Results 61 to 70 of about 53,723 (256)

Numerical Simulation of Combustion Process of Fuel Gas Mixtures at Refining Industry

Chemical Engineering Transactions, 2015
At oil refinery is important evaluate efficiency of combustion process because variability of combustible gas composition, depending of characteristics and conditions at industry.
V. Kafarov, M. Toledo, L. Merino
doaj   +1 more source

Additively Manufactured Porous Ceramics as Tunable Dielectrics for Passive Temperature Sensing

Advanced Materials Technologies, EarlyView.
Porous ceramic lattices, 3D‐printed from a multicomponent oxide ink, are integrated with LC resonators for passive wireless temperature sensing. By tuning porosity, the dielectric properties and RF response are engineered to produce distinct resonant frequency shifts with temperature. The results establish a structure‐driven approach to customizing the
Sogol Heidarishahrivar, Aminul Islam, Chang Woo Gal, Insup Kim, Yeong‐Jin Choi, Woo Soo Kim   +5 more
wiley   +1 more source

Record Performance in Vertically Stacked, Solution‐Processed ZTO Schottky Diodes

Advanced Materials Technologies, EarlyView.
Schottky diodes based on solution processed sustainable zinc—tin–oxide thin films present an eco‐friendly and versatile alternative to conventional CMOS based technologies. Beyond state‐of‐the‐art performance for vertically stacked solution‐based oxide diodes was achieved, including rectification ratios exceeding nine orders of magnitude, and intrinsic
Carlos Silva, Asal Kiazadeh, Raquel Azevedo Martins, António Dias, Jorge Martins, Luís Mendes, João Vaz, Rodrigo Martins, Elvira Fortunato, Emanuel Carlos, Jonas Deuermeier   +10 more
wiley   +1 more source

High‐Power Rapid Laser‐Induced Synthesis of Multi‐functional Cobalt Metal‐Organic Framework With an Unprecedented Synthesis Efficiency

Advanced Materials Technologies, EarlyView.
Laser‐assisted synthesis enables rapid (within 1 h) and high‐yield (≥90%) production of Co‐MOFs with mesoporous structures, tunable magnetic and optical properties, and efficient adsorption of N2, CH4, and CO2 for low‐energy gas separation. DFT calculations elucidate the electronic structure and adsorption behavior.
Saliha Mutlu, Bülend Ortaç, Ali Karatutlu, Taylan Gorkan, Engin Durgun, Dilek Soyler, Saniye Soylemez, Jelena Lillepäg, Volkan Filiz, Nergis Arsu, Sevil Savaskan Yilmaz   +10 more
wiley   +1 more source

An Approach to the Toxicology of Combustion Products of Materials [PDF]

Environmental Health Perspectives, 1976
Physiological and behavioral (conditioned avoidance) responses of male Long-Evans rats were determined during exposure to combustion products produced on thermal degradation of three different polymeric materials. Arterial blood samples were obtained for determination of carboxyhemoglobin (COHb) and acid/base status.
openaire   +2 more sources

Three‐Dimensional Printed Microarchitected Hierarchically Porous Biodegradable PLA/S/CNT Nanocomposite Electrodes for High‐Performance Lithium–Sulfur Batteries

Advanced Materials Technologies, EarlyView.
Hierarchically microarchitected PLA/S/CNT cathodes are fabricated via scalable fused filament 3D printing as high‐sulfur‐loading hosts for rechargeable lithium–sulfur batteries. The assembled Li–S cells with sulfur loadings up to 17 mg cm−2 deliver an areal capacity of 9.2 mAh cm−2 and retain 96% of their discharge capacity after 100 charge–discharge ...
Vinay Gupta, Pawan Verma, Fahad Alam, Krishnaiahnahundi Manjunathaswamy Mohan, Shanumgam Kumar   +4 more
wiley   +1 more source

The Resource-Saving Technology of Aluminum Nitride Obtaining During Combustion of Aluminum Nanopowder in Air

MATEC Web of Conferences, 2016
The resource-saving technology of aluminum nitride obtaining during the combustion of aluminum nanopowder in air has been analyzed in the article. The investigation of the crystal phases of aluminum nanopowder combustion products obtained under the ...
Ilyin Alexander, Mostovshchikov Andrei, Root Liudmila   +2 more
doaj   +1 more source

Stretchable and Strain‐Tolerant Gold‐Coated Fibrous Biosensor for Superoxide Anion Monitoring

Advanced Materials Technologies, EarlyView.
A breathable, stretchable gold nanomesh–TPU fiber platform is developed via controlled electroless deposition, enabling uniform through‐thickness conductivity while preserving porosity. Functionalized with superoxide dismutase, the system achieves selective, real‐time electrochemical detection of superoxide with high sensitivity, mechanical durability,
Jafar M. Batayneh, Ahyeon Koh
wiley   +1 more source

Soft Actuators Integrated with Control and Power Units: Approaching Wireless Autonomous Soft Robots

Advanced Robotics Research, EarlyView.
Soft robots exhibit significant development potential in various applications. However, there are still key technical challenges regarding material improvement, structure design and components integration. This review focuses on the development and challenge of soft actuators, power components, and control components in untethered intelligent soft ...
Renwu Shi, Feifei Pan, Xiaobin Ji
wiley   +1 more source

Multimodal Locomotion in Insect‐Inspired Microrobots: A Review of Strategies for Aerial, Surface, Aquatic, and Interfacial Motion

Advanced Robotics Research, EarlyView.
This review identifies key design considerations for insect‐inspired microrobots capable of multimodal locomotion. To draw inspiration, biological and robotic strategies for moving in air, on water surfaces, and underwater are examined, along with approaches for crossing the air–water interface.
Mija Jovchevska, Kaushik Jayaram, Nicole Xu   +2 more
wiley   +1 more source