Results 91 to 100 of about 10,619 (226)

Role of infill parameters on the mechanical performance and weight reduction of PEI Ultem processed by FFF

open access: yes, 2020
In comparison with conventional manufacturing technologies, Fused Filament Fabrication (FFF) offers countless benefits. It broadens the horizons of the design of structural components with high geometrical complexity, and lighter elements can be obtained
Albert Forés-Garriga   +3 more
semanticscholar   +1 more source

The iPP Printing Paradox: Interlayer Adhesion Through Crystallization

open access: yesPolymer Engineering &Science, EarlyView.
In fused filament fabrication of isotactic polypropylene, high molecular weight and a high print speed increase the shear during deposition. This shear promotes the formation of the ductile β‐phase at the interphase, which improves interlayer adhesion, as shown by an eightfold increase in fracture energy measured via a T‐peel test on two printed ...
Paul M. H. van Heugten   +5 more
wiley   +1 more source

Friction‐Corrected In‐Situ Viscosity Measurement in Material Extrusion: A Force‐Based Method Validated Against Capillary Rheometry Using Identical Nozzle Geometry

open access: yesPolymer Engineering &Science, EarlyView.
In the filament force measurement (FFM), the friction of the solid filament, determined in an open‐bore reference, is subtracted from the measured extrusion force to obtain the capillary force. The resulting apparent viscosity is compared with high‐pressure capillary rheometry (HPCR) using the identical printer nozzle in both instruments.
Philipp Beier   +5 more
wiley   +1 more source

Surface dose measurements and comparison of unflattened and flattened photon beams

open access: yesJournal of Medical Physics, 2016
The purpose of this study was to evaluate the central axis dose in the build-up region and the surface dose of a 6 MV and 10 MV flattened photon beam (FB) and flattening filter free (FFF) therapeutic photon beam for different square field sizes (FSs) for
Ashokkumar Sigamani   +8 more
doaj   +1 more source

Influence of Matrix Selection and Drawing Conditions on TLCP Reinforcement in High‐Modulus Composites for Material Extrusion Additive Manufacturing

open access: yesPolymer Engineering &Science, EarlyView.
This work examines the influence of material selection and complex viscosity ratio on processing strategies and resulting TLCP reinforcement in wholly thermoplastic composites. By Comparing dual and single extruder processing approaches, this study highlights the relationships between material rheology, processing conditions, fibrillation and ...
Cailean Q. Pritchard   +9 more
wiley   +1 more source

A phantom study on the behavior of Acuros XB algorithm in flattening filter free photon beams

open access: yesJournal of Medical Physics, 2015
To study the behavior of Acuros XB algorithm for flattening filter free (FFF) photon beams in comparison with the anisotropic analytical algorithm (AAA) when applied to homogeneous and heterogeneous phantoms in conventional and RapidArc techniques ...
K R Muralidhar   +5 more
doaj   +1 more source

Extruder‐based 3D printing of eco‐friendly polymers

open access: yesPolymer International, EarlyView.
Eco‐friendly polymers, such as biodegradable and recycled materials, offer significant potential for the production of high‐quality 3D‐printed components, provided that their properties and characteristics meet the requirements of extruder‐based 3D printing.
Rui Zhang   +7 more
wiley   +1 more source

Photogenerated fluphenazine radical cations for antiviral functionalization of polypropylene masks

open access: yesPolymer International, EarlyView.
Fluphenazine impregnated into nonwoven polypropylene masks is photoexcited to a radical cation, which inactivates viruses on the polymer surface without causing damage to the masks. Abstract The incorporation of photoactive molecules into polymeric substrates offers a compelling route to introduce advanced functionality while preserving the host ...
Lilian Martins‐Nascimento   +4 more
wiley   +1 more source

Influence of porosity and architecture on the mechanical and acoustic properties of FFF‐printed PLA structures

open access: yesPolymer International, EarlyView.
The influence of porosity and infill pattern (architecture) on the mechanical and acoustic properties of FFF‐printed PLA is investigated. Ultrasonic analysis highlights the dominant role of interlayer porosity, revealing anisotropic behavior and a transition in elastic properties with increasing porosity.
Makki Ajmi   +4 more
wiley   +1 more source

Current Trends and Future Prospects of Integrating Electrospinning With 3D Printing Techniques for Mimicking Bone Extracellular Matrix Scaffolds

open access: yesJournal of Polymer Science, Volume 63, Issue 6, Page 1481-1504, 15 March 2025.
ABSTRACT This article presents a review of the recent findings on the combination of electrospun nanofibers and three‐dimensional (3D)‐printed structures for extracellular matrix (ECM) scaffolds for bone tissue engineering. We explore the synergy between electrospinning (ES), which produces highly porous, fibrous structures from materials like collagen
Kardo Khalid Abdullah, Kolos Molnár
wiley   +1 more source

Home - About - Disclaimer - Privacy