Results 171 to 180 of about 7,988 (222)
Some of the next articles are maybe not open access.

A DEHUMIDIFYING HEAT PUMP FOR GREENHOUSES

Acta Horticulturae, 2012
In heated greenhouses, attempts have been made to produce potted plants while reducing the amount of energy used. In fact, improvements in greenhouse structure and equipment (double walls, etc.) have led to better insulation and tightness. However, this tightness induces microclimatic changes, especially on night time humidity levels.
Migeon, Christophe   +4 more
openaire   +3 more sources

Continuous-flow thermoacoustic dehumidifier

The Journal of the Acoustical Society of America, 1998
For applications in gas cooling a thermoacoustic refrigerator may be simplified by using the gas stream itself as the acoustic medium and eliminating the cold heat exchanger by directing the input gas stream through the stack (R. S. Reid et al., ‘‘Cyclic Thermodynamics with Open Flow,’’ Phys. Rev. Lett. to appear May 25, 1998).
Robert A. Hiller, G. W. Swift
openaire   +1 more source

Microcomputer Controlled Desiccant Dehumidifier

Transactions of the ASAE, 1987
ABSTRACT Aprototype desiccant dehumidifier was built utilizing a horizontal, rotating drum containing solid desiccant. Outlet relative humidity was controlled by a microcomputer responding to various dehumidifier settings and environmental conditions. The system was tested using constant temperature and humidity inlet air.
null Gerald H. Brusewitz   +1 more
openaire   +1 more source

Thermoelectric Dehumidifier for Sensor Cleaning

2021
In this study, a dry and oil-free air system is developed using easily accessible commercial off-the-shelf components, streamlining the manufacturing process. The significance of this system lies in its ability to prevent contaminants in the air from leaving volatile residues that could potentially harm circuits and disrupt sensor accuracy.
Chunduru, Amareswara Prasad   +2 more
openaire   +1 more source

Estimation of dehumidifying performance of solid polymer electrolytic dehumidifier for practical application

Journal of Applied Electrochemistry, 2010
A two-layer model for a solid polymer electrolytic (SPE) dehumidifier is applied to a system in which the chamber to be dehumidified has some leakage area. By introducing this area, the attainable humidity in the chamber, which is the steady-state humidity to be attained after a long-time dehumidification, can be defined.
Shuichi Sakuma   +2 more
openaire   +1 more source

Dehumidifiers and air drying

2000
In the unit dehumidifier process, all or part of the condenser heat is used to re-heat the air leaving the evaporator. Since the moisture in the air has given up its latent heat in condensing, this heat is reclaimed and put back into the outlet air. The efficiency of a unit dehumidifier can be improved by a heat exchanger that pre-cools the incoming ...
A.R. Trott, T. Welch
openaire   +1 more source

Performance Optimization of Rotary Dehumidifiers

Journal of Solar Energy Engineering, 1995
A rotary dehumidifier consists of a rotating porous matrix made of a desiccant with mechanically supporting materials. The dehumidification performance of a rotary dehumidifier wheel depends on its rotational speed, the sorption properties of the desiccant, the heat and mass transfer characteristics of the matrix, and the size of the dehumidifier.
W. Zheng, W. M. Worek, D. Novosel
openaire   +1 more source

Rotating ring desiccant dehumidifier

Journal of Agricultural Engineering Research, 1985
Abstract Confinement animal housing on cold winter nights can consume large amounts of energy if sufficient airflow is used to control humidity. Reducing the airflow reduces energy consumption but causes excessive moisture to accumulate in the building.
openaire   +1 more source

Gas-powered liquid desiccant dehumidifier

Applied Energy, 1993
Abstract A novel concept for the operation of a liquid desiccant domestic-dehumidifier has been proposed: the resulting developed system dehumidifies air by passing it directly over a liquid desiccant. The system is novel in two respects: first, a bubble pump is used to both reconcentrate the desiccant as well as pump it around the system; secondly ...
J. Rix   +3 more
openaire   +1 more source

Corrosion Monitoring in Dehumidified Storage

CORROSION 2010, 2010
Abstract Dehumidified storage areas are designed to eliminate moisture and thereby corrosion damage. The goal of a dehumidified storage system is to keep the relative humidity (RH) below a certain level (75%) whereby the adverse effects of humidity (rust, condensation, mold and mildew) are greatly reduced or eliminated.
Elizabeth Trillo, Leonardo Caseres
openaire   +1 more source

Home - About - Disclaimer - Privacy