Results 21 to 30 of about 1,605 (264)
To improve the fault-tolerant operation capability of bidirectional voltage source converter (BVSC), an improved model predictive current control (IMPCC) for fault-tolerant BVSC, is proposed with balanced DC-link capacitor voltage under unbalanced grid ...
Shiyang Hu +3 more
doaj +1 more source
A simple DC-Link Voltage Balancing Strategy for NPC Three-level Inverters
Three-level neutral point clamped PWM inverters overcome some limitations of two-level inverters in medium voltage applications, leading to lower device ratings and greater efficiency. However, they are burdened by an intrinsic drawback of the neutral point clamped structure, which causes, under some operating conditions, a voltage imbalance of the DC ...
Foti S. +5 more
openaire +4 more sources
Improved voltage balancing scheme for the MLI based DSTATCOM with Sliding Mode Controller
In this article is used to demonstrate of sliding mode controller (SMC) for a multilevel inverter based distributed static compensator (DSTATCOM)for compensation of current harmonics related power quality issues and dc side capacitor voltage balancing of
Kalagotla Chenchireddy, V Jegathesan
doaj +1 more source
The dc-link voltage balance and reactive power equilibrium of the cascaded H-bridge rectifier (CHBR) are the prerequisites for the safe and stable operation of the system.
Chengwei Luo +5 more
doaj +1 more source
Cascaded H-bridge inverter (CHBI) with supercapacitors (SCs) and dc-dc stage shows significant promise for medium to high voltage energy storage applications.
Ye Zhang +4 more
doaj +1 more source
This article describes the use of a sliding mode controller (SMC) in conjunction with an integral (PI) controller for a MLI based DSTATCOM to balance dc side voltage, control a cascaded H-bridge inverter, and compensate for power quality issues related ...
Kalagotla Chenchireddy +3 more
doaj +1 more source
Power Quality Enhancement Using Power Balance Theory Based DSTATCOM
The DSTATCOM (Distributed Static Compensator) is used for current harmonic mitigation, Power Factor Correction (PFC), reactive power compensation, load balancing and neutral current compensation in the Power Distribution System (PDS).
Jampana Bangarraju +2 more
doaj +1 more source
Modular multilevel converters (MMCs) have been conceived as an alternative in front-end converter applications to enhance the converter system’s reliability, minimize total harmonic distortion, and improve power quality.
Muhammad Ali +4 more
doaj +1 more source
Interlinking converter topology on bipolar hybrid microgrid is gaining increasing attention during last years. The heart of bipolar hybrid microgrid structure is the interlinking converter that plays the primary role in this structure. This interlinking converter has decisive tasks in the microgrid control system and controlling the dc-bus is one of ...
Parviz Najafi +2 more
openaire +2 more sources
The Neutral Point Clamped (NPC) Multi-Level Inverters (MLI) have been ruling the power electronics industries for the past two decades. The Multi-Carrier Pulse Width Modulation (MCPWM) is common PWM techniques which are widely used in NPC-MLI ...
Vinoth Jayakumar +2 more
doaj +1 more source

