Results 71 to 80 of about 32,675 (265)

Interconnection of propagation velocity and electrical conductivity of flame in ICEs

VESTNIK of Samara University. Aerospace and Mechanical Engineering, 2013
Investigation of regularities of interrelation between the local propagation velocity and electrical conductivity of flame with varying composition of the mixture in a spark-ignition engine was conducted. The electrical conductivity and the velocity of flame propagation near the spark plug with the average temperature in the combustion chamber being ...
P. V. Ivashin, M. P. Ramazanov, A. Y. Tverdokhlebov, A. P. Shaikin, I. S. Yasnikov   +4 more
openaire   +2 more sources

Thermal Calculations for Co‐Firing of Hydrogen/Ammonia and Coal in 660‐MW Coal‐Fired Boilers

Asia-Pacific Journal of Chemical Engineering, EarlyView.
ABSTRACT To achieve a clean energy transition under the dual carbon goals, blending hydrogen/ammonia into pulverized coal boilers represents a key technological pathway. Different hydrogen/ammonia co‐firing ratios (5%–50%) are investigated for their impact on the thermodynamic characteristics of 660‐MW supercritical boiler at 100% and 20% boiler ...
Yaodong Da, Nana Hou, Weipeng Wang, Yongqiang Chang, Xin Liu, Feng Pan, Defu Che, Lei Deng   +7 more
wiley   +1 more source

Study on Knocking Intensity under In-Cylinder Flow Field in SI Engines Using a Rapid Compression Machine

Journal of Thermal Science and Technology, 2013
Knocking intensity under the in-cylinder flow field was investigated by using a rapid compression machine (RCM). The nitrogen diluted and non-diluted fuel-air mixtures were employed for the examination of the combustion characteristics under the in ...
Taiga HIBI, Takashi KOHATA, Yosuke TSUMORI, Shintaro NAMIKI, Kazuya SHIMA, Masato KATSUMATA, Mitsuaki TANABE   +6 more
doaj   +1 more source

Inorganic‐Directed Charge Delocalization Channels: Boosting Uniform Charge Distribution and Rapid Na+ Transport for Solid‐State Sodium Metal Batteries

Carbon Energy, EarlyView.
This work develops a PM@PN composite solid electrolyte via inorganic‐induced organic molecular reconstruction. It constructs continuous interfacial ion superhighways, enables uniform Na+ deposition, and significantly enhances ionic conductivity and electrochemical stability for all‐solid‐state sodium metal batteries.
Jiaze Li, Rong Yang, Aoyi Jiang, Xiaobin Li, Qianwei Zhang, Xin Dong, Hongyu Shang, Ying Liu, Yinglin Yan, Yunhua Xu, Jae‐Kwang Kim, Jou‐Hyeon Ahn   +11 more
wiley   +1 more source

Influence of Particle Size, Moisture, and Cloud Density on Wood Dust Ignition

Chemie Ingenieur Technik, EarlyView.
The ignition and combustion of particle clouds are strongly affected by particle interactions. This study uses spectroscopy to examine effects of particle size, water content, and cloud density. Results show ignition delay rises with larger size and density, whereas combustion duration depends mainly on water and density due to moisture‐driven ...
Matteo Giesen, Daniel Bernhardt, Michael Beckmann   +2 more
wiley   +1 more source

Experimental research on flame propagation characteristics of coal dust combustion

Journal of Measurement Science and Instrumentation, 2021
The presence of coal dust explosions in coal mining are significant safety hazards. This study mainly explores the flame propagation of coal dust combustion so as to provide a theoretical basis for the prevention and control of coal dust explosions.
LIU Yifei, ZHANG Yun, YANG Zhenxin, LIU Xuanshen, CHEN Chengfang, BU Lingtao, XU Sen, CAO Weiguo   +7 more
doaj  

Ignition and flame sptead in laminar mixing layers [PDF]

, 1994
In order to identify some of the mathematical problems encoun-tered in analyzing the ignition and ñame spread in mixing layéis, \ve shall describe the structure of the laminar mixing layer between two parallel streams of a fu el and air, initially ...
Liñán Martínez, Amable
core   +1 more source

Modelling of continuous low‐temperature emulsion co‐polymerization in 3D‐printed reactor

The Canadian Journal of Chemical Engineering, EarlyView.
A kinetic model for the emulsion copolymerization of butyl acrylate/styrene at low temperatures is proposed and validated against experiments with a redox initiator system. The model was successfully transferred to a 3D‐printed tubular reactor and conversions of more than 80% and small particles sizes below 40 nm were observed.
Ferel Issa, Andreas Reinbeck, Kristina M. Zentel   +2 more
wiley   +1 more source

Effect of different flue gas recirculation rates on low‐NOx combustion characteristics: A numerical simulation based on the combustion process of a gas boiler

The Canadian Journal of Chemical Engineering, EarlyView.
Abstract NOx emissions from gas boilers severely impact the environment, and flue gas recirculation (FGR) technology can effectively reduce such emissions, yet the effects of different FGR rates on combustion performance and NOx formation remain unclear. This study thus used numerical simulation (via ANSYS Fluent, adopting the realizable k‐ε turbulence
Chao Min, Shuhao Xu, Yitao Yang, Peng Wang   +3 more
wiley   +1 more source

Stability and Liftoff of a N2-in-H2 Jet Flame in a Vitiated Co-flow at Atmospheric Pressure

Eurasian Chemico-Technological Journal, 2014
The stability and liftoff characteristics of a nitrogen (N2) diluted hydrogen (H2) jet flame in a vitiated co-flow are investigated experimentally with particular attention focused on regimes where multiple stabilization mechanisms are active ...
A. A. North, D. Frederick, J. Y. Chen, R. Dibble, A. Gruber   +4 more
doaj   +1 more source