Results 11 to 20 of about 8,464 (186)
Analysis of the High Chromium Cast Iron Microstructure after the Heat Treatment
Archives of Foundry Engineering, 2014 The article presents results of heat treatment on the high chromium cast iron. The study was carrying out on samples cut from the casting made from chromium cast iron. Those were hardened at different temperatures, then tempered and soft annealed.
Kopyciński D. +3 more
doaj +3 more sources
The Althoff-Radtke Test Adapted for High Chromium Cast Iron
Archives of Foundry Engineering, 2016 The paper presents results of the possibility of adapting the Althoff-Radtke test for High Chromium Cast Iron. The Althoff-Radtke test is a clump attempt used for steel.
Kopyciński D. +4 more
doaj +3 more sources
The Effect of Addition of Titanium on The Structure and Properties of High Chromium Cast Iron
Archives of Foundry Engineering, 2015 The paper presents results of Ti-addition to High Chromium Cast Iron (HCCI) on the structure and selected mechanical properties. For this study casted two sets of cylinders with dimensions ø20 mm, ø15 mm × 250 mm, for the High Chromium Cast Iron (HCCI ...
Kopyciński D. +3 more
doaj +3 more sources
Revista Facultad de Ingeniería, 2016 High-Chromium White Cast Iron is a material highly used in mining and drilling shafts for oil extraction, due to its high wear resistance. However, because of the austenitic matrix found in the as-cast state, an adequate heat treatment cycle is necessary.
Oscar Fabián Higuera-Cobos +2 more
doaj +2 more sources
Archives of Metallurgy and Materials, 2017 The results of studies of the effect of different amounts of the Fe-Ti inoculant on structure and selected mechanical properties of High Chromium Cast Iron (conventionally abbreviated as HCCI) are presented.
Kopyciński D. +4 more
doaj +3 more sources
An Overview on Types of White Cast Irons and High Chromium White Cast Irons
Journal of Physics: Conference Series, 2020 Abstract Crushing and grinding are widely used in mining, mineral processing, cement making, and coal power generation. The mechanical components that contact with materials being processed are working under the conditions of high abrasion and impact.
Mbulelo Ngqase, Xiaowei Pan
openaire +3 more sources
THE INFLUENCE OF CHEMICAL COMPOSITION ON THE CORROSION RATE OF HIGH-CHROMIUM CAST IRON
Литьë и металлургия, 2017 The influence of the chemical composition on the corrosion rate of high-chromium cast iron was researched. During the castings’ cooling process the replacement of the atoms of nickel, iron and manganese by the atoms of chromium in the carbides took place.
V. V. Netrebko, I. P. Volchok
doaj +2 more sources
SEM and EBSD Investigations of High-Chromium Cast Irons [PDF]
Microscopy and Microanalysis, 2008 Extended abstract of a paper presented at Microscopy and Microanalysis 2008 in Albuquerque, New Mexico, USA, August 3 – August 7 ...
Hinckley, Brook +4 more
openaire +3 more sources
Effect of Titanium Inoculation on Tribological Properties of High Chromium Cast Iron
Archives of Foundry Engineering, 2017 The present investigation focuses on the study of the influence of titanium inoculation on tribological properties of High Chromium Cast Iron. Studies of tribological properties of High Chromium Cast Iron, in particularly the wear resistance are ...
Siekaniec D. +5 more
doaj +3 more sources
TO SELECTION OF TECHNOLOGICAL SCHEME OF SOFTENING HEAT TREATMENT FOR HIGH CHROMIUM CAST IRON
Nauka ta progres transportu, 2014 Purpose. High chromium cast irons with austenitic matrix have low machinability. The aim of work is search of new energy-saving modes of preliminary softening heat treatment enhancing the machinability of castings by forming an optimum microstructure ...
V. G. Efremenko +4 more
doaj +1 more source