Results 61 to 70 of about 10,608,979 (207)
BioResources, 2006 The anatomical structure and chemical composition of the stem-wall material of giant reed is considered from the viewpoint of raw material characterization for industrial fiber production.
Pereira, H., Shatalov, A. A.
doaj
Kraft Pulping of Reduced Metal Content Eucalyptus Wood: Process Impacts
BioResources, 2015 The effect of using acid pretreated eucalyptus wood chips in the Lo-Solids® pulping process was evaluated in the laboratory. Lo-Solids® cooking technology was chosen to evaluate the impact of acid pretreatments on the cooking performance, brown stock ...
Ricardo B. Santos +2 more
doaj +1 more source
Advanced Chemical Engineering, Volume 1, Issue 2, December 2026.A nickel‐substituted polyoxometalate catalyst enables efficient lignin degradation into monoaromatic compounds in a methanol–water solution. ABSTRACT The transition from fossil‐based resources to renewable feedstocks is a cornerstone of industrial decarbonization.
Dorothea Voß +4 more
wiley +1 more source
Journal of Applied Polymer Science, Volume 143, Issue 40, October 20, 2026.The phosphorylation of milkweed fibers using the phosphate ester/urea system was optimized. The impact of reaction temperature, duration, and phosphate ester ratio on the efficiency of phosphorylation was investigated using the design of experiments approach.
Ahmed Azrrar +4 more
wiley +1 more source
Packaging Technology and Science, Volume 39, Issue 10, Page 1231-1251, October 2026.Cellulosic microfibres were extracted from almond shells using organosolv, soda and kraft processes, and comprehensive physicochemical, surface, thermal and morphological characterisation demonstrated their strong potential as sustainable fillers for paper‐based packaging application. ABSTRACT This study develops pathways for the valorisation of almond
Lokesh Kumar +4 more
wiley +1 more source
DELIGNIFICATION OF SUGARCANE BAGASSE WITH ALKALI AND PERACETIC ACID AND CHARACTERIZATION OF THE PULP
BioResources, 2010 Sugarcane bagasse was delignified with alkali and peracetic acid in a two-stage process to obtain pulps with high yield and low kappa number. The experimental results indicated that alkali pretreatment prior to peracetic acid (PAA) delignification could ...
Ting Zhang +3 more
doaj
Biomass‐Derived Laser‐Induced Graphene: From Precursor Chemistry to Device Integration
Rare Metals, Volume 45, Issue 10, October 2026.ABSTRACT Laser direct writing provides a mask‐free route for converting suitable carbon‐containing precursors into patterned, porous, and conductive laser‐induced graphene (LIG) networks. Although LIG was initially demonstrated mainly using aromatic synthetic polymers, such as polyimide, biomass precursors introduce renewable feedstocks with highly ...
Wanjun Yin +10 more
wiley +1 more source
On calcium-related problems in kraft pulping of Eucalyptus dunnii
, 2023 Kraft pulping is the most widely used pulping process for producing chemical pulp today. It has been in use for more than 130 years. During the pulping process most of the lignin and part of the hemicellulose are removed from the wood, resulting in an ...
Vegunta, Vijaya Lakshmi
core +2 more sources
BioResources, 2008 Pulping of bagasse by one-stage and three-stage peroxyacetic acid was carried out. Characterization of the precipitated lignin from the waste liquor of the pulping process was studied using infrared spec-troscopy.
A. M. A. Nada +2 more
doaj
Study on the Dynamic Viscoelasticity of Bamboo Kraft Black Liquor
BioResources, 2016 The dynamic viscoelasticity of bamboo kraft pulping black liquor under various temperatures (ranging from 50 to 80 °C) and solids concentrations (60 to 80 wt.%) was studied.
Yongjian Xu +4 more
doaj +1 more source