydrofluoric Acid Solution of Inconel 600 Alloy. [PDF]
Materials (Basel)Dong X +6 more
europepmc +1 more source
Roughness effects on fretting fatigue [PDF]
, 2017 Abdel Wahab, Magd, Yue, Tongyan
core +1 more source
Structural Concrete, EarlyView.Abstract In practice, reinforced concrete (RC) wall‐like columns often have openings to facilitate building services, which creates stress concentrations around the opening, resulting in the weakening of their load‐carrying capacity. This study proposes innovative strengthening methods using near‐surface mounted (NSM) incorporating steel materials to ...
Ahmed Hamoda +4 more
wiley +1 more source
Evaluation of Lower Limit of Fatigue Strength in High Cycle and Very High Cycle Fatigue Regime. [PDF]
Materials (Basel)Wang S, Zhang Y, Gao Y, Sun C.
europepmc +1 more source
Flexural performance of concrete‐filled steel tubular beams with wood chip aggregate
Structural Concrete, EarlyView.Abstract This study investigates the flexural performance of concrete‐filled steel tubular (CFST) beams with partial replacement of aggregates by wood chips (0%–25%) through experimental and numerical analysis. This study is novel in that it experimentally and numerically investigates the flexural behavior of CFST beams with partial replacement of ...
Mizan Ahmed +6 more
wiley +1 more source
The microstructure and precipitation effects in Inconel alloy 690. [PDF]
Failure of Alloy 600 steam generator tubing in Pressurised Water Reactors (PWRs) has prompted the investigation of alloy 690 as an alternative material. Six commercially produced tubes and ten experimentally produced alloys have been examined with varying amounts of carbon, aluminium and titanium.
openaire