Results 51 to 60 of about 1,422 (207)
To address the technical bottlenecks associated with the poor overall performance of emulsified asphalt mixtures incorporating high‐proportion (84 wt%) recycled asphalt pavement (RAP) aggregates, this study proposes a synergistic modification strategy using styrene‐butadiene rubber (SBR) and nano‐silica (SiO2), coupled with the regulation of cement and
Zhilin Sun +7 more
wiley +1 more source
Mechanical Properties of Cold Mix Asphalt (CMA) Mixed with Recycled Asphalt Pavement
From the perspective of sustainability and environmental concerns, the use of cold-mix asphalt (CMA) and recycled asphalt pavement (RAP) is more advantageous than the use of hot mix asphalt (HMA) and warm mix asphalt (WMA).
Amin Chegenizadeh +5 more
doaj +1 more source
Study on the Action Mechanism of Bitumen Emulsion and Aggregate
The paper describes the action mechanism of bitumen emulsion and aggregate, the charge test of aggregate and reaction heat test between aggregate and bitumen emulsion are used to analyze adsorption mechanism.
Hong Ying Liu, Yi Qin Jia
core +1 more source
Assessment of Two Laboratory Design Methods for CIR Mixtures With Bitumen Emulsion Based on Static and Gyratory Compaction [PDF]
[Abstract] To expand the body of knowledge regarding cold in-place recycled mixtures, this study presents two different laboratory design methods. The main differences between the methods are the compaction procedures (static and gyratory) and the ...
Orosa, Pablo +2 more
core +1 more source
The study of the properties, chemical composition, and degradation patterns of rubber materials used in vehicle tires remains a complex and interdisciplinary task. Rubber for tires—more precisely, complex mixtures of elastomers containing fillers, plasticizers, binders, and other additives—is a condensed chemically active material, the composition and ...
Roman Tangalychev +3 more
wiley +1 more source
Enhancing In Situ Burning With Ferrocene for Improved Combustion and Reduced Smoke Production
ABSTRACT In situ burning (ISB) is an efficient response strategy for oil spills; however, incomplete combustion and excessive smoke production hinder its wider application. In this study, the effectiveness of using ferrocene as additives to improve the thermal behaviors and kinetics of combustion of different crude oils (Hibernia, Hebron, Dilbit and ...
Joshua O. Olowoyo +6 more
wiley +1 more source
Road surface quality as the basis of safe operation of transport systems
The safe functioning of the transport system mainly depends on the quality of road surfaces. Therefore, improvement of the physical and mechanical characteristics of roads will ensure the effective protection of health and safety of people engaged in ...
Grekhov Pavel +3 more
doaj +1 more source
Compressed Earth Blocks (CEB) with bitumen emulsion
Walls made of soil present serious failures due to their exposure to rain and groundwater. In addition, due to their hygroscopic characteristics, compressed earth blocks (CEBs) present low resistance to water ...
Hernán Darío Cañola +3 more
doaj +1 more source
Emulsions of water in bitumen, even in solvent-diluted bitumen, are notorious for their stability. Such stability affects the removal of water in the Froth Treatment Process prior to upgrading of bitumen extracted from mining operations.
Edgar, Acosta +3 more
core +1 more source
Can artificial intelligence fully replace humans in polymer discovery? How can we effectively harness AI's potential while preserving human creativity, ethics, and expertise? Does AI introduce new biases and interpretability challenges into SDL? This perspective aims to answer these important questions and advocates for symbiotic human‐AI intelligence ...
Bahar Dadfar +2 more
wiley +1 more source

