Results 51 to 60 of about 46,576 (257)

Geometric Calibration of Thermal Infrared Cameras: A Comparative Analysis for Photogrammetric Data Fusion

Metrology
The determination of precise and reliable interior (IO) and relative (RO) orientation parameters for thermal infrared (TIR) cameras is critical for their subsequent use in photogrammetric processes.
Neil Sutherland, Stuart Marsh, Fabio Remondino, Giulio Perda, Paul Bryan, Jon Mills   +5 more
doaj   +1 more source

Landsat 8 Operational Land Imager On-Orbit Geometric Calibration and Performance

Remote Sensing, 2014
The Landsat 8 spacecraft was launched on 11 February 2013 carrying the Operational Land Imager (OLI) payload for moderate resolution imaging in the visible, near infrared (NIR), and short-wave infrared (SWIR) spectral bands.
James Storey, Michael Choate, Kenton Lee
doaj   +1 more source

Innovative Processing of Compacted Waste Aluminum Alloy Powders via Controlled Remelting and Solidification

Advanced Engineering Materials, EarlyView.
This study demonstrates an efficient recycling route for out‐of‐spec AlSi10Mg atomized powders through compaction and arc remelting followed by suction casting. By correlating compaction load, cooling rate, and resulting microstructure, we show that intermediate pressures (50–80 kN) and rapid cooling refine dendrites, reduce porosity, and enhance ...
Mila Christy de Oliveira, Marcella Gaute Cavalcante Xavier, Abdoul‐Aziz Bogno, Piter Gargarella, José Eduardo Spinelli   +4 more
wiley   +1 more source

Microstructural Evolution and Vacancy Defect Formation in Mn–Mo–Ni RPV Steel Under Low Cycle Fatigue: Insights From EBSD and PALS

Advanced Engineering Materials, EarlyView.
Low‐cycle fatigue damage in Mn–Mo–Ni reactor pressure vessel steel is examined using a combined electron backscatter diffraction and positron annihilation lifetime spectroscopy approach. The study correlates texture evolution, dislocation substructure development, and vacancy‐type defect formation across uniform, necked, and fracture regions, providing
Apu Sarkar, Dhanadeep Dutta, G. Bharat Reddy   +2 more
wiley   +1 more source

On-Orbit Geometric Calibration and Accuracy Validation of the Jilin1-KF01B Wide-Field Camera

Remote Sensing
On-orbit geometric calibration is key to improving the geometric positioning accuracy of high-resolution optical remote sensing satellite data. Grouped calibration with geometric consistency (GCGC) is proposed in this paper for the Jilin1-KF01B satellite,
Hongyu Wu, Guanzhou Chen, Yang Bai, Ying Peng, Qianqian Ba, Shuai Huang, Xing Zhong, Haijiang Sun, Lei Zhang, Fuyu Feng   +9 more
doaj   +1 more source

A Numerical–Experimental Approach for Multi‐Matrix Fiber‐Reinforced Plastics Characterization Using Finite Element Model Updating

Advanced Engineering Materials, EarlyView.
A numerical–experimental framework is developed for characterizing multi‐matrix fiber‐reinforced polymers (MM‐FRPs) combining epoxy and polyurethane matrices. Harmonic bending tests are integrated with finite element model updating (FEMU) to simultaneously identify elastic and viscoelastic material parameters.
Rodrigo M. Dartora, Tales V. Lisbôa, Axel Spickenheuer, Rogério J. Marczak, Jakson M. Vassoler   +4 more
wiley   +1 more source

Geometric Calibration of Thermographic Cameras [PDF]

, 2013
This chapter presents an overview of thermal imaging sensors for photogrammetric close-range applications. In particular, it presents results of the geometric calibration of thermographic cameras as they are used for building inspection and material testing.
Thomas Luhmann, Johannes Piechel, Thorsten Roelfs   +2 more
openaire   +1 more source

A Note on Geometric Calibration of Multiple Cameras and Projectors

2020 43rd International Convention on Information, Communication and Electronic Technology (MIPRO), 2020
Geometric calibration of cameras and projectors is an essential step that must be performed before any imaging system can be used. There are many well-known geometric calibration methods for calibrating systems comprised of multiple cameras, but simultaneous geometric calibration of multiple projectors and cameras has received less attention.
Tomislav Petkovic, Simone Gasparini, Tomislav Pribanic   +2 more
openaire   +3 more sources

Combined Process‐ and Phase‐Field‐Simulation to Predict the Microstructure of Single‐Crystal Ni‐Based Superalloys

Advanced Engineering Materials, EarlyView.
A combined finite element and phase‐field approach predicts the evolution of microstructure during the directional solidification of Ni‐based superalloys. The model reveals how withdrawal rate, temperature gradient, and wall thickness control the dendrite spacing, highlighting the strong effect of surface regions in thin sections where dendrite growth ...
Sean Böhm, André B. Baldissera, Rainer Völkl, Uwe Glatzel   +3 more
wiley   +1 more source

Bistatic ISAR Sparse Imaging Method for High-Speed Moving Target Based on Dechirping Processing

International Journal of Antennas and Propagation, 2019
Bistatic inverse synthetic aperture radar (ISAR) can increase the probability of tracking the high-speed target and provide more angle information than monostatic ISAR.
Chuangzhan Zeng, Weigang Zhu, Xin Jia
doaj   +1 more source