Results 21 to 30 of about 3,481,013 (134)
Resilient modulus prediction of RAP using the Contact Dynamics Method
Transportation Geotechnics, 2020 Abstract The Optimal Recycling of Reclaimed Asphalts in low-traffic Pavements (ORRAP) project concerns a cold recycling of 100% Reclaimed Asphalt Pavement (RAP) without binder addition, in base and subbase layers of low-traffic pavements. The mastic coating of aggregates induces a viscoelastic behaviour and changes the resilient modulus with ...
Gaillard, Laura +3 more
openaire +2 more sources
Resilient Modulus Characterization of Compacted Cohesive Subgrade Soil
Applied Sciences, 2017 Soil investigations concerning cyclic loading focus on the evaluation, in particular, of design parameters, such as elastic modulus, Poisson’s ratio, or resilient modulus.
Wojciech Sas +4 more
doaj +1 more source
Advances in Materials Science and Engineering, 2021 In cold regions, the long-term stability of engineering facilities is unavoidably influenced by the negative temperature, freeze-thaw process, dry-wet process, and dynamic loading conditions induced by earthquakes and traffic loads.
Furong Liu +4 more
doaj +1 more source
Influence of Humidity State on Dynamic Resilient Modulus of Subgrade Soils: Considering Repeated Wetting‐Drying Cycles [PDF]
Advances in Materials Science and Engineering, 2021 The service performance of subgrade depends on the dynamic resilient modulus (MR) of subgrade soils. Meanwhile, due to complicated conditions such as rainfall infiltration, high temperature evaporation, and groundwater level fluctuations, it can be safely said that the humidity state and repeated wetting‐drying (WD) cycles affect the MR of subgrade ...
Gongfeng Xin +4 more
openaire +2 more sources
, 2020 Resilient Modulus of ACWC Virgin and ACWC+BioCS ...
Sihombing, A (via Mendeley Data) +1 more
core +1 more source
New Models for the Properties of Warm Mix Asphalt with Sasobit
CivilEng, 2022 Warm Mix Asphalt (WMA) is a set of technologies that uses additives to reduce binder viscosity and increase mixture workability, which provides a complete coating of aggregates at lower temperatures around 100 °C to 130 °C.
Morteza Rezaeizadeh Herozi +4 more
doaj +1 more source
Evaluation of Stiffness to Predict Rutting Resistance of Hot-Mix Asphalt: a Canadian Case Study
The Baltic Journal of Road and Bridge Engineering, 2014 This paper investigates the relationship between the stiffness and rutting resistance of hot-mix asphalt. Ten different types of hot-mix asphalt were examined.
Md. Safiuddin +2 more
doaj +1 more source
The Effect of Temperature on Dynamic Characteristics of Frozen Clay under Principal Stress Rotation
Advances in Materials Science and Engineering, 2021 The foundation soil is always subjected to complex stress, including continuous rotation of the principal stress caused by traffic and earthquake loads.
Bin-Long Zhang +4 more
doaj +1 more source
Freeze-Thaw Performance of Silt Sand Treated with Lignin
Advances in Civil Engineering, 2021 In cold regions, freeze-thaw action poses a significant hazard to road engineering. In order to avoid the adverse effects of inorganic materials on soil modification, we applied lignin, which is an environmentally friendly and organic polymer, to improve
Fu Zhu +4 more
doaj +1 more source
Transportes, 2019 The extraction of slate generates large volumes of waste that could be applied in paving. The dynamic Resilient Modulus (RM) test provides important data for the structural analysis of pavements. Although several studies have been carried out to evaluate
Raphael Lúcio Reis dos Santos +4 more
doaj +3 more sources