Keraamipinnoitteiden valmistus HVOF-ruiskutuksella
Keraamien pinnoittaminen termisesti ruiskuttamalla suoritetaan yleisesti plasmaruiskutuksella. Keraamien pinnoittaminen HVOF-ruiskutuksella (suurnopeusliekkiruiskutuksella) on poikkeuksellista. Keraamien pinnoittaminen HVOF-ruiskutuksella on kuitenkin kiinnostavaa, koska näin valmistettujen keraamipinnoitteiden käyttöominaisuudet ovat ...
Korpiola, Kari, Jokinen, Petri
core +9 more sources
Numerical modeling the bonding mechanism of HVOF sprayed particles [PDF]
During high velocity oxy-fuel (HVOF) thermal spraying, most powder particles remain in solid state prior to the formation of coating. A finite element (FE) model is developed to study the impact of thermally sprayed solid particles on substrates and to establish the critical particle impact parameters needed for adequate bonding.
Kamnis, Su, Gu, Sai, Lu, T.J., Chen, C.
core +6 more sources
Nanostructured Ceramic HVOF Coatings for Improved Protection
Abstract The potential of the high velocity oxy-fuel (HVOF) thermal spray process to produce coatings with reduced porosity is well known. The ability to produce high density ceramic coatings offers potential in high performance applications in the fields of wear, corrosion resistance and dielectric coatings.
Turunen, Erja +5 more
core +5 more sources
Development of Nanostructured Al2O3- Ni HVOF coatings
HVOF thermal spraying has been developed to deposit dense Al2O3-coatings for improved protective properties. As compared to generally used plasma sprayed coatings HVOF coatings can be prepared much denser and thus are better suited for applications where protective properties of the coating are needed.
Hannula, Simo-Pekka +6 more
core +6 more sources
Ultrasonic phased-array inspection of HVOF-coated internal diameters of cylindrical components
High-velocity oxygen Fuel (HVOF) is a coating process that produces a dense, tightly bonded layer that significantly enhances wear resistance on the coated component.
Ricardo Baiotto +2 more
doaj +2 more sources
Oxidation in HVOF-Sprayed Steel [PDF]
Abstract It is widely held that most of the oxidation in thermally sprayed coatings occurs on the surface of the droplet after it has flattened. The evidence in this paper suggests that, for the conditions studied here, oxidation of the top surface of flattened droplets is not the dominant oxidation mechanism. In this study, a mild steel
Smith, M. F. +2 more
openaire +1 more source
Surface modification of HVOF thermal sprayed WC–CoCr coatings by laser treatment [PDF]
In this work the affects of laser characteristics on microstructure and microhardness of high velocity oxygen fuel sprayed (HVOF) WC–CoCr coatings were investigated.
A. Forn +20 more
core +2 more sources
Study on Composite CoNiCrAlY Coating with Super Fine Al2O3 Particles Sprayed by HVOF and APS [PDF]
Adding a certain amount of Al2O3 to MCrACY could improve its high temperature wear resistance. For this, CoNiCrAlY and micron Al2O3 powder particles were mixed in proportion and then milled in a sealed ball mill to obtain composite ...
CAO Bin, CHEN Xiong - wei, SUN Xiao - ping
doaj +1 more source
High-Velocity Oxygen Fuel (HVOF) Reinforcement of Amorphous Materials: A Pathway to Superior Wear and Corrosion Resistance [PDF]
The escalating demand for advanced structural materials with superior wear and corrosion resistance in aeronautical and military applications has spurred interest in amorphous alloys, particularly metallic glasses, due to their non-crystalline atomic ...
Emilia DOBRIN, Alin-Constantin MURARIU
doaj +1 more source
Investigation into laser re-melting of inconel 625 HVOF coating blended with WC [PDF]
High velocity oxy-fuel (HVOF) spraying of Diamalloy 1005 powders mixed with WC particles onto steel (304) is considered and laser re-melting of the resulting coatings is examined.
Al-Taha, Zuhair Y.
core +2 more sources

