Results 151 to 160 of about 126,319 (298)

MXene‐Coated 3D Printed Horn Antennas for Ku Frequency Band

Advanced Materials Technologies, EarlyView.
An additive manufacturing approach to 3D printing horn antennas and coating them with Ti3C2Tx MXene is proposed. Rapid fabrication of lightweight, high‐performance antennas operating in the Ku‐band (12.4–18 GHz) has been demonstrated. The MXene‐coated antennas exhibit comparable electromagnetic performance to conventional, costly aluminum ones, with ...
Zahra Sarpanah Sourkouhi, Jamal Alhourani, Yury Gogotsi, Mohammad H. Zarifi   +3 more
wiley   +1 more source

Optofluidic Raman Analysis and Capacity Recovery in Li‐ion Cells

Advanced Materials Technologies, EarlyView.
Operando Raman spectroscopy is used to monitor the degradation of commercial Li‐ion cells. Using a microfluidic access port, small amounts of electrolyte are sampled into a hollow‐core optical fibre, where fibre‐enhanced Raman analysis reveals Li+ solvation changes and solvent evolution.
Ermanno Miele, Wesley M. Dose, Ian A. K. Davidson, Hesham Sakr, Natalie V. Wheeler, Francesco Poletti, Michael De Volder, Clare P. Grey, Jeremy J. Baumberg, Tijmen G. Euser   +9 more
wiley   +1 more source

Non‐Invasive Multidimensional Capacitive Sensing for In Vivo Traumatic Brain Injury Monitoring

Advanced Materials Technologies, EarlyView.
Single‐electrode, multidimensional capacitive sensors noninvasively assess cerebral autoregulation and compliance for traumatic brain injury monitoring. ABSTRACT Traumatic brain injury (TBI) is a major cause of death and disability, but invasive intracranial pressure (ICP) monitoring is risky, and current non‐invasive methods lack the resolution and ...
Shawn Kim, Yu‐Jen Cheng, Tianyi Li, Nathan White, Xu Wang, Kristyn Ringgold, Lauren Neidig, Younghoon Kwon, Jae‐Hyun Chung   +8 more
wiley   +1 more source

Extreme‐Temperature Resistant, Flexible, and Sensitive Strain Sensor for Aerospace Parachute Deployment

Advanced Materials Technologies, EarlyView.
In this study, we report a resistive‐type strain sensor fabricated using single‐walled CNTs, are used layer using the pray technique to deposit as conductive, and UV‐resin was spin‐coated as a protection layer. The sensor functioned in harsh temperature variation conditions from −50°C to 125°C without deterioration.
Jagan Singh Meena, Lucas Lum Yu Xiang, Dhivya Dharshini Kannan, Chun Fei Siah, Yeow Kheng Lim   +4 more
wiley   +1 more source

Three‐Dimensional Printed Microarchitected Hierarchically Porous Biodegradable PLA/S/CNT Nanocomposite Electrodes for High‐Performance Lithium–Sulfur Batteries

Advanced Materials Technologies, EarlyView.
Hierarchically microarchitected PLA/S/CNT cathodes are fabricated via scalable fused filament 3D printing as high‐sulfur‐loading hosts for rechargeable lithium–sulfur batteries. The assembled Li–S cells with sulfur loadings up to 17 mg cm−2 deliver an areal capacity of 9.2 mAh cm−2 and retain 96% of their discharge capacity after 100 charge–discharge ...
Vinay Gupta, Pawan Verma, Fahad Alam, Krishnaiahnahundi Manjunathaswamy Mohan, Shanumgam Kumar   +4 more
wiley   +1 more source

On–Off Switchable Micromotors for Use in Steerable Microvehicles

Advanced Robotics Research, EarlyView.
Electrically controllable micromotors and microvehicles are developed by tuning the diffusion of the fuel. Self‐propelled micromotors using bubble propulsion show great promise for miniaturized devices with multiuse purposes such as cargo delivery and sensing. However, there is currently no method to electrically switch the micromotors on or off. Here,
Hugo Severinsson, Eswaran Murugasen, Jose G. Martinez, Edwin W. H. Jager   +3 more
wiley   +1 more source

WIRELESS CHARGING FOR ELECTRICAL VEHICLES

INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT
Nowadays Wireless power transmission (WPT) is popular and gaining technology finding its application in various fields. The power is transferred from a source to an electrical load without the need of interconnections. Wireless power Transmission (WPT) is useful to power electrical devices where physical wiring is not possible or inconvenient.
openaire   +1 more source

Energy Consumption Optimization in Trajectory Planning for Fuel Cell Hybrid Uavs Based On HMPC

Advanced Robotics Research, EarlyView.
The endurance limitation of multirotor drones is a critical challenge. This study adopts a hybrid power system of fuel cells and lithium‐ion batteries. Using Nondominated Sorting Genetic Algorithm II, it integrates trajectory planning with energy management optimization.
Xindi Wang, Jianyang Dong, Yongming Yao, Kaijin Hu, Jianxiong Cui, Yikai Luo, Jiawen Zhang, Shichao Niu   +7 more
wiley   +1 more source

3D Printing of Soft Robotic Systems: Advances in Fabrication Strategies and Future Trends

Advanced Robotics Research, EarlyView.
Collectively, this review systematically examines 3D‐printed soft robotics, encompassing material selections, function integration, and manufacturing methodologies. Meanwhile, fabrication strategies are analyzed in order of increasing complexity, highlighting persistent challenges with proposed solutions.
Changjiang Liu, Bin Cui, Xumin Huang, Xiaoyu (Rayne) Zheng, T. Thang Vo‐Doan, Ruirui Qiao   +5 more
wiley   +1 more source

A deep learning-based IoT malware detection approach for electric vehicle charging stations. [PDF]

Sci Rep
Xia L, Chen Y, Han L.
europepmc   +1 more source