Results 21 to 30 of about 654 (182)

Predicting of Withdrawal Strength With Dowel Joint in Medium Density Fiber (MDF (By mathematic model [PDF]

تحقیقات علوم چوب و کاغذ ایران, 2009
Although doweled joints are vastly used in furniture frame, these are little. Information about its withdrawal strength. The intent of this study is both to obtain initial and primary information concerning the withdrawal strength of dowel pin and, as ...
Mohssen Bahmani, Ghanbar Ebrahimi, Lyla Fathi   +2 more
doaj   +1 more source

Effects of dowel bars misalignment in jointed plain concrete pavements – A numerical analysis considering thermal differentials and bonded slab-base interface

Revista IBRACON de Estruturas e Materiais, 2021
Joints in concrete pavements are built to allow slab volumetric variations avoiding random cracks. Moreover, as they are discontinuities, the use of dowel bars prevents loss of load transfer across joints.
Eric Ribeiro da Silva, José Tadeu Balbo, Andréia Posser Cargnin   +2 more
doaj   +1 more source

Shear Force Capacities of H-Type Furniture Joints Constructed of Various Heat-Treated Wood Species

Drvna Industrija, 2023
The aim of this study was to investigate the effect of wood species, heat treatment, adhesive type and joint technique on shear force capacity of H-type furniture joints.
Mehmet Acar, Engin Balikci, Tolga Kuskun, Ali Kasal, Yusuf Ziya Erdil   +4 more
doaj   +1 more source

Effect of dowel wood species on dowel tensile strength in wooden length joints bonded with different adhesives

Turkish Journal of Forestry, 2019
In this study, dowel tensile strength values of wooden length joints prepared using dowels obtained from ash (Fraxinus excelsior Lipsky), chestnut (Castanea sativa Mill.) and oak (Quercus petraea Lieble) were investigated.
Abdurrahman KARAMAN, Mehmet Nuri YILDIRIM, Esra USLU   +2 more
doaj   +1 more source

Study on the tensile strength of ready-to-assemble and fixed corner joints on medium density fiberboard [PDF]

Iranian Journal of Wood and Paper Industries, 2012
In this research measurement and comparison of tensile strength of disassemble and fixed joints made with members out of MDF were investigated. Experimental joints were made with connectors, such as hardware pieces, elite, dowel, screws and biscuits ...
Mohamad Ghofrani, Habib Nouri, Hossein Hosseinkhani   +2 more
doaj  

Research on the Optimum Embedment Depth of the Dowel Pins into the Particleboard Joints [PDF]

Pro Ligno, 2014
In this paper the authors intend to present the results of the experimental research on the dowel joints applied for 18mm particleboard panels, in order to determine the optimal embedment depth of the dowels, depending on the mechanical resistance of
Adriana FOTIN, Luminiţa-Maria BRENCI
doaj  

Effect of the dowel length, dowel diameter, and adhesive consumption on bending moment capacity of heat-treated wood dowel joints

BioResources, 2019
This study applied response surface methodology for modeling and optimizing heat-treated wood dowel joints, the most used joint in furniture construction. The factors examined were dowel length, dowel diameter, and adhesive consumption. The bending moment capacity of the joints loaded in compression or tension were the responses.
Sergiu Georgescu, Anca Maria Varodi, Sergiu Răcășan, Bogdan Bedelean   +3 more
openaire   +1 more source

Effect of selected factors on stiffness of dowel joints

BioResources, 2018
Furniture must be designed to suit the intended use. Producers need to guarantee its quality and stiffness. During external loading, there are internal forces that can be transmitted and may result in a failure. This article examines the dowel joint, which is one of the most popular furniture joints.
Vladimír Záborský, Adam Sikora, Milan Gaff, Václava Kašičková, Vlastimil Borůvka   +4 more
openaire   +1 more source

Seismic Performance and Vibration‐Based Damage Identification of Two‐Storey Balloon‐Framed CLT Shear Walls

Earthquake Engineering &Structural Dynamics, EarlyView.
ABSTRACT While cross‐laminated timber (CLT) is increasingly utilized in lateral force‐resisting systems in mass timber construction, research has predominantly focused on platform‐type construction. Balloon‐type CLT shear wall systems offer distinct structural advantages, notably the elimination of cumulative perpendicular‐to‐grain compression and a ...
Samira Mohammadyzadeh, Houman Ganjali, Jianhui Zhou, Thomas Tannert   +3 more
wiley   +1 more source

STRUCTURAL BEHAVIOR OF TIMBER-STEEL-JOINTS WITH EITHER DOWEL-TYPE FASTENERS OR CONTINUOUS JOINTS

World Conference on Timber Engineering (WCTE 2023), 2023
For the development of a new hybrid construction method combining the materials steel and timber for linear load-carrying elements subjected to bending loads, different joining methods were investigated. The joining methods were 1) dowel-type fasteners, partly in combination with higher friction in the shear plane and 2) continuous joints, mainly by ...
Aurand, Simon, Boretzki, Jakob, Haase, Peter, Ummenhofer, Thomas, Dietsch, Philipp   +4 more
openaire   +2 more sources