Results 11 to 20 of about 145,933 (265)
Behavior of Single Micropile Under Different Lateral Load Rates [PDF]
Engineering and Technology Journal, 2021 This paper displays an empirical work of a micropile inserted in the dry river sand with different length to diameter (L/D) ratios (13, 15, 27, 42, and 50).
Mohammed A. Al-Neami +2 more
doaj +1 more source
Geotechnics, 2022 Several studies have been reported in published literature on analytical solutions for a laterally loaded pile installed in a homogeneous single soil layer. However, piles are rarely installed in an ideal homogeneous single soil layer.
Prakash Ankitha Arvan +1 more
doaj +1 more source
Effect of Embedment and Spacing Ratios on the Response of Lateral Load of Single and Group Piles [PDF]
Engineering and Technology Journal, 2021 This paper displays an experimental work of three-scale model tests of single pile and nine–scale model tests of group pile (1x2) with spacing to diameter (S/D) ratios (2,4, and 6) respectively.
Mohammed Al-Neami +2 more
doaj +1 more source
Performance of rubberized concrete-filled hollow steel column under monotonic and cyclic loadings [PDF]
Archives of Civil Engineering, 2022 Concrete-filled hollow steel (CFHS) has become more popular due to its advantages and benefits compared to reinforced concrete. This paper presents the experimental investigation on the performance of rubberized pozzolanic concrete-filled hollowsteel ...
Muhammad Najmi Mohamad Ali Mastor +7 more
doaj +1 more source
MEDIAL-LATERAL LOADING AND WEAR IN TKA [PDF]
Journal of Biomechanics, 2008 Pre-clinical wear testing of Total Knee Arthroplasty has traditionally been carried out in a physical experiment [Fisher, 2002]. Recent computational models have been shown to have sufficient accuracy to be considered alongside these experiments [Knight, 2007].
Briscoe, Adam +2 more
openaire +2 more sources
Multi-objective optimization of outriggers in high-rise buildings subjected to wind loads
Revista IBRACON de Estruturas e Materiais, 2022 : This paper aims to investigate a methodology for determining the optimum floor positioning of outriggers (ORs) and belt-trusses (BTs) over tall buildings height.
Felipe Morrone Barbat Parfitt +2 more
doaj +1 more source
New hybrid foundation solutions for offshore wind turbines [PDF]
Archives of Civil EngineeringThis paper reviews latest developments of substructures for offshore wind turbines focusing on investigations and applications of hybrid foundations. Model tests and numerical analyses were used to simulate the loading of hybrid piles in sand.
Krzysztof Trojnar
doaj +1 more source
Bearing Characteristics of Multi-Wing Pile Foundations under Lateral Loads in Dapeng Bay Silty Clay
Journal of Marine Science and Engineering, 2022 This study provides a theoretical basis for reinforcement of the soil around multi-wing piles. Limit analysis was used to determine the ultimate lateral capacity (ULC) of three- and four-wing piles in Dapeng Bay silty clay.
Hao Wang +5 more
doaj +1 more source
Laboratory Study on the Strength Behaviour of Two Laterally Loaded Adobe Walls
Infrastructures, 2018 Adobe is a traditional construction technique found in historic and new construction throughout the world, often in earthquake-prone regions. Adobe structures are particularly susceptible to seismic forces due to their substantial mass and low tensile ...
Brad D. Weldon +4 more
doaj +1 more source
The Behavior of Piles Installed in Medium Dense Sand Within MSE Wall System [PDF]
Engineering and Technology Journal, 2021 Mechanically Stabilized Earth Walls (MSE) were widely used in several essential infrastructures, such as the abutments on a bridge. The need for a support base of a shallow or a deep bridge increased in the MSE wall system.
Salah Hamza +2 more
doaj +1 more source