Results 161 to 170 of about 794,827 (201)

Converging Jet Impingement for Enhanced Liquid Cooling

Journal of Electronic Packaging, 2023
Abstract Jet impingement cooling is an advanced thermal management technique for high heat flux applications. Standard configurations include single, axisymmetric jets with orifice, slot, or pipe nozzles. This choice in nozzle shape, number of jets, and jet inclination greatly influences the turbulence generated by fluid entrainment due ...
Reece Whitt, Rafael Estrella, David Huitink   +2 more
openaire   +1 more source

A Numerical Investigation of Impinging Jet Cooling with Nanofluids

Nanoscale and Microscale Thermophysical Engineering, 2014
Nanofluids exhibit interesting heat transfer enhancement capabilities that may render them good candidates for use in industrial applications. They can be used as a cooling medium to spray onto the bottom of a piston to reduce the overall heat load during the operation of an engine.
Wang Peng, Lv Jizu, Bai Minli, Wang Yuyan, Hu Chengzhi   +4 more
openaire   +1 more source

Optimal synthesis of jet impingement cooling systems

International Journal of Heat and Mass Transfer, 2021
Abstract Authors analyze the structure of jet impingement systems used for computer cooling. We propose the algorithm for optimal synthesis of such systems. The total heat transfer coefficient is being minimized in this process. It corresponds to the minimization of the heat transfer surface when the heat flux is given.
A.M Tsirlin, I.A. Sukin, A.A. Demidov
openaire   +1 more source

Spot-Cooling by Confined, Impinging Synthetic Jet

Heat Transfer: Volume 3, 2003
Spot-cooling of discrete electronic packages mounted on a printed wiring board (PWB) is achieved by the impingement of an axisymmetric synthetic jet when the jet actuator is attached to one board and cools target integrated circuit (IC) on the opposite board.
Jelena Vukasinovic, Ari Glezer
openaire   +1 more source

Liquid Jet Impingement Cooling of a Rotating Disk

Journal of Heat Transfer, 1986
Results are presented from an experimental study conducted to determine the average convective heat transfer coefficient for the side of a rotating disk, with an approximately uniform surface temperature, cooled by a single liquid jet of oil impinging normal to the surface.
H. J. Carper, J. J. Saavedra, T. Suwanprateep   +2 more
openaire   +1 more source

Fluidic Oscillators in Impingement Jet Cooling: a Novel Configuration for Realizing Sweeping Jets

Volume 6: Heat Transfer: General Interest/ Additive Manufacturing Impacts on Heat Transfer; Heat Transfer: Internal Air Systems; Heat Transfer: Internal Cooling; Industrial & Cogeneration
Abstract This study examines integrating fluidic oscillators into a multi-jet impingement cooling system for turbomachinery, aiming to enhance heat transfer while reducing coolant requirements. The investigated configuration features multiple inline impingement jets within a square channel under self-induced cross-flow.
Brakmann, Robin, Carvalho, Francisco, Matha, Marcel, Morsbach, Christian, Pain, Camille, Pellé, Julien, Rairoux, Emilie, Schroll, Michael, Techen, Erik, Willert, Christian   +9 more
openaire   +2 more sources

Submerged Jet Impingement Cooling of a Nanostructured Plate

Volume 7: Fluid Flow, Heat Transfer and Thermal Systems, Parts A and B, 2010
In this paper, the results of a series of heat transfer experiments conducted on a compact electronics cooling device based on single phase jet impingement techniques are reported. Deionized-water is propelled into four microchannels of inner diameter 685 μm which are used as nozzles and located at a nozzle to surface distance of 2.5mm.
Muhsincan Sesen, Ali Kosar, Ebru Demir, Evrim Kurtoglu, Nazli Kaplan, Hadi Cagdas Erk, Wisam Khudhayer, Tansel Karabacak   +7 more
openaire   +1 more source

A Review of Impingement Jet Cooling in Combustor Liner

Volume 5C: Heat Transfer, 2018
Impingement jet cooling is a promising cooling method in modern dry low emission combustor because of its high local heat transfer coefficient. This paper investigates the recent research progress on impingement jet cooling in combustor liner. Firstly, the different flow characteristics in the different impingement jet flow regions are described. Then,
Rong Xie, Hao Wang, Baopeng Xu, Wei Wang
openaire   +1 more source

Electronic Cooling Using Synthetic Jet Impingement

Journal of Heat Transfer, 2006
The efficiency and mechanisms of cooling a constant heat flux surface by impinging synthetic jets were investigated experimentally and compared to cooling with continuous jets. Effects of jet formation frequency and Reynolds number at different nozzle-to-surface distances (H∕d) were investigated.
Anna Pavlova, Michael Amitay
openaire   +1 more source

Impingement cooling of a confined circular air jet

International Journal of Heat and Mass Transfer, 1997
A measurement of the local Nusselt number of a confined circular air jet vertically impinging on a flat plate is performed. The jet flow, after impingement, is constrained to exit in two opposite directions. Part of the impinging surface is maintained at a constant heat flux condition and the rest is adiabatic.
Jung-Yang San, Chin-Hao Huang, Ming-Hong Shu   +2 more
openaire   +1 more source