Results 21 to 30 of about 45,994 (268)

Corrosion Behavior of 110SS Tubing Steel in Highly Acidic Gas Reservoir Environment [PDF]

Cailiao Baohu
110SS steel is widely used in gas reservoir tubing materials in acidic environments owing to its excellent corrosion resistance and strength.In order to deeply understand its corrosion behavior in high acid gas reservoir environment， the 110 SS tubing ...
CHEN Zhiyu, HUANG Bensheng, TANG Jingli, ZUO Hanyang
doaj   +1 more source

Corrosion rate prediction and influencing factors evaluation of low-alloy steels in marine atmosphere using machine learning approach

Science and Technology of Advanced Materials, 2020
The empirical modeling methods are widely used in corrosion behavior analysis. But due to the limited regression ability of conventional algorithms, modeling objects are often limited to individual factors and specific environments. This study proposed a
Luchun Yan, Yupeng Diao, Zhaoyang Lang, Kewei Gao   +3 more
doaj   +1 more source

Study on Corrosion Behavior of Pressure Vessel Steel in Simulated Industrial Wharf Atmospheric Environment [PDF]

Cailiao Baohu
For studying the corrosion behavior of pressure vessel steel in simulated industrial marine atmospheric environment，the weight loss analysis，EDS，XRD and electrochemical methods were used to study the corrosion behavior of pressure vessel steel Q235 and ...
GAN Bang, MA Kaijun, CAO Gongwang, WANG Zhenyao
doaj   +1 more source

Interfacial microstructures and corrosion behavior of tungsten heavy alloy/superalloy dissimilar joints: design, regulation and mechanism

Journal of Materials Research and Technology, 2023
The interfacial microstructures and corrosion behavior of tungsten heavy alloy/superalloy dissimilar joints brazed with various Cu–Ti based multicomponent amorphous alloys were investigated by time-varying chemical bath immersion tests and ...
Yuxin Xu, Xiaoming Qiu, Suyu Wang, Chuantong Chen, Fei Xing, Katsuaki Suganuma   +5 more
doaj   +1 more source

Corrosion behavior in heat pipe [PDF]

Advances in Mechanical Engineering, 2016
The aim of this study was to perform life testing and determine the effect of working fluid on the corrosion of a heat pipe with a sintered wick. The heat pipe was made from a copper tube. The inner heat pipe was filled with 99.97% pure copper powder as a dendritic for the sintering process.
A. Rodbumrung, S. Rittidech, Bopit Bubphachot   +2 more
openaire   +2 more sources

Corrosion Behavior of Aluminum Finstock Alloys

Materials Science Forum, 2002
A number of wrought AlFeSi and AlFeMnSi alloys are used for fin applications, which require an adequate corrosion resistance. The corrosion resistance of different finstock materials was compared on the basis of electrochemical passivation, pitting and salt spray experiments.
Birol, FS, Birol, Y, Slamova, M
openaire   +2 more sources

The Corrosion Behavior of Aluminium

CORROSION ENGINEERING DIGEST, 1955
The practical corrosion behavior of aluminum is reviewed for the non-specialist. Included is a discussion of the following topics: the relative nature of corrosion resistance, resistance criteria, factors influencing corrosion rates, common corrosion problems, how to choose an alloy; and galvanic, deposition, crevice and pitting corrosion.
openaire   +2 more sources

Effect of Ca Addition on Corrosion Behavior of Wrought AM60 Magnesium Alloy in Alkaline Solutions

Metals, 2021
Magnesium (Mg) alloys possess the lowest density among structural materials, and their application in the automotive and aircraft industries might enhance fuel efficiency.
Polina Metalnikov, Guy Ben-Hamu, Kwang Seon Shin, Amir Eliezer   +3 more
doaj   +1 more source

Dynamic corrosion behavior of superhydrophobic surfaces

RSC Advances, 2018
For superhydrophobic surfaces immersed in water, a thin layer of air could be entrapped in the solid/liquid interface.
C. Q. Li, M. Y. Zhu, J. F. Ou, Y. L. Lu, F. J. Wang, W. Li   +5 more
openaire   +3 more sources

Effect of Rolling-Induced Microstructural Evolution and Post-Heat Treatment on the Corrosion Mechanisms of Al–Li Alloy 8090-T3 in Simulated Seawater

Corrosion and Materials Degradation
Aluminum–lithium (Al–Li) alloys are widely used in aerospace applications because of their high strength-to-weight ratio and reduced density. However, their corrosion behavior can be significantly affected by thermomechanical processing and exposure to ...
Maheshwara Reddy Jedla, Raghu Vamshi Krishna Belaganti Venkataramulu, Vishwanatha A. Devaranavadagi, Bijayani Panda, Vikram Raja Jothi, Kaustav Barat, Meenu Srivastava, Venkateswarlu Karodi, Santhosh Nagaraja, Sarvana Bavan Dhanaraj, Srinath Mandya Sridharmurthy, Praveena Bindiganavile Anand   +11 more
doaj   +1 more source