Komposit Beton-profil Lip Channel Untuk Mencegah Tekuk Lateral-torsional [PDF]
, 2012 Lip channels profile usually failed before reaching its maximum loaddue to torsional. To avoid this problem, usually lateral support isprovided to the profile. One of the solution is by filling the profile withconcrete material (composite).
Loe, R. R. (Ridwan) +2 more
core +1 more source
Impact of air entrainment on the microstructure and mechanical performance of high performance mortar [PDF]
, 2014 At the Magnel Laboratory for Concrete Research an intensive vacuum mixer which can regulate the air pressure is available. As such the amount of entrapped air in cementitious materials can be varied.
Boel, Veerle +2 more
core +2 more sources
Significant Influence on Residual Bending Strength by Cracks Generation During Grinding of Ceramics
Chinese Journal of Mechanical EngineeringAny product must undergo precise manufacturing before use. The damage incurred during the manufacturing process can significantly impact the residual strength of the product post-manufacturing.
Jinshuo Zhang +5 more
doaj +1 more source
The Effects of Bamboo Spoon Raw Material Flexural Properties on Machining Performance
Journal of Natural FibersThe study investigated the influence of flexural properties of bamboo spoon raw materials of different ages, parts, and moisture contents on the processing of bamboo spoon.
Jun Lei +6 more
doaj +1 more source
Bending strength studies on hot-pressed silicon carbide [PDF]
The 4-point bending strength of 4 grades of hot-pressed SiC was determined at different temperatures. With a transgranular mode of fracture the values for bending strength are retained up to high temperatures.
Kriegesmann, J.
core +1 more source
Deformability of a textile reinforcement modified with nanofibres [PDF]
, 2010 Deformability of a textile fabric is studied experimentally using a) friction test, b) out-of-plane compression, and c) bending. These tests reveal that a grafting of the fabric with carbon nano-fibres can significantly deteriorate its deformability ...
Akkerman, R. +5 more
core +1 more source
Prevention of Springback of High Strength Steel Sheet in L-Bending Process [PDF]
, 2016 Nowadays steel sheets are widely used in the industry due to the advantages of this materials in offering high strength with light weight. However due to the high tensile strength the manufacturing process need an improvement to overcome the defects ...
Mohd Syafiq, Yusoff, Zamzuri, Hamedon
core
Bending and fatigue strength of mortise and tenon furniture joints made from oil palm lumber. [PDF]
, 2010 The bending and fatigue strengths of rectangular mortise and tenon furniture joints made from oil palm lumber and solid Rubberwood were compared. The results showed that the ultimate bending moment of the oil palm lumber joints were half of the strength ...
Ioras, Florin +1 more
core +2 more sources
Ionizing radiation impact on the mechanical properties of a wood-plastic composite: a review [PDF]
, 2020 This paper reviews the effect of radiation on the mechanical properties of WPC. WPC can be defined as mixture of wood in a polymer matrix. Composite that used in this research mainly consists of 40% polyethylene (PE), 50 % wood fiber and the rest is ...
Harun, Siti Nur Idayu +1 more
core
Strength Tests of Thin-walled Duralumin Cylinders of Elliptic Section [PDF]
This report is the fifth of a series presenting the results of strength tests of thin-walled cylinders and truncated cones of circular and elliptic section; it includes the results obtained from torsion tests on 30 cylinders, pure bending tests on 30 ...
Burke, Walter F, Lundquist, Eugene E
core +1 more source