Hot Workability of 300M Steel Investigated by In Situ and Ex Situ Compression Tests
Metals, 2019 In this work, hot compression experiments of 300M steel were performed at 900−1150 °C and 0.01−10 s−1. The relation of flow stress and microstructure evolution was analyzed. The intriguing finding was that at a lower strain rate (0.
Rongchuang Chen +3 more
doaj +2 more sources
Improving the Corrosion Resistance of NiNb-Based Bulk Metallic Glass through the Hot Compression
Advances in Materials Science and Engineering, 2023 This paper aims to study and evaluate the corrosion resistance of Ni55Nb45 and Ni55Nb35Co5Zr5 bulk metallic glasses (BMGs) in an environment similar to proton exchange membrane fuel cells. Moreover, the hot compression process was carried out to find the
Abeer Abdullah Al Anazi +5 more
doaj +2 more sources
Journal of Materials Research and TechnologyThe uniaxial hot compression experiments of Mg-7Gd-3Y-0.5Zr (VW73K) alloy were carried out by using the Instron5982 mechanical testing machine with environmental box. The hot deformation behavior at 350–500 °C and 0.001–1 s−1 was studied.
Dongzhen Wang +4 more
doaj +2 more sources
Influence of Processing Parameters on the Mechanical Properties of Peek Plates by Hot Compression Molding. [PDF]
Materials (Basel), 2022 Thermoplastic components are gaining more and more attention due to their advantages which include high specific strength, high toughness, and low manufacturing costs.
Li T, Song Z, Yang X, Du J.
europepmc +2 more sources
Indentation Response of Calcium Aluminoborosilicate Glasses Subjected to Humid Aging and Hot Compression. [PDF]
Materials (Basel), 2021 Aluminoborosilicate glasses find a wide range of applications, which require good mechanical reliability such as surface damage resistance. Calcium aluminoborosilicate (CABS) glasses have recently been found to exhibit so-called intermediate behavior in ...
Ren X +5 more
europepmc +2 more sources
Hot Compression Behavior and Processing Maps of 6063 Aluminum Alloy Under Medium Strain Rate. [PDF]
Materials (Basel)A hot compression test was conducted across a range of temperatures (350, 400, 450, and 500 °C) and varying strain rates (0.001–10 s−1) to explore the hot compression behavior of the 6063 alloy.
Wang Z +6 more
europepmc +2 more sources
Hot Deformation Behavior of Homogenized Mg-13.5Gd-3.2Y-2.3Zn-0.5Zr Alloy via Hot Compression Tests. [PDF]
Materials (Basel), 2018 Mg-Gd-Y-Zn-Zr Mg alloys show excellent performance in high-end manufacturing due to its strength, hardness and corrosion resistance. However, the hot deformation and dynamic recrystallization (DRX) behaviors of Mg-13.5Gd-3.2Y-2.3Zn-0.5Zr were not studied.
Zhang Z +6 more
europepmc +2 more sources
Focal areas of increased lipid concentration on the coating of microbubbles during short tone-burst ultrasound insonification. [PDF]
PLoS ONE, 2017 Acoustic behavior of lipid-coated microbubbles has been widely studied, which has led to several numerical microbubble dynamics models that incorporate lipid coating behavior, such as buckling and rupture.
Klazina Kooiman +9 more
doaj +1 more source
Material constitutive behaviour and microstructure study on aluminium alloys for friction stir welding [PDF]
, 2010 The material constitutive behaviour and microstructure of Aluminium alloys 6082 and 7449 were studied with the Gleeble hot compression test. The novel aspect of the work is that the testing was done at high strain-rates and at temperatures within 5 K ...
Colegrove, Paul A. +4 more
core +1 more source
On the Hot Deformation of a Fe-Al-Ta Iron Aluminide Prepared via Laser Powder Bed Fusion
Crystals, 2023 In the present work, a combined process of laser powder bed fusion (LPBF) and hot working in terms of microstructure refinement was investigated for Fe-25Al-1.5Ta alloy samples.
Aliakbar Emdadi +4 more
doaj +1 more source