Results 11 to 20 of about 105,174 (312)
Restrained composite columns [PDF]
This Thesis describes the development of an analysis for\ud inelastic columns, with cross-sections composed of one or more\ud materials, loaded with axial load and biaxial moments. The\ud column can have both rotational and directional restraints at\ud its ends.
May, Ian Melville
openaire +1 more source
Axial Behavior of Reinforced UHPC-NSC Composite Column under Compression. [PDF]
Materials (Basel), 2020 This paper proposes a novel reinforced ultra-high-performance concrete (UHPC)-normal strength concrete (NSC) composite column. The main feature of the reinforced UHPC-NSC composite column is the use of an exterior UHPC cover, which is helpful for ...
Li F, Hexiao Y, Gao H, Deng K, Jiang Y.
europepmc +2 more sources
Behaviour of pultruded beam-to-column joints using steel web cleats [PDF]
, 2013 Response of pultruded Fibre Reinforced Polymer (FRP) beam-to-column joints with steel bolted web cleats is studied through physical testing. Two joint configurations are considered with either three or two bolts per cleat leg, as per drawings in a ...
Qureshi, Jawed, Mottram, J. Toby
core +1 more source
Experimental and Numerical Study of FRP Encased Composite Concrete Columns [PDF]
Journal of Structural and Construction Engineering, 2017 A new type of composite column is presented and assessed through experimental testing and numerical modeling. The objective of this research is to investigate design options for a composite column without the use of ferrous materials.
Mohsen Ishaghian, Abolghassem Keramati
doaj +1 more source
Revista IBRACON de Estruturas e Materiais, 2021 The increase in temperature reduces the strength of steel and concrete, in such a way that it is essential to verify concrete-filled steel tube columns in fire situations.
Fábio Masini Rodrigues +2 more
doaj +1 more source
Vibration and buckling of thin-walled composite I-beams with arbitrary lay-ups under axial loads and end moments [PDF]
, 2013 A finite element model with seven degrees of freedom per node is developed to study vibration and buckling of thin-walled composite I-beams with arbitrary lay-ups under constant axial loads and equal end moments.
Lee, Jaehong, Vo, Thuc
core +1 more source
Flutter prediction, suppression and control in aircraft composite wings as a design prerequisite: a survey [PDF]
, 2007 Emergence of flutter compromises not only the long-term durability of the wing structure, but also the operational safety, flight performance and energy efficiency of the aircraft. Effectual means of flutter prevention are, therefore, mandatory in the
Njuguna, James A. K.
core +1 more source
INVESTIGATION THE BEHAVIOR AND COMPARISON OF RELIABLE CODES ON CONCRETE-STEEL COMPOSITE COLUMNS [PDF]
مجله مدل سازی در مهندسی, 2010 Even though composite columns in buildings and other structures have been used widely more than 50 years and also this procedure is increasing worldwide, likewise very common in practice to either neglect the synergetic contribution of either the steel ...
مسعود Ahmadi +2 more
doaj +1 more source
Journal of Asian Architecture and Building Engineering, 2019 The purpose of this study is to investigate the applicability of the high-ductile fibre cementitious composite to develop seismically improved reinforced concrete columns.
Chang-Geun Cho +3 more
doaj +1 more source
Post-peak Behaviour of Composite Column Using a Ductile Lightweight Aggregate Concrete
International Journal of Concrete Structures and Materials, 2021 Oil palm shell (OPS) concrete filled steel tube (CFT) columns are acknowledged to be a new type of sustainable composite column. In this type of column, the conventional coarse aggregate was partially replaced with OPS lightweight aggregate to provide a ...
Mohammad Reza Hamidian, Payam Shafigh
doaj +1 more source