Results 31 to 40 of about 1,001,504 (355)
Vanadium microalloyed steel for thin slab casting and direct rolling [PDF]
, 2005 Vanadium microalloyed steels with high yield strength (»600 MPa), good toughness and ductility have been successfully produced in commercial thin slab casting plants employing direct rolling after casting.
Baker, T.N., Li, Y., Mitchell, P.S.
core +2 more sources
Application of Stereolithography Based 3D Printing Technology in Investment Casting
Micromachines, 2020 Advanced methods for manufacturing high quality parts should be used to ensure the production of competitive products for the world market. Investment casting (IC) is a process where a wax pattern is used as a sacrificial pattern to manufacture high ...
Muslim Mukhtarkhanov +2 more
semanticscholar +1 more source
Scientific Reports, 2021 Stir casting is a common metallurgical route in the casting of aluminum composites. Series of work done in this aspect considered the development of the composites with fixed stir casting parameters without applying an optimization approach.
A. Adediran +4 more
semanticscholar +1 more source
Hands-off and hands-on casting consistency of amputee below knee sockets using magnetic resonance imaging [PDF]
, 2013 Residual limb shape capturing (Casting) consistency has a great influence on the quality of socket fit. Magnetic Resonance Imaging was used to establish a reliable reference grid for inter cast and intra cast shape and volume consistency of two common ...
Buis, Adrianus +3 more
core +1 more source
Optimization of Heavy Reduction Process on Continuous-Casting Bloom
Metals, 2022 Heavy reduction (HR) is an effective technique to control V segregation in continuous casting bloom, but the effect of segregation improvement is limited by the parameters such as reduction position and reduction amounts.
Bao Yang +5 more
doaj +1 more source
Effects of Alloying Elements on Solidification Structures and Macrosegregation in Slabs
Metals, 2022 A Cellular Automaton-Finite Element (CAFE) model and a secondary dendrite arm spacing (SDAS) model are established to study the evolutionary behavior of the macrostructure and the secondary dendrites on a 295 × 2270 mm2 slab cross-section of experimental
Pan Zhang +3 more
doaj +1 more source
Thermal analysis of 99.4% pure aluminium granules during investment casting by in-situ melting technique [PDF]
, 2020 Investment casting is a precision casting used for producing complex or near-net shape products such as industrial parts, aerospace, automotive and defence components (Adrian, Andreas, Carol, & Vasile, 2013; Vaezi, Safaeian, & Chua, 2011; Yadav ...
core
Structural analysis of sheet nickel welded joints
Metalurgija, 2021 The paper presents an analysis of structure nickel sheet welded joints made by applying Gas Tungsten Arc Welding (GTAW) method. Based on results of metallographic examination, HV5 hardness measurements, Energy dispersive spectroscopy (EDS) and X-ray ...
M. Radoń, Z. A. Opiekun, A. Dec
doaj
Investigation on the Duration of Action of Mg3N2 as a Grain Refiner for AZ80 Alloy
MetalsIn magnesium alloys with aluminum as an alloying component, zirconium loses its grain refinement effect as a grain refiner. Instead of zirconium, Mg3N2 can be used, and promising results have already been obtained.
Thomas Hösele +2 more
doaj +1 more source
Metals, 2017 Boron (B) separation from photovoltaic silicon (Si) remains a research challenge in the recycling field. In this study, a novel B-removal process was developed using thermal plasma treatment coupled with steam and hydrogen gases.
Su-Hyun Baek +5 more
doaj +1 more source