Results 41 to 50 of about 1,356 (186)

Characteristics of flow field in 100 t dephosphorization ladle furnace with top lance

open access: yes工程科学学报, 2016
Characteristics of flow field and stirring effects of top lance with various tilt angles(Tilt angles were 39°,41°,43°,45° and 47°,respectively) on the molten bath were studied using water experiment and Fluent software.
LIU Fu-hai   +3 more
doaj   +1 more source

Test of High Silicon and High Phosphorus Hot Metal Smelted by Retaining Slag and Double Slag Method at 100 t BOF

open access: yesTeshugang, 2020
In view of the high silicon and phosphorus content of hot metal in a steel works, a converter slag-retaining double-slag smelting process is used to obtain a stable dephosphorization rate of hot metal.
高琦   +5 more
doaj  

Study on Dephosphorization Technologies in Converter with Semi-Steel

open access: yes, 2011
Because of disadvantages of converter steelmaking with semi-steel in Panzhihua Steel, such as slow-footed slag forming, low rate of dephosphorization, high rate of rephosphorization after converter smelting, studies on increasing dephosphorization rate ...
Hong Pan   +3 more
core   +1 more source

DEPHOSPHORIZATION KINETICS FOR REACTION OF BLOATED METAL DROPLETS WITH OXIDIZING SLAG [PDF]

open access: yes, 2017
Dephosphorization is one of the most important refining reactions in Steelmaking in the Basic Oxygen Furace (BOF). Dephosphorization can only occur by reaction between the metal and the slag and is linked in a rather complex way to the decarburization of
Gu, Kezhuan
core   +1 more source

Dephosphorization behavior of reduced iron and the properties of high-P-containing slag

open access: yesHigh Temperature Materials and Processes, 2021
Reduced iron (1.74% P) is produced from oolitic hematite ore by coal-based reduction and magnetic separation. To realize the comprehensive utilization of Fe and P, the dephosphorization behavior of the reduced iron is investigated in the presence of CaO ...
Liu Liwei   +3 more
doaj   +1 more source

A Review of Multi-phase Slag Refining for Dephosphorization in the Steelmaking Process

open access: yesFrontiers in Materials, 2020
Dephosphorization has always been a challenging task in the steelmaking process. In the traditional studies, CaO-based steelmaking slag was usually treated as a homogeneous liquid phase to analyze the dephosphorization equilibrium between molten slag and
Wenhui Lin   +5 more
doaj   +1 more source

Preparation of Dephosphorized Casein by an Enzymic Method [PDF]

open access: yesNature, 1954
Plimmer anci Bayliss1 showed as early as in 1906 that the phosphorus of casein could be completely removed as inorganic phosphate by the action of 1 per cent sodium hydroxide at 37° C. in 24 hr. Acidification of the digest after the completion of dephosphorylation precipitated a substance resembling casein. Rimington2 analysed the dephosphorized casein
T. A. SUNDARARAJAN, P. S. SARMA
openaire   +1 more source

Wastewater dephosphorization using crude clays [PDF]

open access: yesInternational Journal of Environmental Science & Technology, 2007
The present work aims to establish the possibility of using local clays to treat wastewater. Thus, three clay samples extracted from two localities in the south of Cote d’Ivoire have been studied in their crude state. The qualitative physicochemical study that consisted in measurement of pH variation and argillaceous particles zeta potential showed ...
Dable, P. J. M. R.   +3 more
openaire   +1 more source

Dependence of Temperature and Slag Composition on Dephosphorization at the First Deslagging in BOF Steelmaking Process

open access: yesHigh Temperature Materials and Processes, 2016
Effects of temperature and slag composition on dephosphorization in a 120 ton top-bottom combined blown converter steelmaking process by double slag method were studied.
Zhou Chao-gang   +6 more
doaj   +1 more source

Parameters affecting dephosphorization of stainless steel

open access: yes, 2015
A literary study has been made to find parameters affecting dephosphorization of stainless steel. Ways to lower phosphorus content without major loss of chromium in order to decrease the production costs of Sandvik AB’s stainless steel.
Andersson, Axel, Wendel, Erik
core   +2 more sources

Home - About - Disclaimer - Privacy