Results 31 to 40 of about 665 (250)

Parameters design of voltage sharing components for the series multi‐break mechanical switch

open access: yesIET Science, Measurement & Technology, 2022
Series multi‐break mechanical switch is one of the critical components of high‐voltage hybrid DC circuit breakers. However, due to the existence of distributed capacitance, the voltage distribution between the breaks is not balanced.
Daochun Huang   +5 more
doaj   +1 more source

A hybrid circuit breaker based on current commutation approach for multi-feeder DC railway substations

open access: yesCSEE Journal of Power and Energy Systems, 2019
The paper presents an economic hybrid circuit breaker for limiting and interrupting the faults in DC railways substations. For fast fault current interruption, the hybrid breaker incorporates high speed mechanical contacts actuated by power semiconductor
Saady Hasan
doaj   +1 more source

Current Limiting Hybrid High Voltage DC Circuit Breaker With Reclosing Function Limiting

open access: yesJournal of Applied Science and Engineering, 2022
DC circuit breaker is the core equipment for the safe operation of DC transmission system. A current limiting hybrid HVDC circuit breaker topology with reclosing function is proposed in this paper.
Baoge Zhang   +4 more
doaj   +1 more source

Fault Interruption Scheme for HVDC System Using SiC-MESFET and VCB Based Hybrid Circuit Breaker

open access: yesIEEE Access, 2021
As high voltage DC power system is gaining popularity, power electronic switching devices are becoming increasingly advanced to overcome problems of timely fault isolation.
Waheed A. Khan   +6 more
doaj   +1 more source

A novel bidirectional nonuniform hybrid circuit breaker considering different direction protection requirements

open access: yesIET Power Electronics, 2022
Hybrid switching technologies such as zero voltage switching (ZVS) and zero current switching (ZCS) are widely accepted to protect DC power systems from different kinds of faults.
Zhuangxian Jiang   +5 more
doaj   +1 more source

Research on DC power flow controllable multi-port DC circuit breaker

open access: yesEnergy Reports, 2022
For the problem of fault isolation and power flow control in DC grid, this paper proposes a DC power flow controllable multi-port DC circuit breaker. Under the normal operation, this breaker has the function of DC power flow regulation, which is used to ...
Feng Xu   +5 more
doaj   +1 more source

Topology and control of a novel hybrid HVDC circuit breaker with self-powered capability

open access: yesEnergy Reports, 2022
Power supply for IGBT drive circuit of HVDC circuit breaker is a great challenge in practical engineering. At present, most of the HVDC circuit breakers rely on external power sources. This paper proposes a self-powered hybrid HVDC circuit breaker.
Huangqing Xiao   +4 more
doaj   +1 more source

A new hybrid DC circuit breaker topology

open access: yesIOP Conference Series: Earth and Environmental Science, 2018
Being advantageous for long-distance power transmission and new energy connection, DC system has wide range of applications in many scenarios. As the capacity of DC power grids increases, the fault current is more difficult to interrupt. And the DC circuit breaker which is very important for protecting DC grid attracts more and more attention of ...
C C Zhu   +5 more
openaire   +1 more source

Investigation of Impulse Aging of Energy-Absorption Elements for Hybrid DC Circuit Breakers

open access: yesApplied Sciences, 2023
The state of the energy-absorption branch MOV in the hybrid DC circuit breaker (DCCB) has a very important impact on the short fault breaking operation of the circuit breaker.
Xinyi Wang   +6 more
doaj   +1 more source

A control method of fault current in MT-HVDC grid based on current limiter and circuit breaker [PDF]

open access: yesArchives of Electrical Engineering, 2021
In order to realize selective isolation of fault lines in multi-terminal high voltage DC (MT-HVDC) grids, it is necessary to ensure that the sound lines can still transmit power normally after the grounding fault occurs in a DC power network.
Sihua Wang, Lei Zhao, Lijun Zhou
doaj   +1 more source

Home - About - Disclaimer - Privacy