Results 41 to 50 of about 834,828 (289)

Bioinspired Hydrogels with Broadly Programmable Mechanics for Soft‐Tissue Interfaces

Advanced Functional Materials, EarlyView.
Sea cucumber‐inspired gelatin hydrogels are formed by directional freezing and mechanically programmed through subsequent ionic treatment. Multiscale characterization and modeling link ion‐regulated chain interactions to directional load transfer within the aligned hierarchical architecture.
Youchao Teng, TzuChun Chung, Katpady Akhil Tantry, Siyu Wu, Jing Tian, Yunqi Cui, Lanyu Li, Yongzan Zhou, Zhilei Zhang, Zhe Su, Gaili Cao, Kun‐Wei Yeh, Ruipeng Li, Xianghui Xiao, Adam F. G. Leontowich, Yuan‐Yu Hsueh, Zhao Pan, Kam C. Tam, Badri Narayanan, Song Li, Yimin. A. Wu   +20 more
wiley   +1 more source

Characteristics of Cold-Setting Adhesive Derived from Waste Styrofoam for Bonding Laminated Gmelina (Gmelina arborea) Wood

Jurnal Sylva Lestari
Developing cold-setting adhesives derived from waste styrofoam (WS) of expanded polystyrene foam for laminated gmelina wood involves innovative recycling of WS into functional adhesives.
Tati Karliati, Rudi Dungani, Anne Hadiyane, Wahyu Hidayat, Muhammad Adly Rahandi Lubis   +4 more
doaj   +1 more source

Leaftronics: Bio‐Fractal Scaffolds From Leaf Venation for Low‐Waste Electronics

Advanced Materials, EarlyView.
“Leaftronics” transforms naturally evolved leaf venation into quasi‐fractal scaffolds for sustainable electronics. Polymer‐infiltrated leaf skeletons can be used to fabricate ultra‐smooth, reflow‐ and thin‐film‐compatible decomposable substrates, while making the same lignocellulose networks conducting results in flexible transparent electrodes.
Rakesh Rajendran Nair, Hrisheekesh Thachoth Chandran, Karl Leo, Hans Kleemann   +3 more
wiley   +1 more source

Study on Innovative Laminated Flooring with Resin-Impregnated Paper

Buildings
A new type of laminated flooring decorated by resin impregnated paper (LWFWRIP) was designed, with the advantages of low formaldehyde emission, improved flame retardant, and high wear resistance.
Kankan Zhou, Jianhui Cheng, Minliang Fan
doaj   +1 more source

Bending Creep Performances of Hybrid Laminated Woods Composed of Wood-Wood Based Boards [PDF]

Journal of the Korean Wood Science and Technology, 2010
In this study, to study an effective use and improve strength performances of woods and wood-based materials, three-ply hybrid laminated woods which are composed of spruce in the face and three kinds of wood-based boards (MDF, PB, OSB) in the core were manufactured, and the effect of constitution elements used for the core laminae on bending creep ...
Han-Min Park, Dong-Hyun Kang, Yoon-Eun Choi, Sang-Yeol Ahn, Hyun-Su Ryu, Hee-Seop Byeon   +5 more
openaire   +1 more source

Field Testing and Evaluation of a Demonstration Timber Bridge;TR-604, February 2012 [PDF]

, 2012
Asphalt wearing surfaces are commonly used on timber bridges with transverse glued-laminated deck panel systems to help protect the timber components. However, poor performance of these asphalt wearing surfaces in the past has resulted in repeated repair

core  

Flax Composites With Improved Interfacial Strength Through Microbially Induced Mineral Precipitation

Advanced Materials, EarlyView.
A bio‐inspired biomineralization strategy introduces an additional hierarchy to flax fiber composites. By controlling microbe‐mediated mineral particle deposition through tuned salt concentrations, stress transfer within the natural fiber composite is enhanced.
Deniz Sayinbas, Ingo Nettersheim, Jeong‐Joo Oh, Marie‐Eve Aubin‐Tam, Julie Teuwen, Kunal Masania   +5 more
wiley   +1 more source

THE EFFECT OF SPECIES AND LAYER THICKNESS ON LAMINATED VENEER LUMBER (L. V. L.) MECHANICAL PROPERTIES [PDF]

تحقیقات علوم چوب و کاغذ ایران, 2004
Laminated veneer lumber (L. V. L) manufactured from Maple and Alder wood is investigated. Three levels of layer thicknesses of 2, 3 and 4mm. were investigated.
Amir Nourbakhsh, Taghi Tabarsa, Abolfazl Kargarfard, Fardad Golbabaei   +3 more
doaj   +1 more source

Bending Characteristics of Laminated Wood Composites Made of Poplar Wood and GFRP

Drvna industrija, 2021
In this study, 4 layers of 5 mm thick slats obtained by sawing method from poplar wood were used. Plain woven GRFP with low density and grammage of 100 g/m2 (Type 1) and plain woven GRFP with high density and grammage of 200 g/m2 (Type 2) were placed and glued between each layer.
Yildrim, Mehmet Nuri, Karaman, Abdurrahman, Zor, Mustafa   +2 more
openaire   +4 more sources

Nuclear Pore Mechanotransduction in Oncology: A Structural Axis of Vulnerability for Targeted Intervention

Advanced Materials, EarlyView.
Cancer‐associated NPC remodeling creates a high‐flux, low‐stringency nuclear state that supports malignant adaptation but increases mechanical fragility. Targeting the FG‐barrier or NPC scaffold may drive mechanostat failure, envelope rupture, DNA damage, and loss of nuclear integrity.
Sílvio Terra Stefanello, Caren Rigon Mizdal, Aline Franzen da Silva, Yun Qian, Wei‐En Yuan, Victor Shahin   +5 more
wiley   +1 more source