Results 21 to 30 of about 1,723,103 (300)
Polymer Testing, 2023 This study investigated the mechanical properties of bamboo-wood composite beams by conducting four-point bending static load tests on eight laminated beams.
Zichen Zhang, Zhenyu Qiu
doaj +1 more source
Influence of Densification on Bending Strength of Laminated Beech Wood
BioResources, 2015 This paper reports the influence of densification and cyclic loading on the bending strength of laminated beech (Fagus sylvatica L.). There have been many studies dealing with the bending strength of solid or laminated wood; however, densification is ...
Milan Gaff, Miroslav Gašparík
doaj +1 more source
Journal of the Korean Wood Science and Technology, 2020 1) For efficient use and expansion of domestic smalland medium-diameter woods, cross-laminated wood panels composed of tropical hardwoods and domestic temperate woods were fabricated, and the bending creep behavior under long-term loading was ...
Han-Min Park +3 more
semanticscholar +1 more source
INVESTIGATION ON LAMINATED WOOD (LB, LVL) MANUFACTURING [PDF]
تحقیقات علوم چوب و کاغذ ایران, 2001 Laminated beam ( LB.) and laminated veneer lumber ( LVL) manufactured from maple, hornbeam and beech wood is investigated. Three levels of press pressures at 30, 35, 40 kg/cm2, three levels of layer thicknesses of 2, 3, 4 mm and tangential and radial ...
Ahmad Jahan latibari +5 more
doaj +1 more source
European Journal of Wood and Wood Products, 2023 The paper presents a complex solution for testing loaded structural-sized glue laminated timber and innovative wood-carbon fibre reinforced polymers (CFRP) composite beams exposed to local fire.
B. Kawecki +3 more
semanticscholar +1 more source
Jurnal Penelitian Hasil Hutan (Journal of Forest Products Research), 2017 experimental laminated veneer ( 5 - ply ) were made from 12 wood species veneers glued with urea formaldehyde. Thickness of veneer was 1.5 mm and the range of veneer density was 0.38 - 0.83 g/cm3. Veneers were divided into 3 groups based on their densily
I M Sulastiningsih +2 more
doaj +1 more source
Effect of Cyclic Loading on Modulus of Elasticity of Aspen Wood
BioResources, 2014 This article investigates the modulus of elasticity of solid and laminated aspen wood of various thicknesses after cyclic loading. A three-point static bending test was carried out to determine the modulus of elasticity.
Milan Gaff, Miroslav Gašparík
doaj +1 more source
Cross laminated timber bonding quality for different brazilian species and pressing levels
Maderas: Ciencia y Tecnología, 2023 The proper choice of raw materials and manufacturing parameters for Cross Laminated Timber is essential to promote the proper bonding of the lamellas, aiming at their application in construction.
João Vítor Felippe Silva +4 more
doaj +1 more source
On the Endurance of Glued-Laminated Wood
journal of the Japan Society for Testing Materials, 1962 In the present report we have experimented on the bending fatigue strength of glued-laminated wood which is made of Japanese cypress and is glued with urea resin or phenol resin. For comparison, same experiments have been carried out also on solid Japanese cypress and beech with controled moisture content and air dried.
Yukihiko IBUKI +3 more
openaire +3 more sources
BALOK LAMINASI DARI KAYU KELAPA (Cocos nucifera L)
Jurnal Riset Industri Hasil Hutan, 2010 Laminated beams of two, three and four layers of coconut wood the bottom, middle and top part with PVAc adhesive (Poly Vinyl Acetat). The purpose of this research is to make coconut wood laminate beams for structural building materials.
Djoko Purwanto
doaj +1 more source