Results 81 to 90 of about 1,114 (187)

Analyses of the Deformability and Chemistry of Non‐Metallic Inclusions in QT Steels With Increased Recycling‐Induced Tramp Element Content

steel research international, EarlyView.
This work uses high‐temperature dilatometry to examine how the tramp elements Cu, Ni, and Sn affect the deformability of non‐metallic inclusions and matrix in quench‐and‐temper steel. Mg‐bearing inclusions deform less than Mg‐free ones. Copper lowers formability. Nickel increases deformability.
Julian Cejka, Isabell Gruber, Gerald Klösch, Susanne Katharina Michelic   +3 more
wiley   +1 more source

Insights Into Paint‐Bake Toughening of Resistance Spot Welds of a 2.0 GPa Warm‐Stamped Medium‐Mn Steel

steel research international, EarlyView.
Paint baking of resistance spot welded joints of 2.0 GPa warm‐stamped medium‐Mn steel activates low‐temperature tempering, forming fine cementite in the fusion zone and enhancing toughness. Crack propagation resistance increases, shifting the failure mode from partial interfacial to complete pullout, with peak load and energy absorption rising ...
Sunusi Marwana Manladan, Savyasachi Nellikode, YeoJin Jang, Sumin Lee, Dileep Chandran Ramachandran, Sung‐bo Heo, Jinyoung Lee, Young‐Kook Lee, Yeong‐Do Park   +8 more
wiley   +1 more source

Tailoring Microstructure and Hardness in Maraging 300 Steel via 2.4 wt.% Niobium Addition and Controlled Aging Treatments

steel research international, EarlyView.
High Nb (2.4 wt.%) addition to Maraging 300 steel drives lattice distortion and nanoscale Nb–Mo‐rich precipitation, confirmed by energy‐dispersive X‐ray spectroscopy mapping (Mo ~5.4 wt.%, Nb ~2.5 wt.%). Nanoindentation reveals strong matrix hardening (H >4.8 GPa) at 480°C aging, while 560°C induces ~1.92 vol.% reverted austenite, enabling tunable ...
Laylla Sharon B. Peixoto, Mohammad Masoumi, Luís Henrique N. de Lima, Marcos Natan da Silva Lima, Luis Flávio Gaspar Herculano, Isabel Ferreira de Barros, Geronimo Perez, Maria Vittoria Moraschini Reis, Hamilton Ferreira Gome Abreu, Marcelo J. Gomes da Silva   +9 more
wiley   +1 more source

Crash Behavior of DP800–DP1000 Advanced High‐Strength Steel’s Dissimilar Resistance Spot Welded Joints Under Quasi‐static and High Strain Rates

steel research international, EarlyView.
The high‐strain‐rate behavior of resistance spot‐welded DP800–DP1000 joints is investigated. Results show that microstructural gradients across BM–HAZ–FZ govern hardness, strain rate sensitivity, and failure modes. While strength increases with strain rate, energy absorption is controlled by ductility, with DP800–DP800 joints showing superior ...
Pankaj Shrivastava, Velaphi Msomi
wiley   +1 more source

Tailored Hardening and Isothermal Bainitizing of Additively Manufactured Nitrogen‐Enhanced Martensitic Chromium Steel

steel research international, EarlyView.
Tailored heat treatments transform additively manufactured high‐nitrogen martensitic Cr steel from austenitic as‐built condition to high‐hardness states. Isothermal bainitizing at 250°C generates an ultrafine nanostructure and achieves higher hardness than conventional hardening and tempering, highlighting a promising postprocessing route for laser ...
Philip König, Sebastian Weber, Jonathan Lentz   +2 more
wiley   +1 more source

Study on the Polishing Mechanism of Composite Magnetic Field-Controlled Internal Flow Channels in Additive Manufacturing. [PDF]

Materials (Basel)
Li H, Wang R, Zhang J, Guo S, Su G, Du J, Li B, Zhang P, Xia Y, Sun Y.   +9 more
europepmc   +1 more source

Simple and detailed modeling of corrosion‐affected slender shear critical RC beams

Structural Concrete, EarlyView.
Abstract The corrosion of steel bars compromises both the safety and the serviceability of reinforced concrete (RC) structures. Consequently, reliable tools are required to estimate the detrimental effects of corrosion on the structural response of RC members subjected to transverse loads.
Nino Spinella, Pier Paolo Rossi
wiley   +1 more source

Nanoscale α Phase Enables Excellent Strength-Ductility Balance in TC21 Titanium Alloy. [PDF]

Nanomaterials (Basel)
Ma K, Jiang Z, Wu K, Shen Y, Wang Z.
europepmc   +1 more source

Rotation capacity of continuous reinforced concrete slab strips revisited

Structural Concrete, EarlyView.
Abstract Rotation capacity is a key characteristic of statically indeterminate reinforced concrete structures, as it (i) enables bending moment redistributions, whether intentionally introduced through optimized reinforcement layouts or arising from unforeseen self‐equilibrated stress states, and (ii) promotes large rotations at failure load, thereby ...
Nathalie Reckinger, Karel Thoma, Walter Kaufmann   +2 more
wiley   +1 more source

Design and performance evaluation of a novel cutter-ring material based on TBM rock-breaking mechanisms. [PDF]

Sci Rep
Zhong Z, Yang Z, Li X, Li Z, Tu Y.
europepmc   +1 more source