Results 41 to 50 of about 277 (176)
CrystalsLaser welding–brazing experiments with 6061 aluminum alloy and Q235 steel were conducted using AlSi12 and ZnAl22 as filler metals. The macroscopic morphologies and microstructures of welding–brazing joints were analyzed by optical microscopy (OM) and ...
Wenxuan Guo +4 more
doaj +1 more source
Bending Strength of EN AC-44200 – Al2O3 Composites at Elevated Temperatures
Archives of Foundry Engineering, 2017 The paper presents results of bend tests at elevated temperatures of aluminium alloy EN AC-44200 (AlSi12) based composite materials reinforced with aluminium oxide particles. The examined materials were manufactured by squeeze casting.
Kurzawa A., Kaczmar J. W.
doaj +1 more source
Defectoscopy of direct laser sintered metals by low transmission ultrasonic frequencies [PDF]
Science of Sintering, 2012 This paper focuses on the improvement of ultrasonic defectoscopy used for machine elements produced by direct laser metal sintering. The direct laser metal sintering process introduces the mixed metal powder and performs its subsequent laser ...
Ebersold Zoran +4 more
doaj +1 more source
X‐Ray Tomography Analysis of Damage Mechanisms in Metal Matrix Syntactic Foams During Compression
Advanced Engineering Materials, Volume 28, Issue 3, 4 February 2026.In situ synchrotron X‐ray tomography is used to investigate the internal damage mechanisms of AlSi12 metal matrix syntactic foam with ceramic hollow spheres during compressive loading. It is concluded that a homogeneous distribution of the second‐phase filler material results in a sequential collapse in a localized region; this leads to controlled and ...
Indrajeet Tambe +8 more
wiley +1 more source
Studies on Tribological and Mechanical Behavior of AlSi10Mg Processed by Selective Laser Melting
Engineering Reports, Volume 8, Issue 2, February 2026.To advance the industrial use of additive manufactured (AM) components, evaluating wear behavior is essential for reliability, safety, and innovative design. This study investigates AlSi 10 Mg alloy produced via Selective Laser Melting (SLM) in as‐built, T6, and stress‐relief (SR) conditions.
Reema Sultana +7 more
wiley +1 more source
Investment casting of periodic aluminum cellular structures using slurry-cast table salt moulds
Materials & Design, 2022 A process is presented for the production of periodic cellular structures based on investment casting of Al-12 wt%Si alloy within a mould that is made of table salt (NaCl) packed around a sacrificial PLA polymer template.
Florian Gallien +2 more
doaj +1 more source
Energy Storage, Volume 7, Issue 8, December 2025.ABSTRACT Liquid metal packed‐bed thermal energy storage (TES) can improve industrial waste heat recovery due to its wide operating temperature range and high thermal conductivity. However, reducing costs, especially for storage media, is essential for broader adoption.
Margaux Zehnder +3 more
wiley +1 more source
Evaluation of the Technological Properties of the Al-Si Eutectic Alloy Based on Density Index Test [PDF]
Archives of Foundry EngineeringAluminium-silicon alloys are widely used in industrial practice due to their many advantages, including light weight and relatively high strength. The consumption of these light engineering materials is constantly increasing, especially in the automotive
M. Starczewski, A.J. Dolata, M. Dyzia
doaj +1 more source
Corrosion in laser powder bed fusion AlSi10Mg alloy
Engineering Reports, Volume 6, Issue 10, October 2024.Examples of corrosion effects and mechanisms for AlSi10Mg processed using laser powder bed fusion additive manufacturing. Abstract Aluminum alloy AlSi10Mg is a widely used engineering material that offers a very high strength‐to‐weight ratio and easy processing.
Hossein Laieghi +6 more
wiley +1 more source
Metals, 2023 AlSi12(Fe), AlSi10Mg(Fe), AlSi10MnMg, and AlMg4Fe2 die-casting alloys were produced by high-pressure die casting (HPDC) and vacuum-assisted high-pressure die casting (VADC) under a vacuum level of 200 mbar.
Gonçalo Soares +6 more
doaj +1 more source