Results 41 to 50 of about 22,985 (265)

Dense alumina-mullite composite ceramics from alumina and spodumene-albite feldspar binary mixtures: Processing and properties [PDF]

Science of Sintering, 2019
A processing strategy for obtaining alumina-spodumene ceramics from fine commercial powders is presented. In this work, a spodumene addition to calcined alumina powder was performed and their proportion was explored between 15 and 45 wt%.
Hernández M.F., López P.V., Violini A., Suárez G., Conconi M.S., Rendtorff N.M.   +5 more
doaj   +1 more source

Lithium Minerals and their Applications in the “Glass Age”

Estudios Geologicos
A brief review is provided of the applications of lithium mineral resources for the manufacture of vitreous materials: glass, enamels, and glass-ceramics.
Jesús Ma. Rincón, Pio Callejas Gómez, Manuel M. Jordán Vidal   +2 more
doaj   +1 more source

An investigation into the morphology and crystallization process of lithium borate glass containing vanadium oxide

Journal of Materials Research and Technology, 2022
A series of lithium borate glasses with V2O5 were successfully prepared by melt annealing. The glass-ceramics were made by heating the glass to the glass transition temperature (Tg), then heating it to the crystallization temperature (Tc), converting it ...
Ahmed H. Hammad, M. Sh. Abdel-wahab, Sajith Vattamkandathil   +2 more
doaj   +1 more source

A meta-analysis of the mechanical properties of ice-templated ceramics and metals [PDF]

, 2015
Ice templating, also known as freeze casting, is a popular shaping route for macroporous materials. Over the past 15 years, it has been widely applied to various classes of materials, and in particular ceramics.
Deville, Sylvain, Meille, Sylvain, Seuba, Jordi   +2 more
core   +3 more sources

Solid-State Chemistry with Nonmetal Nitrides [PDF]

, 1993
Among the nonmetal nitrides, the polymeric binary compounds BN and Si3N4are of particular interest for the development of materials for high-performance applications. The outstanding features of both substances are their thermal, mechanical, and chemical
Schnick, Wolfgang
core   +1 more source

The Effect of Surface Treatments on Zirconia Bond Strength and Durability

Journal of Functional Biomaterials, 2023
To evaluate the effects of airborne particle abrasion (APA) combined with MDP-containing resin cement, a glass-ceramic spray deposition (GCSD) method on the shear bond strengths (SBSs) and durability of 3 mol% yttrium oxide-stabilized zirconia ceramic ...
Dongni Shen, Huihua Wang, Ying Shi, Zhiwei Su, Matthias Hannig, Baiping Fu   +5 more
doaj   +1 more source

Bonding of the silane containing multi-mode universal adhesive for lithium disilicate ceramics

Restorative Dentistry & Endodontics, 2017
Objectives This study evaluated the influence of a multi-mode universal adhesive (MUA) containing silane (Single Bond Universal, 3M EPSE) on the bonding of resin cement to lithium disilicate.
Hyun-Young Lee, Geum-Jun Han, Juhea Chang, Ho-Hyun Son   +3 more
doaj   +1 more source

Investigation of Oxygen‐Free Wetting Behavior of Aluminum on Copper via Molecular Dynamics Simulations and Experiments

Advanced Engineering Materials, EarlyView.
The wettability of aluminum droplets (Al) on different copper substrates (Cu), where liquid Al spreads on solid Cu surfaces to form a liquid–solid interface, is studied numerically and experimentally. The experimental and numerical results show good agreement in the fast‐spreading regime.
Shan Lyu, Timon Steinhoff, Finn‐Lennard Janthur, Sarah Seffer, Jörg Hermsdorf, Christian Klose, Ludger Overmeyer, Hans‐Jürgen Maier, Nina Merkert   +8 more
wiley   +1 more source

Study of Corrosion Resistance and Degradation Mechanisms in LiTiO₂-Li₂TiO₃ Ceramic

Crystals, 2021
The interest in lithium-containing ceramics is due to their huge potential as blanket materials for thermonuclear reactors for the accumulation of tritium.
Dmitriy Shlimas, Artem L. Kozlovskiy, Maxim Zdorovets   +2 more
doaj   +1 more source

3D‐Printed Sulfur‐Derived Polymers With Controlled Architectures for Lithium‐Sulfur Batteries

Advanced Functional Materials, EarlyView.
Rheology‐guided formulation design for direct ink writing enables the fabrication of 3D sulfur copolymer cathodes with controlled architectures for lithium‐sulfur batteries. The printed electrodes exhibit multiscale porosity and high sulfur utilization, delivering enhanced electrochemical performance compared to conventional cast electrodes.
Bin Ling, Haoran Wang, Pan Yang, Rishav Agrawal, Alex R. Neale, Laurence J. Hardwick, Tom Hasell, Esther García‐Tuñón   +7 more
wiley   +1 more source