Results 71 to 80 of about 167 (167)

Non‐Destructive and Mechanical Characterization of the Bond Quality of Co‐Extruded Titanium‐Aluminum Profiles

open access: yesAdvanced Engineering Materials, EarlyView.
This study investigates the bond quality of co‐extruded aluminum–titanium hybrid profiles, focusing on the lateral angular co‐extrusion (LACE) process. It examines how heat treatments (HT) affect intermetallic phase formation, bond strength, and material properties.
Norman Mohnfeld   +9 more
wiley   +1 more source

Comparative Wear and Friction Analysis of Sliding Surface Materials for Hydrostatic Bearing under Oil Supply Failure Conditions

open access: yesAdvanced Engineering Materials, EarlyView.
Hydrostatic bearings excel in high‐precision applications, but their performance hinges on a continuous external supply. This study evaluates various material combinations for sliding surfaces to mitigate damage during supply failures or misalignment and to discover the most effective materials identified for enhancing the reliability and efficiency of
Michal Michalec   +6 more
wiley   +1 more source

Mechanisms of De‐icing by Surface Rayleigh and Plate Lamb Acoustic Waves

open access: yesAdvanced Engineering Materials, EarlyView.
Ice accretion impacts daily life, renewable energy generation, maintenance, and security in industries and aeronautics. Acoustic waves (AW) are a promising method for ice removal, although de‐icing mechanisms require further investigation to optimize energy efficiency.
Shilpi Pandey   +15 more
wiley   +1 more source

Development of a Novel Processing Route for Dispersoid/Precipitation‐Strengthened High Conductive Copper Alloys by Using Metalized Nanoceramics in Additive Manufacturing

open access: yesAdvanced Engineering Materials, EarlyView.
This study explores a process chain to produce dispersoid‐strengthened CuCr1Zr for applications requiring high strength and conductivity. Using gas‐atomized powder and copper‐plated alumina nanoparticles, additive manufacturing is performed via powder bed based additive manufacturing with green and red lasers, followed by heat treatment.
Heinrich von Lintel   +7 more
wiley   +1 more source

Trans‐Conductive Melt Pool Scaling and its Implications for Parameter Transfer in Laser Powder Bed Fusion for Metals with High Thermal Diffusivity

open access: yesAdvanced Engineering Materials, EarlyView.
Developing process parameters for the laser‐based Powder Bed Fusion of metals can be a tedious task. Based on melt pool depth, the process parameters are transferable to different laser scan speeds. For this, understanding the melt pool scaling behavior is essential, particularly for materials with high thermal diffusivity, as a change in scaling ...
Markus Döring   +2 more
wiley   +1 more source

Analysis of Temperature and Stress Distribution on the Bond Properties of Hybrid Tailored Formed Components

open access: yesAdvanced Engineering Materials, EarlyView.
Hybrid materials enable high‐performance components but are challenging to process. This study explores an inductive heating concept with spray cooling for steel–aluminum specimens in a two‐step process including friction welding and cup backward extrusion.
Armin Piwek   +7 more
wiley   +1 more source

A Perspective on Powder Metallurgy and Additive Manufacturing of High‐Nitrogen Alloyed Stainless Steels

open access: yesAdvanced Engineering Materials, EarlyView.
This perspective article explores an innovative powder metallurgical approach to producing high‐nitrogen steels by utilizing a mixture of stainless steel and Si3N4. This mixture undergoes hot isostatic pressing followed by direct quenching. The article also examines adapting this method to laser powder bed fusion (PBF‐LB/M) to overcome nitrogen ...
Louis Becker   +5 more
wiley   +1 more source

Influence of Form and Structural Features of Open‐Cell Hybrid Foam on the Remanent Magnetic Scanning

open access: yesAdvanced Engineering Materials, EarlyView.
Simulations using an equivalent model are performed to improve the understanding of remanent magnetic scanning of hybrid foam samples for coating thickness estimation. The model allows to study the influence of isolated geometrical features such as layer thickness, boundary effects, as well as effects due to the statistical nature of the foams, which ...
Bashar Ibrahim   +4 more
wiley   +1 more source

Advances in Hybrid Icing and Frosting Protection Strategies for Optics, Lens, and Photonics in Cold Environments Using Thin‐Film Acoustic Waves

open access: yesAdvanced Engineering Materials, EarlyView.
This article provides a comprehensive overview of fundamentals and recent advances of transparent thin‐film surface acoustic wave technologies on glass substrates for monitoring and prevention/elimination of fog, ice, and frost. Fogging, icing, or frosting on optical lenses, optics/photonics, windshields, vehicle/airplane windows, and solar panel ...
Hui Ling Ong   +11 more
wiley   +1 more source

Solution of Boundary Layer and Thermal Boundary Layer Equation

open access: yesAsian Research Journal of Mathematics, 2018
Farhana Mamtaz   +2 more
openaire   +2 more sources

Home - About - Disclaimer - Privacy