Results 41 to 50 of about 85,773 (149)

A Novel Approach to Produce Metal–Metal Composites by Leveraging Immiscibility: Laser Powder Bed Fusion of Nanosilver‐Dispersed Titanium

Advanced Engineering Materials, EarlyView.
Incorporating nanosized silver into titanium for antimicrobial materials exploits the metastable miscibility gap between silver and titanium. Silver nanoparticles are synthesized via pulsed laser ablation in liquid. Silver addition refines the microstructure, increases hardness by 30%, and reduces Staphylococcus capitis microbial adhesion by 70%, with ...
Hamed Shokri, Silja‐Katharina Rittinghaus, Janett Schmelzer, Jessica Bertrand, Bilal Gökce   +4 more
wiley   +1 more source

Maillard Type Reaction for Electroless Copper Plating onto Ceramic Nanoparticles

Advanced Engineering Materials, EarlyView.
This work presents the manufacturing of copper‐plated ceramic nanoparticles in an environmentally friendly way. Supported by organic functionalizations with pectin an electroless plating step can be performed. Sustainable reagents like xylose, and several amino acids are used for the reduction process.
Lukas Mielewczyk, Julia Grothe, Stefan Kaskel, Heinrich von Lintel, Katja Eichmann, Katrin Jahns, Avinash Hariharan, Abdelrahman Elsayed, Ulrich Krupp   +8 more
wiley   +1 more source

A Different Perspective on the Solid Lubrication Performance of Black Phosphorous: Friend or Foe?

Advanced Engineering Materials, EarlyView.
Researchers investigate black phosphorous (BP) as a standalone solid lubricant coating through ball‐on‐disc linear‐reciprocating sliding experiments in dry conditions. Testing on different metals shows BP doesn't universally reduce friction and wear. However, it achieves 33% friction reduction on rougher iron surfaces and 23% wear reduction on aluminum.
Matteo Vezzelli, Manel Rodríguez Ripoll, Sabine Schwarz, Ali Erdemir, Maria Clelia Righi, Carsten Gachot   +5 more
wiley   +1 more source

A Perspective on Powder Metallurgy and Additive Manufacturing of High‐Nitrogen Alloyed Stainless Steels

Advanced Engineering Materials, EarlyView.
This perspective article explores an innovative powder metallurgical approach to producing high‐nitrogen steels by utilizing a mixture of stainless steel and Si3N4. This mixture undergoes hot isostatic pressing followed by direct quenching. The article also examines adapting this method to laser powder bed fusion (PBF‐LB/M) to overcome nitrogen ...
Louis Becker, Felix Radtke, Jonathan Lentz, Simone Herzog, Christoph Broeckmann, Sebastian Weber   +5 more
wiley   +1 more source

Consolidate Overview of Ribonucleic Acid Molecular Dynamics: From Molecular Movements to Material Innovations

Advanced Engineering Materials, EarlyView.
Molecular dynamics simulations are advancing the study of ribonucleic acid (RNA) and RNA‐conjugated molecules. These developments include improvements in force fields, long‐timescale dynamics, and coarse‐grained models, addressing limitations and refining methods.
Kanchan Yadav, Iksoo Jang, Jong Bum Lee
wiley   +1 more source

Spray Deposition for Solvent Annealing of Hybrid Poly(3,4‐Ethylenedioxythiophene) Polystyrene Sulfonate Cellulose Silver Nanowire Composite Electrodes Using a Roll‐to‐Roll Coater

Advanced Engineering Materials, EarlyView.
The fabrication and post‐treatment via solvent annealing of poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate‐based electrodes using spray deposition in a roll‐to‐roll setup are presented. The decrease in sheet resistance and its correlation with nanostructure and molecular structure in the electrodes as a function of the processing parameters is ...
Marie Betker, Benedikt Sochor, Elisabeth Erbes, Alisher Kurmanbay, Tim Erichlandwehr, Yanan Li, Peter Müller‐Buschbaum, Irene Fernandez‐Cuesta, Simone A. Techert, L. Daniel Söderberg, Stephan V. Roth   +10 more
wiley   +1 more source

Enhancing Corrosion Resistance and Mechanical Strength of 3D‐Printed Iron Polylactic Acid for Marine Applications via Laser Surface Texturing

Advanced Engineering Materials, EarlyView.
Laser surface texturing significantly improves the corrosion resistance and mechanical strength of 3D‐printed iron polylactic acid (Ir‐PLA) for marine applications. Optimal laser parameters reduce corrosion by 80% and enhance tensile strength by 25% and ductility by 15%.
Mohammad Rezayat, Mojtaba Karamimoghadam, Mohammadreza Lalegani Dezaki, Ali Zolfagharian, Giuseppe Casalino, Antonio Mateo, Mahdi Bodaghi   +6 more
wiley   +1 more source

Influence of a Hydrogen Addition to the Inert Gas and Subsequent Heat Treatments on the Microstructure and Mechanical Properties of Magnesium WE43 Fabricated by PBF‐LB/M

Advanced Engineering Materials, EarlyView.
This article investigates optimal processing conditions for the laser‐based powder bed fusion of WE43. To limit the interaction with remaining oxygen, a 3 vol% hydrogen admixture to the inert gas is investigated. Furthermore, heat treatments are investigated in the range of 250–350 °C for 48 h.
Arvid Abel, Elmar Jonas Breitbach, Hannes Holländer, Michael Müller, Tjorben Griemsmann, Christian Klose, Jörg Hermsdorf, Hans Jürgen Maier, Stefan Kaierle, Ludger Overmeyer   +9 more
wiley   +1 more source

Microstructure, Mechanical Properties, and Antibacterial Performance of Novel Fe‐Mn‐Zn Nanocrystalline Alloys Produced by Mechanical Alloying

Advanced Engineering Materials, EarlyView.
This article presents the development of Fe‐Mn‐Zn nanocrystalline alloys (0–9 wt% Zn) by mechanical alloying and subsequently hot pressing. Their microstructure, density, hardness, wear resistance, corrosion behavior, and antibacterial properties are systematically examined.
Ilker Emin Dag, Funda Kilic, Mrutyunjay Panigrahi, Baris Avar   +3 more
wiley   +1 more source

Enhanced Mechanical Properties of Injectable Chitosan–Guar Gum Hydrogel Reinforced with Bacterial Cellulose Nanofibers for Tissue Engineering Applications

Advanced Engineering Materials, EarlyView.
This study presents the development and characterization of injectable nanocomposite hydrogels based on N‐succinyl chitosan, oxidized guar gum, and bacterial cellulose nanofibers. Emphasizing enhanced mechanical properties and biocompatibility, the hydrogels exhibit fast gelation, improved structural integrity, and reduced swelling. Their potential for
Raimundo Nonato Fernandes Moreira Filho, Pascale Chevallier, Silvia Rodriguez Fernandez, Maud Viallon, Matheus Xavier de Oliveira, Ana Lorena de Brito Soares, Diego Mantovani, Judith Pessoa de Andrade Feitosa, Rodrigo Silveira Vieira   +8 more
wiley   +1 more source