Results 1 to 10 of about 3,875 (198)
Anionic Bitumen Emulsions for Waterproofing [PDF]
E3S Web of Conferences, 2021 Bitumen emulsions (BE) are widely used in road construction, for building and structure waterproofing. Storage stability is one of the main BE requirements. They should only break on contact with the surface.
Antonova Ilvira, Ayupov Damir
doaj +2 more sources
Mechanism Influencing the Drying Behavior of Bitumen Emulsion. [PDF]
Materials (Basel), 2021 The drying process of bitumen emulsion largely dominates the strength development of emulsion-based mixtures for pavement structure, thus it can be used to judge the quality of bitumen emulsion. However, the drying behaviour of bitumen emulsions was seldom considered.
Li C, Ouyang J, Dou F, Shi J.
europepmc +4 more sources
Influence of Solvents on The separation of Water From The bitumen Emulsions Using Alginite.
Zanco Journal of Pure and Applied Sciences, 2021 The impact of various diluents on the removing of water from bitumen emulsions for the distillation feed (bitumen) using alginite as a demulsifier was investigated. Alginite as a natural rock is able to remove water from the bitumen emulsion.
Sangar S.Ahmed
doaj +3 more sources
Stability of Bituminous Emulsion Induced by Waste Based Bio-Surfactant
Applied Sciences, 2021 In the asphalt industry, bituminous emulsions are widely used in road pavement operations and in building/construction processes such as cold mix asphalt and waterproofing processes, respectively.
Michele Porto +4 more
doaj +1 more source
Egyptian Journal of Petroleum, 2021 The peculiarities of the composition of natural bitumen from Russian Federation deposits give rise to further processing and transportation problems due to necessity of construction of processing units close to their production areas.
Ismagil Khusnutdinov +2 more
doaj +1 more source
Quick-traffic slurry surfacing mix with orthophosphoric acid
Production Engineering Archives, 2021 Bitumen emulsions for slurry surfacing mix technology using oxidized bitumen and hydrochloric and orthophosphoric acids on laboratory DenimoTech bitumen-emulsion plant are made in the work.
Sidun Iurii +3 more
doaj +1 more source
Probing the Interfacial Forces and Surface Interaction Mechanisms in Petroleum Production Processes
Engineering, 2022 Despite the advances that have been made in renewable energy over the past decade, crude oil or petroleum remains one of the most important energy resources to the world.
Diling Yang +9 more
doaj +1 more source
DEVELOPMENT OF A PREMIUM COLD MIX ASPHALT
Mağallaẗ Al-kūfaẗ Al-handasiyyaẗ, 2023 Cold mix asphalt produced using conventional emulsion and limestone filler has three main disadvantages, namely low early strength due to high amount of water within the mix, long curing time ranging from 2-24 months and high air voids content.
Manar Hamzah Herez +3 more
doaj +1 more source
Mechanical Properties of Cold Mix Asphalt (CMA) Mixed with Recycled Asphalt Pavement
Infrastructures, 2022 From the perspective of sustainability and environmental concerns, the use of cold-mix asphalt (CMA) and recycled asphalt pavement (RAP) is more advantageous than the use of hot mix asphalt (HMA) and warm mix asphalt (WMA).
Amin Chegenizadeh +5 more
doaj +1 more source
Synergetic improvement of technological characteristics of highway road surfaces by bitumen microdispersed emulsions [PDF]
Нанотехнологии в строительствеIntroduction. The use of bitumen microdispersed emulsion as a resource-saving method for road surface construction is a popular trend in the development of innovative nanostructures.
Anton O. Glazachev +4 more
doaj +1 more source