Results 71 to 80 of about 421,221 (283)

Thermomechanical Fatigue and Creep–Fatigue Interaction of Inconel 718 Additively Manufactured by Laser Beam Powder Bed Fusion

Advanced Engineering Materials, EarlyView.
Thermomechanical fatigue tests of laser beam powder bed fusion (PBF‐LB) Inconel 718 show that the additively manufactured material reaches almost the lifetimes of conventionally‐rolled material under no‐dwell conditions. Introducing dwell times at the maximum temperature markedly reduces the lifetimes due to pronounced grain boundary sliding associated
Stefan Guth, Tomáš Babinský, Jan Lars Riedel, Wen Hao Kan, Aijun Huang, Martin Heilmaier, Ivo Šulák   +6 more
wiley   +1 more source

Effect of Laser Deoxidation on Adhesive‐Bonded Aluminum in an Oxygen‐Free Atmosphere

Advanced Engineering Materials, EarlyView.
This study investigates laser ablation of aluminum under oxygen‐free conditions. The goal is to produce oxide‐free substrates that enable improved adhesive bonding with epoxy. Optimized laser parameters (90% overlap, 300 µJ) combined with oxide‐free substrates result in the highest tensile strength of the adhesive bond.
Sandra Gerland, Finn‐Lennard Janthur, Sarah Seffer, Jörg Hermsdorf, Ludger Overmeyer, Annika Raatz   +5 more
wiley   +1 more source

INFLUENCE OF TANGENTIAL CUTTING FORCE ON A STRESS STATE OF GRINDING INSTRUMENT [PDF]

, 2018
Estimation of influence of tangential cutting force on a stress state of grinding ...
KOVALENKO, A., NAZARENKO, O., TANTSURA, Ganna, VINNICHENKO, Ye.   +3 more
core  

Co-grinding significance for calcium carbonate–calcium phosphate mixed cement. Part I: effect of particle size and mixing on solid phase reactivity [PDF]

, 2011
In part I of this study we aim to evaluate and control the characteristics of the powders constituting the solid phase of a vaterite CaCO3–dicalcium phosphate dihydrate cement using a co-grinding process and to determine their impact on cement setting ...
Combes, Christèle, Le Bolay, Nadine, Rey, Christian, Tadier, Solène   +3 more
core   +2 more sources

Removing Oxide Layers and Retaining Oxide‐Free Steel Surfaces by Polishing in Oxygen‐Free Atmosphere

Advanced Engineering Materials, EarlyView.
In this study, the efficacy of wet mechanical polishing under an oxygen‐free atmosphere for deoxidation and the retention of an oxide‐free steel surface are elucidated using X‐ray photoelectron spectroscopy. The methodology proved successful; however, the results were highly dependent on the preparation of the solvents used to clean the samples after ...
Friedrich Bürger, Lienhard Wegewitz, Wolfgang Maus‐Friedrichs   +2 more
wiley   +1 more source

Influence of an Oxygen‐Free Atmosphere on Diamond‐Single‐Grain Scratching of Ti–6Al–4V

Advanced Engineering Materials, EarlyView.
Single‐grain scratching of Ti–6Al–4V is investigated under controlled, oxygen‐free, and ambient atmospheres using a novel experimental setup with in situ high‐speed imaging. The approach enables direct observation of chip formation and adhesion under suppressed oxidation.
Berend Denkena, Benjamin Bergmann, Michael Zenger   +2 more
wiley   +1 more source

CVD matching analysis of worm grinding and dressing roller based on sector concentric-ring model

Jin'gangshi yu moliao moju gongcheng
Objectives: As the core component of major equipment, the tooth surface accuracy of gears is ultimately guaranteed by the gear grinding process. The electroplated worm grinding roller is an indispensable precision machining tool for dressing worm ...
Laigui LEI, Enhou CHEN, Yanjun ZHAO, Wei WANG, Jialu WU, Longhui GU, Wushan WU, Yuan LI   +7 more
doaj   +1 more source

Al–Cu Composite Casting of Laser‐Deoxidized Copper: Bonding, Interfacial Chemistry, and Thermal Conductivity

Advanced Engineering Materials, EarlyView.
This study investigates laser‐based oxide removal of Cu inserts in oxygen‐free conditions and examines long‐term oxidation kinetics and surface chemistry under different atmospheres via X‐ray photoelectron spectroscopy. Al–Cu compound casting with differently oxidized surfaces is performed, and intermetallic phase formation, morphology, and thermal ...
Timon Steinhoff, Finn‐Lennard Janthur, Sascha Zimmermann, Sarah Seffer, Jörg Hermsdorf, René Gustus, Ludger Overmeyer, Wolfgang Maus‐Friedrichs, Hans Jürgen Maier, Christian Klose   +9 more
wiley   +1 more source

Mechanical property improvement of wire-arc additive manufactured 06Cr19Ni9 steel based on ultrasonic strengthening grinding process

Journal of Materials Research and Technology
Wire-arc additive manufacturing (WAAM) technology offers an effective approach to fabricating complex metallic components. However, the existing WAAM process is limited in producing a metallic component with high mechanical strength.
Jinrui Xiao, Yiteng Zhang, Xincheng Xie, Wenfeng Ding, Zhuan Zhao, Zhongwei Liang   +5 more
doaj   +1 more source

Characterisation of the relationship between surface texture and surface integrity of superalloy components machined by grinding [PDF]

, 2013
The surface texture of a machined component is influenced largely by the processing parameters used during machining and hence, there is a relationship between both the formation of the surface texture and surface integrity of the machined component.
Liu, Geng, Liu, Lan, Qin, Yi, Zeng, Quanren   +3 more
core