Results 141 to 150 of about 992 (172)
Some of the next articles are maybe not open access.
Laser Surface Modification of Borochromizing C45 Steel
Archives of Metallurgy and Materials, 2012Laser Surface Modification of Borochromizing C45 SteelIn this study the test results for borochromized C45 steel after laser surface modification were presented. Influence of laser heat treatment on the microstructure and microhardness of surface layer was investigated.
A. Bartkowska +3 more
openaire +1 more source
Journal of Alloys and Compounds, 2017
Abstract Good mechanical and metallurgical properties of powder metallurgy (P/M) materials made them to have limitless applications. In order to minimize corrosion rate during pickling or acid cleaning process corrosion inhibitors are used. In this research work, an attempt is made to investigate the influence of some organic inhibitors with various ...
E. Naveen +3 more
openaire +1 more source
Abstract Good mechanical and metallurgical properties of powder metallurgy (P/M) materials made them to have limitless applications. In order to minimize corrosion rate during pickling or acid cleaning process corrosion inhibitors are used. In this research work, an attempt is made to investigate the influence of some organic inhibitors with various ...
E. Naveen +3 more
openaire +1 more source
SAE 1045, SAE 1045H, SAE 1046, CEN C45, ISO C45 STEEL DATA SURVEY
Alloy Digest, 2022Abstract 1045, 1045H, 1046, C45, C45E, and C45R are wrought medium-carbon non-alloy steels that are used in the normalized, cold worked, or quenched and tempered condition. 1045, 1045H, 1046, C45E, and C45R may also be flame or induction hardened.
openaire +1 more source
Texture Analysis and Corrosion Testing of Aluminized Carbon Steel C45
Materials Science and Engineering, 2020The texture of hot-dip aluminized carbon steel C45 has been studied. Hot-dip aluminized (HDA) samples were prepared by laboratory experiments. The structure and crystal orientation of the topcoat layer of an aluminized specimen was analyzed through X-ray diffraction.
Hawkar J. Muhammed +4 more
openaire +1 more source
Energy Fatigue Characteristic of C45 Steel Subjected to Cyclic Bending
Key Engineering Materials, 2014The paper contains the results of fatigue tests under cyclic bending of C45 steel with amplitude of energy parameter control. The tests were performed on the smooth specimens. Based on these tests, energy fatigue characteristic of the tested material was elaborated.
Ewa Marcisz +3 more
openaire +1 more source
Boriding of carbon steel C45 with subsequent difusion annealing
2021Boriding is a type of thermal diffusion process in which the chemical element boron diffuses in the surface layers of steel at elevated temperatures (800 to 1000°C) which, together with iron (Fe), forms iron borides that have a very high hardness (1500-2100 HV) and wear resistance, to abrasion and erosion.
Matijević, Božidar, Žanetić, Filip
openaire
Characterization of surface layer obtained by boronizing of C45 steel
2019This study deals with characterization of surface layers obtained by pack boronizing C45 steel at 870 °C for 6 h. Analysis is performed to assess average thickness, change of volume share of boride phase and the surface microhardness in the layer cross section.
Nikšić, David +2 more
openaire +2 more sources
The effect of sol–gel boehmite coatings on the corrosion and decarburization of C45 steel
Journal of Sol-Gel Science and Technology, 2018Sol–gel boehmite coatings were produced on the polished surfaces of hypo-eutectoid C45carbon steel by dip coating. After the deposition the coatings were heat treated by drying at RT, 150 and 200 °C. It was found that for crack-free coatings, the drying temperature needs to be ≥150 °C.
Aleš Nagode +7 more
openaire +1 more source
Research on morphology of boride layers obtained on C45 steel
2016This study focuses on morphology of borides formed on C45 steel. Pack boronizing is carried out at a temperature range of 870 – 970 °C in durations of 4 to 8 h. Through use of linear method, average thicknesses of boride layers as well as volume share of boride phase concerning cross section of the layer are determined.
Kladarić, Ivica +2 more
openaire +1 more source
Chip formation analysis during dry turning of C45 steel
STUDIES IN ENGINEERING AND EXACT SCIENCESMachining is a material removal process that creates surfaces through chip formation using a cutting tool. The morphology of the chips and the mechanisms governing their formation directly affect the quality of machined parts. This experimental study examines chip formation mechanisms in the dry turning of C45 steel under various cutting conditions ...
Billel Hamadi +5 more
openaire +1 more source