Results 1 to 10 of about 176,953 (219)
Fracture and Structural Integrity, 2022 The major drawback observed in the ceramic particles reinforced aluminium matrix composites (AMCs) is the reduction of ductility. Incorporating fine metallic particles along with the ceramic reinforcements in the aluminium matrix tends to improve the ...
Renjin J. Bright +1 more
doaj +1 more source
Fracture and Structural Integrity, 2023 In the present study, the impact behavior of gravity casting AlSi10Mg alloy was evaluated with an instrumented Charpy pendulum. The effect of hot isostatic pressing, also followed by a T6 treatment, was analyzed in comparison with samples in the as-cast,
Luca Girelli +6 more
doaj +1 more source
Microstructural Impact on Fatigue Crack Growth Behavior of Alloy 718
Metals, 2022 Alloy 718 for forged parts can form a wide range of microstructures through a variety of thermo-mechanical processes, depending on the number of remelting processes, temperature and holding time of homogenization annealing, cogging and the number of ...
Christian Gruber +6 more
doaj +1 more source
Blue Diode Laser Welding of Commercially Pure Titanium Foils
Quantum Beam Science, 2022 The need for thin foil welding is increasing significantly, particularly in the electronic industries. The technologies that are currently available limit the joining processes in terms of materials and their geometries. In this paper, a series of trials
Tim Pasang +10 more
doaj +1 more source
Dwell Fatigue Crack Growth Behavior of CP-Ti TA2 Welded Joint at 25 °C and 200 °C
Metals, 2023 We report on studies of the dwell fatigue crack growth (FCG) behavior of commercial pure titanium (CP-Ti) TA2 weld joints at 25 °C and 200 °C. Taking into account the effects of load ratio and dwell temperature, the impact of dwell on FCG behavior and ...
Le Chang +3 more
doaj +1 more source
Insights on the fractal-fracture behaviour relationship [PDF]
Materials Research, 1998 The fractals theory has been increasingly applied in the field of materials science and engineering. Models of fractal lines and surfaces have been generated to describe the microstructural features of materials.
José de Anchieta Rodrigues +1 more
doaj +1 more source
Enhancement of E-glass fiber/epoxy composite bending performance via graphene addition [PDF]
Journal of Particle Science and Technology, 2020 This paper presents an experimental investigation using graphene nanoplatelets (GnPs) to enhance the bending performance of E-glass fiber/epoxy composites.
Mohammad Imanparast, Hamed Khosravi
doaj +1 more source
Flexural Behavior of Fiber–Metal Laminates Reinforced with Surface-Functionalized Nanoclay [PDF]
Mechanics of Advanced Composite Structures, 2018 The effects of surface-functionalized Na+-montmorillonite nanoclay particles on the flexural behavior of E-glass fiber-reinforced aluminum (GLARE) laminates were investigated.
Sh. Vahedi +3 more
doaj +1 more source
Wear properties of Al/TiO2 composites fabricated via combined compo-casting and APB process
Science and Engineering of Composite Materials, 2022 Compo-casting method is one of the popular techniques to produce metal-based matrix composites. But one of the main challenges in this process is un-uniform spreading of reinforced subdivisions (particles) inside the metallic matrix and the lack of ...
Wang Daya +5 more
doaj +1 more source
Fatigue Bending of V-Notched Cold-Sprayed FeCoCrNiMn Coatings
Metals, 2022 Cold-spray coatings were produced by FeCoCrNiMn high-entropy alloy powders deposited on carbon steel substrate. The coatings were realized at intermediate temperature and high pressure (at 1100 °C and 7 MPa).
Pasquale Cavaliere +5 more
doaj +1 more source