Journal of Materials Research and TechnologyLaser wire additive manufacturing GH3039 samples with different process parameters are prepared. Then, hot corrosion test (Na2SO4+NaCl at 900 °C) is carried out.
Zehao Chen +7 more
doaj +2 more sources
Performance Evaluation of Anti-Corrosive Materials for Prefabricated Cabin in Substations [PDF]
Cailiao Baohu, 2023 The corrosion resistance performance of prefabricated cabin is an important indicator assuring the 40 a service life of the prefabricated module cabin substation， so the selection of the anti-corrosion materials used is crucial.In this research， eight ...
ZHOU Jicheng, LI Hao, FAN Junpeng, LIANG Weifeng, LI Jiale
doaj +1 more source
Research Progress on High-Temperature Oxidation and Corrosion Mechanisms of Aluminide Coatings [PDF]
Cailiao Baohu, 2023 Aluminide coatings are widely used to protect engine hot-section components such as turbine blades， but during service， they are prone to high-temperature oxidation and hot corrosion，resulting in failure.Aiming at the failure of aluminide coatings in ...
XIE Yuhao, QI Haoxiong, MA Rui, MENG Guohui, LIU Meijun, YANG Guanjun
doaj +1 more source
Rare Earth-Based Compounds as Inhibitors of Hot-Corrosion Induced by Vanadium Salts. [PDF]
Materials (Basel), 2019 Flores-Garcia NS +6 more
europepmc +3 more sources
Hot corrosion behavior of Yb2Si2O7 ceramic by NaVO3 at 500 °C to 900 °C
Journal of Asian Ceramic Societies, 2021 The hot corrosion behavior of Yb2Si2O7 bulk exposed to NaVO3 was investigated at 500–900°C. Results indicated that the hot corrosion reaction could occur at 500°C, the corrosion products were composed of YbVO4 and SiO2 at 500–900°C.
Yongqiu Zhang +6 more
doaj +1 more source
Journal of Materials Research and Technology, 2023 Hot salt corrosion behavior of TNM alloy (Ti-44Al-4Nb-1.5Mo-(B, Y) (at.%)) was investigated in cyclic conditions at 750 °C, 850 °C and 950 °C for 100 h in the 75 wt% Na2SO4 + 25 wt% NaCl salt mixture. The hot salt corrosion resistance of γ、α2 and β phase
By Yefei Zhang +5 more
doaj +1 more source
Comparative Study on the Coating Properties of Hot - Formed Steel with Different Coatings [PDF]
Cailiao Baohu, 2021 In recent years, coated hot - formed steel parts have been widely used in car bodies, and a good coating performance is a key factor for these parts to obtain good corrosion resistance.
ZHOU Lin, WANG Hui, JIANG Jin - jing
doaj +1 more source
Analysis and Discussion on the Anti - Corrosion System of Hot Dip Galvanizing for Steel Components in Guangzhou Substations [PDF]
Cailiao Baohu, 2021 In this work, 9 substations with typical atmospheric environment characteristics were selected and carried out the atmospheric corrosion tests on - site in Guangzhou area, and the test suggested that the severe atmospheric corrosion grade of Guangzhou ...
WANG Wen - jun, KONG Gang, LAI De - lin, CHE Chun - san, LI Chen - tao, LIN Li - bo, CAI Di
doaj +1 more source
Hot corrosion effect of the vacuum arc melted (a2/γ)Ti-48Al-2Nb-0.7Cr-0.3Si alloy under an environment of NaCl-Na2SO4 salt [PDF]
MATEC Web of Conferences, 2023 The Ti-48Al-2Nb-0.7Cr-0.3Si alloy comprising of α2-Ti3Al and γ-TiAl phases was successfully fabricated using vacuum arc melting. To study its hot corrosion behaviour, the alloy was subjected to cyclic thermal loading under a Na2SO4 + 25wt.%NaCl molten ...
Magogodi Steven +3 more
doaj +1 more source
Fuzzy-TOPSIS Model for Optimization Hot Corrosion Resistance of Inconel718 Coated by Yttrium-doped Aluminizing-Siliconizing Process [PDF]
Engineering and Technology Journal, 2016 The objective of this study is to find out the optimum hot corrosion resistance and hardness for Inconel718 coated by simultaneous yttrium-doped aluminizing-siliconizingprocess.
Abbas Khammas Hussein +2 more
doaj +1 more source